MeasurementInterval Property

Setting

Duration of each measurement (s)

[Visual C++ 6.0 / COM]
double GetMultiStepPower_MeasurementInterval();

void PutMultiStepPower_MeasurementInterval( double value );

[Visual Basic 6.0]
MultiStepPower_MeasurementInterval [ = value ]

[Visual Basic]
Public Property MeasurementInterval As Double

[C#]
public double MeasurementInterval {get; set;}

Property Value

Unit	s
Default	0.000 500 (500 µs)
Resolution	0.000 000 01 (10ns)
Minimum	-0.000 001 (-1µs)
Maximum	0.001 (1ms)

Remarks

This setting defines the duration each measurement.

Note that the product of the NumSteps in the waveform and the measurement interval must be less than or equal to 5.19218ms. If this is not the case then an InconsistentMultiStepPowerSettingsException is thrown when the measurement is initiated.

MeasurementMultiStepPower.MeasurementInterval Property

Property Value

Remarks

See Also