welcome page

Welcome to the Agilent E6651A Mobile WiMAX™ Test Set Help

Help Revision Date: May 26, 2010

This Help shows you how to use the Agilent E6651A Mobile WiMAX Test Set. It applies to both single and dual RF I/O port Test Sets, and to both Hardware Revisions A.1.x and A.2.x. It contains the following sections:

Introduction: A general overview of the E6651A features and general specifications.
Getting Started: A more detailed look at the front and rear panel features, display layout, and interconnections.
Base Station Emulation Mode: Using the Base Station Emulation functions for WiMAX Subscriber Station (SS) Testing.
Signal Analyzer Mode: Using the E6651A Signal Analyzer functions.
Signal Generator Mode: Using the E6651A as a WiMAX modulated RF source.
Setting Parameters: Simple configuration steps.
Menu System and Key Reference: Details of the E6651A menus systems and key descriptions.
Network Entry: How a WiMAX connection is established between the E6651A and the Subscriber Station.
Remote Interface Programming and Command Reference: Summary of the E6651A remote programming commands.

This help contains information up to and including release 6.6.1.0 and 5.6.1.0.

To download a portable version of this online help, in Microsoft HTML Help format (.chm), click here. IMPORTANT: Save this .chm file to your desktop. For Windows XP, right-click on the file and select Properties, then Unblock.

To ensure you have the most up-to-date version of the E6651A Test Set help, go to www.agilent.com/find/E6651A and click the link to the Product Library.