Front and Rear Panel Symbols

Last Updated: June 19, 2009

  

       

This symbol is used to indicate power ON (green LED).

 

This symbol is used to indicate power STANDBY mode (yellow LED).

~

 

 

This symbol indicates the input power required is AC.

 

 

The instruction documentation symbol. The product is marked with this symbol when it is necessary for the user to refer to instructions in the documentation.

 

 

The CE mark is a registered trademark of the European Community.

 

The C-Tick mark is a registered trademark of the Australian Spectrum Management Agency.

 

This is a marking of a product in compliance with the Canadian

Interference-Causing Equipment Standard (ICES-001).

This is also a symbol of an Industrial Scientific and Medical Group 1 Class A product (CISPR 11, Clause 4).

 

The CSA mark is a registered trademark of the Canadian Standards Association International.

 

This symbol indicates separate collection for electrical and electronic equipment mandated under EU law as of August 13, 2005. All electric and electronic equipment are required to be separated from normal waste for disposal (Reference WEEE Directive 2002/96/EC).

To return unwanted products, contact your local Agilent office, or see
http://www.agilent.com/environment/product/ for more information.

 

The out position of a bi-stable push control switch

 

The In position of a bi-stable push control switch

 

Indicates a Protective Conductor Terminal that must be connected to earth ground before operating the equipment protects against electrical shock in case of a fault.

Warning

 

Warning denotes a hazard.  It calls attention to a procedure which, if not correctly performed or adhered to, could result in injury or loss of life.  Do not proceed beyond a warning note until indicated conditions are fully understood and met.

Caution

 

Caution denotes a hazard.  It calls attention to a procedure which, if not correctly performed or adhered to, could result in damage to or destruction of the instrument.  Do not proceed beyond a caution note until the indicated conditions are fully understood and met.