With option 404 (MIMO/Multi-port Connectivity ) the Decouple mode explained as below:
Last Updated: June 19, 2009
Use this command to turn source decoupling ON/OFF and decouple the source from the RF IN/OUT RF spigot to the RF OUT spigot.
Setting Range: OFF | ON | 0 | 1
Preset and *RST: ON | 1
Test Set Requirements: N8300A Wireless Networking Test Set Version A.06.50 and above.
Example:
SOURce:DECouple OFF
Uses the RF IN/OUT spigot.
SOURce:DECouple?
Returns the current state.
|
|
With option 404 (MIMO/Multi-port Connectivity ) the Decouple mode explained as below:
|