How Do I Change CDMA System Time Parameters?

How Do I Change CDMA System Time Parameters?

Last updated: May 24, 2006

A. Select CDMA System Time Parameters Menu.

  1. Press the CALL SETUP key.
  2. Press the left More key, go to Call Control 2 of 2 (in the Test Application) or Call Control 2 of 3 (in the Lab Application).
  3. Select Access Network Info ( F2 ), go to AN Info menu.
  4. Select CDMA System Time / Sync Info ( F5 ).
  5. Select CDMA System Time Parms ( F1 ) key.

B. Set CDMA System Time Parameters.

  1. Turn the knob to highlight a parameter and then press the knob.
  2. Enter a value and press the knob. The entered values will be shown on CDMA System Time Information window and updated in every two seconds.

       
    NOTE
    The CDMA System Time (Date) and the CDMA System Time (Time) can only be changed when the test set is in idle state. See Operating Consideration .
       

  3. Select Close Menu ( F6 ).

Related Topics

CDMA System Time Parameters

How Do I Perform Multi-unit Synchronization?