How Do I Change the Measurement Setup?

A. Select the Measurement to Set Up.

To set up a measurement, you must bring it to the top window position on the measurement screen. If the measurement you wish to set up is already in the top window position, proceed to step B below.

To bring a measurement to the top window position, you can:

1. Press the Measurement selection key.
2. Highlight the measurement you wish to set up, and press the knob.

Or, if the measurement is already active but in the bottom window position, you may:

1. Select Swap Window Positions ( F5 ).

B. Set Up the Measurement.

1. Press the MEASUREMENT key.
   
2. Select (Measurement) Setup ( F1 ) to display the measurement's setup menu.
3. Highlight a parameter and press the knob.

4. Enter a value or selection and press the knob.

   Note

   For statistical measurement results, highlight the Multi-Measurement Count parameter and press the ON key. The number of averages will default to 10.