The Test Set has 3 operation modes within the Analyzer Mode. With Demodulator CW it is a tuned receiver and can measure only the frequency offset and average power of the input signal. With the Demodulator set to Bluetooth, a Bluetooth signal can be measured without establishing a link enabling additional measurement capability.
Default: CW.
Options: CW, Bluetooth 1.x and Bluetooth 2.0.
Save Recall Settings: The value is saved as part of the configuration (.gma) file.
Average Power.
Frequency Offset (from the value specified in the Frequency entry field).
Output Power.
Peak Power.
Average Power.
Modulation Characteristics.
deltaF2/deltaF1 Ratio.
deltaF2 Average.
deltaF2 Maximum.
deltaF1 Average.
ICFT.
Carrier Frequency Drift.
Carrier Frequency Drift Rate.
Carrier Frequency Drift.
With Demodulator Bluetooth 2.0
Differential Phase Encoding.
Secondary Results.
Bit Error Rate.
Packet Error Rate.
Modulation Accuracy.
Secondary Results.
99% DEVM.
Max Peak DEVM.
Max RMS DEVM.
wi + w0
w0 Block Frequency Error.
wi Initial Frequency Error.
DEVM Blocks.
Relative Transmit Power.
Average Guard Interval.
Calculated Packet Type.
Power Difference.
DPSK Power.
GFSK Power.