CALL:MS

Function

Sets/queries Ack Channel Gain. See ACK Channel Gain .

Requirements:

Setting

Range: -3 to +6 dB

Resolution: 0.5 dB

Query

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:ACKGain 4" 
! Sets the Ack Channel gain to +4 dB.

Function

Sets/queries the power level of the R-Auxiliary Pilot channel relative to the power of the R-Data channel. It is used by the AT to compute the transmit power of the R-Auxiliary Pilot channel if transmitted. For details, see Auxiliary Pilot Channel Gain .

Requirements

Setting

Range: -15 to 0 dB
Resolution: 1 dB

Query

Range: same as setting

*RST Setting

-12 dB

Programming Example

 
OUTPUT 714;"CALL:MS:APGain -10"
! Sets R-Auxiliary Pilot Channel Level relative to
! R-Data channel to -10 dB.

Function

Sets/queries the minimum R-Data payload size at which point the AT is required to transmit the R-Aux Pilot channel. See Auxiliary Pilot Channel Min Payload for details.

Requirements

Setting

Range: BIT128|BIT256|BIT512|BIT768|BIT1024|BIT1536|BIT2048|BIT3072
|BIT4096|BIT6144|BIT8192|BIT12288

Query

Range: same as setting

*RST Setting

BIT3072

Programming Example

 
OUTPUT 714;"CALL:MS:APPayload BIT2048"
! Sets R-Aux Pilot minimum payload size to 2048 bits.

Range: 0 to 45 characters of an valid IPv6 address, this can be a normal 39- character IPv6 address, a zero compression IPv6 address or a up to 45-character IPv4 address-compatible address (see IPv6 Address Requirements ). Ranges are from

• "" (Null) or
• 2000:0000:0000:0000:0000:0000:0000:0000 to 3FFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF or
• FC00:0000:0000:0000:0000:0000:0000:0000 to FDFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF or
• FE80:0000:0000:0000:0000:0000:0000:0000 to FEBF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF

Range: 39 characters of IPv6 address with the format: AAAA:BBBB:CCCC:DDDD:EEEE:FFFF:GGGG:HHHH. Each of the A, B, ... H is an hex number ranging from 0 to F.

*RST Setting

Lab Application Revision: C.00.08 and above

Programming Example

 
OUTPUT 714;"CALL:MS:CSCF:PROXy:IP:ADDRess:IP6?" 
! Queries the DUT IPv6 P-CSCF server address

 
OUTPUT 714;"CALL:MS:CSCF:PROXy:IP:ADDRess:IP6 'FE80:1111:2222:3333:4444:5555:6666:7777'" 
! Set the DUT IPv6 P-CSCF server address to FE80:1111:2222:3333:4444:5555:6666:7777

 
OUTPUT 714;"CALL:MS:CSCF:PROXy:IP:ADDRess:IP6 'FE80::1'" 
! Set the DUT IPv6 P-CSCF server address to FE80::1

 
OUTPUT 714;"CALL:MS:CSCF:PROXy:IP:ADDRess:IP6 '2009::146.208.232.220'" 
! Set the DUT IPv6 P-CSCF server address to 2009::146.208.232.220

Function

Sets/queries Data Offset Nom. See Data Offset Nom .

This is a "Configurable Attribute" that is set during session negotiation. Its value can not be changed while call limit mode is on (see Call Limit Mode ).

Requirements:

Setting

Range: -4.0 to +3.5 dB

Resolution: 0.5 dB

Query

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:DOFFset:NOMinal -2.5" 
!Sets the nominal offset to -2.5 dB.

Function

Sets/queries Data Offset <rate>. See Data Offset 9k6|19k2|38k4|76k8|153k6 .

This is a "Configurable Attribute" that is set during session negotiation. Its value can not be changed while call limit mode is on (see Call Limit Mode ).

Requirements:

Setting

Range: -2.0 to +1.75 dB

Resolution: 0.25 dB

Query

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:DOFFset:BPS38400 -1.5"
! Sets the Data Offset 38k4 to -1.5 dB.

Function

Sets/queries the DRC Channel gain. See DRC Channel Gain .

Requirements:

Setting

Range: -9 to +6 dB

Resolution: 0.5 dB

Query

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:DRCGain 4" 
! Sets the DRC Channel gain to +4 dB.

Function

Sets/queries the length of slots the access terminal shall use to transmit a single DRC value. See DRC Length for details.

Requirements

Setting

Range: 2, 4, 8

Query

Range: same as setting

*RST Setting

8 (slots)

Programming Example

 
OUTPUT 714;"CALL:MS:DRCLength SLOT2"
! Sets R-DRC transmission duration to 2 slots.

Function

Sets/queries the power of the R-DSC channel relative to the power of the R-Pilot channel. The R-DSC channel is expected to be transmitted from the AT when operating at physical layer subtype 2. See DSC Channel Gain .

Requirements

Setting

Range: -15.5 to 0 dB
Resolution: 0.5 dB

Query

Range: same as setting

*RST Setting

-9 dB

Programming Example

 
OUTPUT 714;"CALL:MS:DSCGain -10"
! Sets R-DSC Channel Level relative to
! R-Pilot channel to -10 dB.

Function

Sets/queries the length of a single DSC transmission (in units of 8 slots). See DSC Length .

Requirements

Setting

Range: 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120, 128, 136, 144, 152,
160, 168, 176, 184, 192, 200, 208, 216, 224, 232, 240, 248, 256

Query

Range: same as setting

*RST Setting

64 (slots)

Programming Example

 
OUTPUT 714;"CALL:MS:DSCLength 16"
! Sets R-DSC transmission duration to 16 slots.

Function

Sets/queries the DUT DNS Server Addresses Setup .

Query

*RST Setting

Non-volatile

Requirements

Lab Application Revision: B.00 and above

Lab Application Revision: C.00.08 and above, added [:IP4]

Programming Example

 
OUTPUT 714;"CALL:MS:DNSServer:PRIMary:IP:ADDRess '146.201.225.125'" 
! Sets the DUT Primary DNS Server IP Address to 146.201.225.125.

Range: 0 to 45 characters of an valid IPv6 address, this can be a normal 39- character IPv6 address, a zero compression IPv6 address or a up to 45-character IPv4 address-compatible address (see IPv6 Address Requirements ). Ranges are from

• "" (Null) or
• 2000:0000:0000:0000:0000:0000:0000:0000 to 3FFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF or
• FC00:0000:0000:0000:0000:0000:0000:0000 to FDFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF or
• FE80:0000:0000:0000:0000:0000:0000:0000 to FEBF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF

Range: 39 characters of IPv6 address with the format: AAAA:BBBB:CCCC:DDDD:EEEE:FFFF:GGGG:HHHH. Each of the A, B, ... H is an hex number ranging from 0 to F.

*RST Setting

Lab Application Revision: C.00.08 and above

Programming Example

 
OUTPUT 714;"CALL:MS:DNSServer:PRIMary:IP:ADDRess:IP6?" 
! Queries the DUT IPv6 DNS Server address

 
OUTPUT 714;"CALL:MS:DNSServer:PRIMary:IP:ADDRess:IP6 'FE80:1111:2222:3333:4444:5555:6666:7777'" 
! Set the DUT IPv6 DNS Server address to FE80:1111:2222:3333:4444:5555:6666:7777

 
OUTPUT 714;"CALL:MS:DNSServer:PRIMary:IP:ADDRess:IP6 'FE80::1'" 
! Set the DUT IPv6 DNS Server address to FE80::1

 
OUTPUT 714;"CALL:MS:DNSServer:PRIMary:IP:ADDRess:IP6 '2009::146.208.232.220'" 
! Set the DUT IPv6 DNS Server address to 2009::146.208.232.220

Function

Sets/queries the DUT DNS Server Addresses Setup .

Setting

Range: 0 to 15 characters formatted as A.B.C.D
The range of values for A = 0 to 126 and 128 to 223. The range of values for B, C, and D = 0 to 255.

Query

*RST Setting

Non-volatile

Requirements

Lab Application Revision: B.00 and above

Lab Application Revision: C.00.08 and above, added [:IP4]

Programming Example

 
OUTPUT 714;"CALL:MS:DNSServer:SECondary:IP:ADDRess '146.201.225.125'" 
! Sets the DUT Secondary DNS Server IP Address to 146.201.225.125.

Function

Sets/queries the IP address for a wireless device (such as an access terminal). See DUT IP Address for details.

This setting is stored in nonvolatile RAM and will NOT be changed by a reset, power cycle operations.

This setting has no effect if the CALL:DATA:PDSNode:EXTernal:STATe is set to On.

Requirements

Lab Application Revision: A.01 and above

Setting

Range: 15 characters formatted as follows: A.B.C.D.
The range of values for A= 0 to 126 and 128 to 223. The range of values for B,C, D = 0 to 255 (no embedded spaces).

Query

Range: same as setting.

*RST Setting

• 0.0.0.1 (when shipped from the factory)
• the value last set and stored in the nonvolatile RAM

Programming Example

 
OUTPUT 714;"CALL:MS:IP:ADDRess `130.29.179.219'" 
!Sets the DUT IP Address to 130.29.179.219.

Function

1xEVDO LA

This command enable or disable forwarding of subnet traffic to the DUT IP Address. See DUT Routing State for more information.

Requirements

1x EVDO LA

Revision: B.00 and above

Setting

Range:1 | ON | 0 | OFF

Query

Range: 0 | 1

*RST Setting

0 | OFF

Programming Example

 
OUTPUT 714;"CALL:MS:IP:ADDRESS:ROUTing:STATe OFF" 
! Set route IP address to the DUT's state OFF. 

Lab Application Revision: C.00.08 and above

Range: IP4 | IP6 | DUAL

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:IP:VERSion IP4" 
! Set the DUT IP Version to IPv4.

Function

Sets/queries DRC Length of the Aux 1 unit. See DRC Length .

This setting is set on the Main unit and sent to the Aux unit(s) via LAN.

Requirements

Setting

Range: SLOT2 | SLOT4 |SLOT8

Query

Range: same as setting

*RST Setting

SLOT8

Programming Example

 
OUTPUT 714;"CALL:MS:MCARrier:AUXiliary:DRCLength SLOT8"
! Sets the DRC Length of the Aux 1 unit to SLOT8.

Function

Sets/queries the DRC Length of the Aux 2 unit. See DRC Length .

This setting is set on the Main unit and sent to the Aux unit(s) via LAN.

Requirements

Setting

Range: SLOT2 | SLOT4 |SLOT8

Query

Range: same as setting

*RST Setting

SLOT8

Programming Example

 
OUTPUT 714;"CALL:MS:MCARrier:AUXiliary2:DRCLength SLOT8"
! Sets the DRC Length of the Aux 2 unit to SLOT8.

Function

Sets/queries the DRC Channel Gain of the Aux 1 unit. See DRC Channel Gain .

This setting is set on the Main unit and sent to the Aux unit(s) via LAN.

Requirements

Setting

Query

Range: same as setting

*RST Setting

3 dB

Programming Example

 
OUTPUT 714;"CALL:MS:MCARrier:AUXiliary:DRCGain 4"
! Sets the DRC Channel Gain of the Aux 1 unit to +4 dB.

Function

Sets/queries the DRC Channel Gain of the Aux 2 unit. See DRC Channel Gain .

This setting is set on the Main unit and sent to the Aux unit(s) via LAN.

Requirements

Setting

Range: -9 to +6 dBResolution: 0.5 dB

Query

Range: same as setting

*RST Setting

3 dB

Programming Example

 
OUTPUT 714;"CALL:MS:MCARrier:AUXiliary2:DRCGain 4"
! Sets the DRC Channel Gain of the Aux 2 unit to +4 dB.

Function

Sets/queries the ACK Channel Gain of the Aux 1 unit. See ACK Channel Gain .

This setting is set on the Main unit and sent to the Aux unit(s) via LAN.

Requirements

Setting

Range: -3 to +6 dBResolution: 0.5 dB

Query

Range: same as setting

*RST Setting

3 dB

Programming Example

 
OUTPUT 714;"CALL:MS:MCARrier:AUXiliary:ACKGain 4"
! Sets the ACK Channel Gain of the Aux 1 unit to +4 dB.

Function

Sets/queries the ACK Channel Gain of the Aux 2 unit. See ACK Channel Gain .

This setting is set on the Main unit and sent to the Aux unit(s) via LAN.

Requirements

Setting

Range: -3 to +6 dBResolution: 0.5 dB

Query

Range: same as setting

*RST Setting

3 dB

Programming Example

 
OUTPUT 714;"CALL:MS:MCARrier:AUXiliary2:ACKGain 4"
! Sets the ACK Channel Gain of the Aux 2 unit to +4 dB.

Function

Sets/queries the power backoff to use when multiple carriers are transmitted. See Multicarrier AT Max Power Backoff .

Requirements

Setting

Range: 0.0 to 10.0 dBResolution: 0.1 dB

Query

Range: same as setting

*RST Setting

0.0 dB

Programming Example

 
OUTPUT 714;"CALL:MS:MCARrier:POWer:MAXimum:BACKoff 0.0"
! Sets the power backoff to 0 dB.

Function

Sets/queries the Pilot Drop parameter. See Pilot Drop .

Requirements:

Setting

Range: 0 to 63

Resolution: 1

Query

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:PDRop 28" 
! Sets Pilot Drop to 28 (-14 dB).

Function

Sets/queries the maximum power expected from the AT for the specified band. See AT Max Power .

The optional [:SELected] keyword in this command specifies that the maximum power being set or queried applies to the current cell band (see Cell Band ).

Requirements:

Test Application Revision: A.01.20 and above
Lab Application Revision: A.01 and above
Test Application Revision: A.06 and above: Support USPCs1900
Lab Application Revision: A.03 and above: Support USPCs1900
Test Application Revision: A.07 and above: Support AWService
Lab Application Revision: A.04 and above: Support AWService
Test Application Revision: A.09 and above: Support CELLular700
Lab Application Revision: C.00.00 and above: Support PAMR400, PAMR800, PSAFety700, CLOWer700

Setting

Range: (DBM8 = +8 dBm, for example)

• IMT2000: DBM8|DBM13|DBM18|DBM20|DBM23|DBM28
• JCDMa: DBM23|DBM27|DBM31
• KPCS: DBM8|DBM13|DBM18|DBM23|DBM28
• NMT450: DBM18|DBM23|DBM28|DBM33
• CELLular700: DBM23|DBM27
• SECondary800: DBM23|DBM27
• USCellular: DBM23|DBM27|DBM31
• USPCs: DBM8|DBM13|DBM18|DBM23|DBM28
• USPCs1900: DBM8|DBM13|DBM18|DBM23|DBM28
• AWService: DBM8|DBM13|DBM18|DBM23|DBM28
• PAMR400: DBM33|DBM28|DBM23|DBM18PAMR800: DBM31|DBM27|DBM23
• PSAFety700: DBM27|DBM23
• CLOWer700: DBM27|DBM23

Query

*RST Setting

• [:SELected]: DBM23 (because *RST causes the IS-856 Band to be set to US PCS)
• IMT2000: DBM18
• JCDMa, KPCs, NMT450, CELLular700, SECondary800, USCellular, USPCs, USPCs1900, AWService, PAMR 400, PAMR 800, Public Safety 700, Lower 700: DBM23

Programming Example

 
OUTPUT 714;"CALL:MS:POWer:MAXimum DBM28" 
! Sets the AT Max Power for the currently selected band to +28 dBm.

 
OUTPUT 714;"CALL:MS:POW:MAXimum:KPCS DBM13" 
! Sets the AT Max Power for Korean PCS band to +13 dBm.

Function

Queries the Decimal Hardware ID. It returns as a string. See Hardware ID .

Requirements:

Test Application Revision: A.01.20 and above
Test Application Revision: A.05 and above: query range changes

Lab Application Revision: A.01 and above
Lab Application Revision: A.02.10 and above: query range changes

Query

Range:

• "" (Null) (when a Hardware ID is not reported)
• 12 characters in the form "xxx-xxxxxxx" where the x's are characters from the set 0123456789 (when Hardware ID Type = 0x010000 for ESN)
• 19 characters in the form of "xxxxxxxxxx-xxxxxxxx", where the x's are characters from the set 0123456789 (when Hardware ID Type = 0x00FFFF for MEID) - added since Test Application A.05 and Lab Application A.02.10
• "0" to "4294967295" (1 to 10 characters from the set 0123456789) (when Hex Hardware ID Type = 0x00NNNN for IETF RFC 1700 standard)
• "0" to "72057594037927935" (1 to 17 characters from the set 0123456789) (when Hex Hardware ID Type is invalid) - added since Test Application A.05 and Lab Application A.02.10

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:HIDentity?" 
! Queries the Decimal Hardware ID.

Function

Queries the HardwareIDValue reported by the AT in hexadecimal format. It returns as a string. See Hardware ID .

Requirements:

Test Application Revision: A.01.20 and above
Test Application Revision: A.05 and above: query range added "0x00000000000000" to "0xFFFFFFFFFFFFFF"

Lab Application Revision: A.01 and above
Lab Application Revision: A.02.10 and above: query range added "0x00000000000000" to "0xFFFFFFFFFFFFFF"

Query

Range:

• "" (Null)
• "0x00000000" to "0xFFFFFFFF" (0x plus 8 characters from the set 0123456789ABCDEF)
  (Hardware ID Type = 0x010000 for ESN, or Hardware ID Type = 0x00NNNN for IETF RFC 1700 standard)
• "0x00000000000000" to "0xFFFFFFFFFFFFFF" (0x plus 14 characters from the set 0123456789ABCDEF)
  (Hardware ID Type = 0x00FFFF for MEID or invalid)

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:HIDentity:HEX?"
! Queries the Hex Hardware ID.

Function

Queries the Hardware ID Type received from the AT. See Hardware ID Type for details.

Requirements:

Test Application Revision: A.01.20 and above
Test Application Revision: A.05 and above: added "0x00FFFF" return value

Lab Application Revision: A.01 and above
Lab Application Revision: A.02.10 and above: added "0x00FFFF" return value

Query

Range:

• "" (Null)
• "0x000000" to "0xFFFFFF" (0x plus 6 characters from the set 0123456789ABCDEF)
  • "0x010000" indicates Hardware ID Type is ESN.
  • "0x00FFFF" indicates Hardware ID Type is MEID
  • "0x00NNNN" indicates a Hardware ID "NNNN" from IETF RFC 1700 standard.
  • "0xFFFFFF" indicates Hardware ID value is null when queried by CALL:MS:REPorted:HIDentity[:DECimal]? or CALL:MS:REPorted:HIDentity:HEX? .
  • all other values are invalid.

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:HIDentity:TYPE?"
! Queries Hardware ID Type

Function

Queries the Session Seed. See Session Seed .

Requirements:

Query

Range:

• '' (0 characters), or
• 0x followed by 8 characters from the set 0123456789ABCDEF (example: '0x00123ABC')

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:SSEed?"
! Queries the Session Seed.

Function

Sets/queries the RRI Channel Gain Pre-Transition 0 which is used with the current T2P Transition value and current subpacket being transmitted to determine the current gain of the R-RRI Channel (relative to R-Pilot channel). See RRI Gain Parameters for details.

Requirements

Setting

Range: - 8 to +7 dB
Resolution: 1 dB

Query

Range: same as setting

*RST Setting

0 dB

Programming Example

 
OUTPUT 714;"CALL:MS:RRIGain:TRANsition0:PRE -2"
! Sets RRI Channel Gain Pre-Transition 0 to -2 dB.

Function

Sets/queries the RRI Channel Gain Post-Transition 0 which is used with the current T2P Transition value and current subpacket being transmitted to determine the current gain of the R-RRI Channel (relative to R-Pilot channel). See RRI Gain Parameters for details.

Requirements

Setting

Range: - 8 to +7 dB
Resolution: 1 dB

Query

Range: same as setting

*RST Setting

-6 dB

Programming Example

 
OUTPUT 714;"CALL:MS:RRIGain:TRANsition0:POST -2"
! Sets RRI Channel Gain Post-Transition 0 to -2 dB.

Function

Sets/queries the RRI Channel Gain Pre-Transition 1 which is used with the current T2P Transition value and current subpacket being transmitted to determine the current gain of the R-RRI Channel (relative to R-Pilot channel). See RRI Gain Parameters for details.

Requirements

Setting

Range: - 8 to +7 dB
Resolution: 1 dB

Query

Range: same as setting

*RST Setting

0 dB

Programming Example

 
OUTPUT 714;"CALL:MS:RRIGain:TRANsition1:PRE -2"
! Sets RRI Channel Gain Pre-Transition 1 to -2 dB.

Function

Sets/queries the RRI Channel Gain Post-Transition 1 which is used with the current T2P Transition value and current subpacket being transmitted to determine the current gain of the R-RRI Channel (relative to R-Pilot channel). See RRI Gain Parameters for details.

Requirements

Setting

Range: - 8 to +7 dB
Resolution: 1 dB

Query

Range: same as setting

*RST Setting

-6 dB

Programming Example

 
OUTPUT 714;"CALL:MS:RRIGain:TRANsition1:POST -2"
! Sets RRI Channel Gain Post-Transition 1 to -2 dB.

Function

Sets/queries the RRI Channel Gain Pre-Transition 2 which is used with the current T2P Transition value and current subpacket being transmitted to determine the current gain of the R-RRI Channel (relative to R-Pilot channel). See RRI Gain Parameters for details.

Requirements

Setting

Range: - 8 to +7 dB
Resolution: 1 dB

Query

Range: same as setting

*RST Setting

-6 dB

Programming Example

 
OUTPUT 714;"CALL:MS:RRIGain:TRANsition2:PRE -2"
! Sets RRI Channel Gain Pre-Transition 2 to -2 dB.

Function

Sets/queries the RRI Channel Gain Post-Transition 2 which is used with the current T2P Transition value and current subpacket being transmitted to determine the current gain of the R-RRI Channel (relative to R-Pilot channel). See RRI Gain Parameters for details.

Requirements

Setting

Range: - 8 to +7 dB
Resolution: 1 dB

Query

Range: same as setting

*RST Setting

-6 dB

Programming Example

 
OUTPUT 714;"CALL:MS:RRIGain:TRANsition2:POST -2"
! Sets RRI Channel Gain Post-Transition 2 to -2 dB.

Function

Sets/queries the RRI Channel Gain Pre-Transition 3 which is used with the current T2P Transition value and current subpacket being transmitted to determine the current gain of the R-RRI Channel (relative to R-Pilot channel). See RRI Gain Parameters for details.

Requirements

Setting

Range: - 8 to +7 dB
Resolution: 1 dB

Query

Range: same as setting

*RST Setting

-6 dB

Programming Example

 
OUTPUT 714;"CALL:MS:RRIGain:TRANsition3:PRE -2"
! Sets RRI Channel Gain Pre-Transition 3 to -2 dB.

Function

This immediate action causes the parameters for Flow 01 Preset/Maximum Throughput Pre Configure active. See MAC Flow NN Pre Configure for details.

Requirements

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:PREConfigure:PRESet"
! Causes the Flow 01 Preset/Maximum Throughput Pre Configure active.

Function

This immediate action causes the parameters for Flow 01 IS-856 Protocol Default Values Pre Configure active. See MAC Flow NN Pre Configure for details.

Requirements

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:PREConfigure:DEFault856"
! Causes the Flow 01 IS-856 Protocol Default Values Pre Configure active.

Function

This immediate action causes the parameters for Flow 01 SIP/RTCP Pre Configure active. See MAC Flow NN Pre Configure for details.

Requirements

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:PREConfigure:CONTrol"
! Causes the Flow 01 SIP/RTCP Pre Configure active.

Function

This immediate action causes the parameters for Flow 01 Video 64k Pre Configure active. See MAC Flow NN Pre Configure for details.

Requirements

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:PREConfigure:VKBPs64"
! Causes the Flow 01 Video 64k Pre Configure active.

Function

This immediate action causes the parameters for Flow 01 Audio for Video 64k Pre Configure active. See MAC Flow NN Pre Configure for details.

Requirements

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:PREConfigure:AFVKbps64"
! Causes the Flow 01 Audio for Video 64k Pre Configure active.

Function

This immediate action causes the parameters for Flow 01 Best Effort Pre Configure active. See MAC Flow NN Pre Configure for details.

Requirements

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:PREConfigure:BEFFort"
! Causes the Flow 01 Best Effort Pre Configure active.

Function

This immediate action causes the parameters for Flow 01 Gaming Pre Configure active. See MAC Flow NN Pre Configure for details.

Requirements

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:PREConfigure:GAMing"
! Causes the Flow 01 Gaming Pre Configure active.

Function

This immediate action causes the parameters for Flow 01 Voice over IP Pre Configure active. See MAC Flow NN Pre Configure for details.

Requirements

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:PREConfigure:VOIP"
! Causes the Flow 01 Voice over IP Pre Configure active.

Function

Sets/queries the merge threshold (in octets) for the MAC FLow 01 if transmitted in High Capacity Mode.

Requirements

Setting

Range: OCTet0|OCTet32|OCTet128|OCTet1024|OCTet4096|OCTet8192|INFinite

Query

Range: same as setting

*RST Setting

Infinite octets

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:MTHReshold 4096"
! Sets the merge threshold for the MAC FLow 01 to 4096 octets.

Function

Sets/queries the minimum value of the permitted T2PInflow for the MAC Flow 01.

Requirements

Setting

Range: 0.00 to 63.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

62.00 dB

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:T2Pilot:INFlow:MINimum 20.00"
! Sets the minumum T2P Inflow to 20 dB.

Function

Sets/queries the maximum value of the permitted T2PInflow for the MAC Flow 01.

Requirements

Setting

Range: 0.00 to 63.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

63.75 dB

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:T2Pilot:INFlow:MAXimum 20.00"
! Sets the maximum T2P Inflow to 20 dB.

Function

Sets/queries the value of T2P Filter Time Constant which is used to compute the average T2P for the MAC Flow 01.

Requirements

Setting

Range: SUBFrame16|SUBFrame24|SUBFrame32|SUBFrame64|SUBFrame128

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:T2Pilot:FTConstant SUBFrame32"
! Sets the value of T2P Filter Time Constant to 32 subframes.

Function

Sets/queries the maximum T2P resource that can be accumulated (bucket size) for the MAC Flow 01.

Requirements

Setting

Range: 0 to 63.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:BLEVel:MAXimum 50"
! Sets the value of maximum bucket level to 50.00 dB.

Function

Sets/queries the maximum duration (in sub-frames) for which the MAC Flow 01 can sustain a peak rate based on its T2P allocation

Requirements

Setting

Range: SUBFrame4|SUBFrame8|SUBFrame16|SUBFrame32

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:BDURation SUBFrame32"
! Sets the value of burst deration factor to 32 subframes.

Function

Sets/queries the transmission mode for the MAC FLow 01. HCAPacity represents High Capacity and LLATency represents Low Latency. See Reverse Data Transmission Mode .

Requirements

Setting

Range: HCAPacity|LLATency

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TRANsmission LLATency"
! Sets the transmission mode for MAC Flow 01 to Low Latency.

Function

Sets/queries the number of Bucket Factor T2P Axis for MAC Flow 01 and defines the size of the RTC MAC Flow 01 Bucket Factor T2P Axis and FTC MAC Flow 01 Bucket Factor T2P Axis FRAB Values arrays.

Requirements

Setting

Range: 1 to 2

Resolution: 1

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:BFACtor:AXIS:T2Pilot:COUNt 1"
! Sets the number of bucket factor T2P axis to 1.

Function

Sets/queries the number of Bucket Factor FRAB Axis for MAC Flow 01 and defines the size of the RTC MAC Flow 01 Bucket Factor T2P Axis and FTC MAC Flow 01 Bucket Factor T2P Axis FRAB Values arrays.

Requirements

Setting

Range: 1 to 3

Resolution: 1

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:BFACtor:AXIS:FRAB:COUNt 2"
! Sets the number of bucket factor FRAB axis to 2.

Function

Sets/queries the value of Bucket Factor T2P Axis 00 for MAC Flow 01.

Requirements

Setting

Range: 0 to 63.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:BFACtor:AXIS:T2Pilot00 50.00"
! Sets the value of Bucket Factor T2P Axis 00 for MAC Flow 01 to 50 dB.

Function

Sets/queries the value of Bucket Factor T2P Axis 01 for MAC Flow 01.

Requirements

Setting

Range: 0 to 63.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:BFACtor:AXIS:T2Pilot01 50.00"
! Sets the value of Bucket Factor T2P Axis 01 for MAC Flow 01 to 50 dB.

Function

Sets/queries the value of Bucket Factor FRAB Axis 0 for MAC Flow 01.

Requirements

Setting

Range: -1 to 0.875 dB

Resolution: 0.125 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:BFACtor:AXIS:FRAB0 0.75"
! Sets the value of Bucket Factor FRAB Axis 0 for MAC Flow 01 to 0.75 dB.

Function

Sets/queries the value of Bucket Factor FRAB Axis 1 for MAC Flow 01.

Requirements

Setting

Range: -1 to 0.875 dB

Resolution: 0.125 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:BFACtor:AXIS:FRAB1 0.75"
! Sets the value of Bucket Factor FRAB Axis 1 for MAC Flow 01 to 0.75 dB.

Function

Sets/queries the value of Bucket Factor FRAB Axis 2 for MAC Flow 01.

Requirements

Setting

Range: -1 to 0.875 dB

Resolution: 0.125 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:BFACtor:AXIS:FRAB2 0.75"
! Sets the value of Bucket Factor FRAB Axis 2 for MAC Flow 01 to 0.75 dB.

Function

Sets/queries the value of Bucket Factor T2P Axis 00 FRAB Axis 0 for MAC Flow 01.

Requirements

Setting

Range: 1 to 32.875 dB

Resolution: 0.125 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:BFACtor:AXIS:T00Frab0 20"
! Sets the value of Bucket Factor T2P Axis 00 FRAB Axis 0 for MAC Flow 01 to 20.00 dB.

Function

Sets/queries the value of Bucket Factor T2P Axis 00 FRAB Axis 1 for MAC Flow 01.

Requirements

Setting

Range: 1 to 32.875 dB

Resolution: 0.125 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:BFACtor:AXIS:T00Frab1 20"
! Sets the value of Bucket Factor T2P Axis 00 FRAB Axis 1 for MAC Flow 01 to 20.00 dB.

Function

Sets/queries the value of Bucket Factor T2P Axis 00 FRAB Axis 2 for MAC Flow 01.

Requirements

Setting

Range: 1 to 32.875 dB

Resolution: 0.125 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:BFACtor:AXIS:T00Frab2 20"
! Sets the value of Bucket Factor T2P Axis 00 FRAB Axis 2 for MAC Flow 01 to 20.00 dB.

Function

Sets/queries the value of Bucket Factor T2P Axis 01 FRAB Axis 0 for MAC Flow 01.

Requirements

Setting

Range: 1 to 32.875 dB

Resolution: 0.125 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:BFACtor:AXIS:T01Frab0 20"
! Sets the value of Bucket Factor T2P Axis 01 FRAB Axis 0 for MAC Flow 01 to 20.00 dB.

Function

Sets/queries the value of Bucket Factor T2P Axis 01 FRAB Axis 1 for MAC Flow 01.

Requirements

Setting

Range: 1 to 32.875 dB

Resolution: 0.125 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:BFACtor:AXIS:T01Frab1 20"
! Sets the value of Bucket Factor T2P Axis 01 FRAB Axis 1 for MAC Flow 01 to 20.00 dB.

Function

Sets/queries the value of Bucket Factor T2P Axis 01 FRAB Axis 2 for MAC Flow 01.

Requirements

Setting

Range: 1 to 32.875 dB

Resolution: 0.125 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:BFACtor:AXIS:T01Frab2 20"
! Sets the value of Bucket Factor T2P Axis 01 FRAB Axis 2 for MAC Flow 01 to 20.00 dB.

Function

Sets/queries the number of T2P Transition Function T2P Axis for MAC Flow 01.

Requirements

Setting

Range: 1 to 4

Resolution: 1

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:AXIS:T2Pilot:COUNt 3"
! Sets the number of T2P Transition Function T2P Axis for MAC Flow 01 to 3.

Function

Sets/queries the number of T2P Transition Function FRAB Axis for MAC Flow 01.

Requirements

Setting

Range: 1 to 5

Resolution: 1

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:AXIS:FRAB:COUNt 3"
! Sets the number of T2P Transition Function FRAB Axis for MAC Flow 01 to 3.

Function

Sets/queries the value of T2P Transition Function T2P Axis 00 for MAC Flow 01.

Requirements

Setting

Range: 0 to 63.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:AXIS:T2Pilot00 50"
! Sets the value of T2P Transition Function T2P Axis 00 for MAC Flow 01 to 50.00 dB.

Function

Sets/queries the value of T2P Transition Function T2P Axis 01 for MAC Flow 01.

Requirements

Setting

Range: 0 to 63.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:AXIS:T2Pilot01 50"
! Sets the value of T2P Transition Function T2P Axis 01 for MAC Flow 01 to 50.00 dB.

Function

Sets/queries the value of T2P Transition Function T2P Axis 02 for MAC Flow 01.

Requirements

Setting

Range: 0 to 63.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:AXIS:T2Pilot02 50"
! Sets the value of T2P Transition Function T2P Axis 02 for MAC Flow 01 to 50.00 dB.

Function

Sets/queries the value of T2P Transition Function T2P Axis 03 for MAC Flow 01.

Requirements

Setting

Range: 0 to 63.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:AXIS:T2Pilot03 50"
! Sets the value of T2P Transition Function T2P Axis 03 for MAC Flow 01 to 50.00 dB.

Function

Sets/queries the value of T2P Transition Function FRAB Axis 0 for MAC Flow 01.

Requirements

Setting

Range: -1.0 to 0.875 dB

Resolution: 0.125 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:AXIS:FRAB0 0.5"
! Sets the value of T2P Transition Function FRAB Axis 0 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Transition Function FRAB Axis 1 for MAC Flow 01.

Requirements

Setting

Range: -1.0 to 0.875 dB

Resolution: 0.125 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:AXIS:FRAB1 0.5"
! Sets the value of T2P Transition Function FRAB Axis 1 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Transition Function FRAB Axis 2 for MAC Flow 01.

Requirements

Setting

Range: -1.0 to 0.875 dB

Resolution: 0.125 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:AXIS:FRAB2 0.5"
! Sets the value of T2P Transition Function FRAB Axis 2 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Transition Function FRAB Axis 3 for MAC Flow 01.

Requirements

Setting

Range: -1.0 to 0.875 dB

Resolution: 0.125 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:AXIS:FRAB3 0.5"
! Sets the value of T2P Transition Function FRAB Axis 3 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Transition Function FRAB Axis 4 for MAC Flow 01.

Requirements

Setting

Range: -1.0 to 0.875 dB

Resolution: 0.125 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:AXIS:FRAB4 0.5"
! Sets the value of T2P Transition Function FRAB Axis 4 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Up T2P Axis 00 FRAB Axis 0 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:UP:AXIS:T00Frab0 20"
! Sets the value of T2P Up T2P Axis 00 FRAB Axis 0 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Up T2P Axis 00 FRAB Axis 1 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:UP:AXIS:T00Frab1 20"
! Sets the value of T2P Up T2P Axis 00 FRAB Axis 1 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Up T2P Axis 00 FRAB Axis 2 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:UP:AXIS:T00Frab2 20"
! Sets the value of T2P Up T2P Axis 00 FRAB Axis 2 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Up T2P Axis 00 FRAB Axis 3 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:UP:AXIS:T00Frab3 20"
! Sets the value of T2P Up T2P Axis 00 FRAB Axis 3 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Up T2P Axis 00 FRAB Axis 4 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:UP:AXIS:T00Frab4 20"
! Sets the value of T2P Up T2P Axis 00 FRAB Axis 4 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Up T2P Axis 01 FRAB Axis 0 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:UP:AXIS:T01Frab0 20"
! Sets the value of T2P Up T2P Axis 01 FRAB Axis 0 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Up T2P Axis 01 FRAB Axis 1 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:UP:AXIS:T01Frab1 20"
! Sets the value of T2P Up T2P Axis 01 FRAB Axis 1 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Up T2P Axis 01 FRAB Axis 2 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:UP:AXIS:T01Frab2 20"
! Sets the value of T2P Up T2P Axis 01 FRAB Axis 2 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Up T2P Axis 01 FRAB Axis 3 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:UP:AXIS:T01Frab3 20"
! Sets the value of T2P Up T2P Axis 01 FRAB Axis 3 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Up T2P Axis 01 FRAB Axis 4 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:UP:AXIS:T01Frab4 20"
! Sets the value of T2P Up T2P Axis 01 FRAB Axis 4 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Up T2P Axis 02 FRAB Axis 0 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:UP:AXIS:T02Frab0 20"
! Sets the value of T2P Up T2P Axis 02 FRAB Axis 0 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Up T2P Axis 02 FRAB Axis 1 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:UP:AXIS:T02Frab1 20"
! Sets the value of T2P Up T2P Axis 02 FRAB Axis 1 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Up T2P Axis 02 FRAB Axis 2 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:UP:AXIS:T02Frab2 20"
! Sets the value of T2P Up T2P Axis 02 FRAB Axis 2 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Up T2P Axis 02 FRAB Axis 3 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:UP:AXIS:T02Frab3 20"
! Sets the value of T2P Up T2P Axis 02 FRAB Axis 3 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Up T2P Axis 02 FRAB Axis 4 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:UP:AXIS:T02Frab4 20"
! Sets the value of T2P Up T2P Axis 02 FRAB Axis 4 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Up T2P Axis 03 FRAB Axis 0 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:UP:AXIS:T03Frab0 20"
! Sets the value of T2P Up T2P Axis 03 FRAB Axis 0 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Up T2P Axis 03 FRAB Axis 1 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:UP:AXIS:T03Frab1 20"
! Sets the value of T2P Up T2P Axis 03 FRAB Axis 1 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Up T2P Axis 03 FRAB Axis 2 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:UP:AXIS:T03Frab2 20"
! Sets the value of T2P Up T2P Axis 03 FRAB Axis 2 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Up T2P Axis 03 FRAB Axis 3 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:UP:AXIS:T03Frab3 20"
! Sets the value of T2P Up T2P Axis 03 FRAB Axis 3 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Up T2P Axis 03 FRAB Axis 4 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:UP:AXIS:T03Frab4 20"
! Sets the value of T2P Up T2P Axis 03 FRAB Axis 4 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Down T2P Axis 00 FRAB Axis 0 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:DOWN:AXIS:T00Frab0 20"
! Sets the value of T2P Down T2P Axis 00 FRAB Axis 0 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Down T2P Axis 00 FRAB Axis 1 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:DOWN:AXIS:T00Frab1 20"
! Sets the value of T2P Down T2P Axis 00 FRAB Axis 1 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Down T2P Axis 00 FRAB Axis 2 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:DOWN:AXIS:T00Frab2 20"
! Sets the value of T2P Down T2P Axis 00 FRAB Axis 2 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Down T2P Axis 00 FRAB Axis 3 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:DOWN:AXIS:T00Frab3 20"
! Sets the value of T2P Down T2P Axis 00 FRAB Axis 3 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Down T2P Axis 00 FRAB Axis 4 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:DOWN:AXIS:T00Frab4 20"
! Sets the value of T2P Down T2P Axis 00 FRAB Axis 4 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Down T2P Axis 01 FRAB Axis 0 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:DOWN:AXIS:T01Frab0 20"
! Sets the value of T2P Down T2P Axis 01 FRAB Axis 0 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Down T2P Axis 01 FRAB Axis 1 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:DOWN:AXIS:T01Frab1 20"
! Sets the value of T2P Down T2P Axis 01 FRAB Axis 1 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Down T2P Axis 01 FRAB Axis 2 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:DOWN:AXIS:T01Frab2 20"
! Sets the value of T2P Down T2P Axis 01 FRAB Axis 2 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Down T2P Axis 01 FRAB Axis 3 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:DOWN:AXIS:T01Frab3 20"
! Sets the value of T2P Down T2P Axis 01 FRAB Axis 3 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Down T2P Axis 01 FRAB Axis 4 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:DOWN:AXIS:T01Frab4 20"
! Sets the value of T2P Down T2P Axis 01 FRAB Axis 4 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Down T2P Axis 02 FRAB Axis 0 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:DOWN:AXIS:T02Frab0 20"
! Sets the value of T2P Down T2P Axis 02 FRAB Axis 0 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Down T2P Axis 02 FRAB Axis 1 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:DOWN:AXIS:T02Frab1 20"
! Sets the value of T2P Down T2P Axis 02 FRAB Axis 1 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Down T2P Axis 02 FRAB Axis 2 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:DOWN:AXIS:T02Frab2 20"
! Sets the value of T2P Down T2P Axis 02 FRAB Axis 2 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Down T2P Axis 02 FRAB Axis 3 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:DOWN:AXIS:T02Frab3 20"
! Sets the value of T2P Down T2P Axis 02 FRAB Axis 3 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Down T2P Axis 02 FRAB Axis 4 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:DOWN:AXIS:T02Frab4 20"
! Sets the value of T2P Down T2P Axis 02 FRAB Axis 4 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Down T2P Axis 03 FRAB Axis 0 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:DOWN:AXIS:T03Frab0 20"
! Sets the value of T2P Down T2P Axis 03 FRAB Axis 0 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Down T2P Axis 03 FRAB Axis 1 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:DOWN:AXIS:T03Frab1 20"
! Sets the value of T2P Down T2P Axis 03 FRAB Axis 1 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Down T2P Axis 03 FRAB Axis 2 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:DOWN:AXIS:T03Frab2 20"
! Sets the value of T2P Down T2P Axis 03 FRAB Axis 2 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Down T2P Axis 03 FRAB Axis 3 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:DOWN:AXIS:T03Frab3 20"
! Sets the value of T2P Down T2P Axis 03 FRAB Axis 3 for MAC Flow 01 to 0.50 dB.

Function

Sets/queries the value of T2P Down T2P Axis 03 FRAB Axis 4 for MAC Flow 01.

Requirements

Setting

Range: -32.00 to 31.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow01:TTFunction:DOWN:AXIS:T03Frab4 20"
! Sets the value of T2P Down T2P Axis 03 FRAB Axis 4 for MAC Flow 01 to 0.50 dB.

Function

This immediate action causes the parameters for Flow 02 Preset/Maximum Throughput Pre Configure active. See MAC Flow NN Pre Configure for details.

Requirements

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:PREConfigure:PRESet"
! Causes the Flow 02 Preset/Maximum Throughput Pre Configure active.

Function

This immediate action causes the parameters for Flow 02 IS-856 Protocol Default Values Pre Configure active. See MAC Flow NN Pre Configure for details.

Requirements

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:PREConfigure:DEFault856"
! Causes the Flow 02 IS-856 Protocol Default Values Pre Configure active.

Function

This immediate action causes the parameters for Flow 02 SIP/RTCP Pre Configure active. See MAC Flow NN Pre Configure for details.

Requirements

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:PREConfigure:CONTrol"
! Causes the Flow 02 SIP/RTCP Pre Configure active.

Function

This immediate action causes the parameters for Flow 02 Video 64k Pre Configure active. See MAC Flow NN Pre Configure for details.

Requirements

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:PREConfigure:VKBPs64"
! Causes the Flow 02 SIP/RTCP Pre Configuree active.

Function

This immediate action causes the parameters for Flow 02 Audio for Video 64k Pre Configure active. See MAC Flow NN Pre Configure for details.

Requirements

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:PREConfigure:AFVKbps64"
! Causes the Flow 02 Audio for Video 64k Pre Configure active.

Function

This immediate action causes the parameters for Flow 02 Best Effort Pre Configure active. See MAC Flow NN Pre Configure for details.

Requirements

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:PREConfigure:BEFFort"
! Causes the Flow 02 Best Effort Pre Configure active.

Function

This immediate action causes the parameters for Flow 02 Gaming Pre Configure active. See MAC Flow NN Pre Configure for details.

Requirements

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:PREConfigure:GAMing"
! Causes the Flow 02 Gaming Pre Configure active.

Function

This immediate action causes the parameters for Flow 02 Voice over IP Pre Configure active. See MAC Flow NN Pre Configure for details.

Requirements

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:PREConfigure:VOIP"
! Causes the Flow 02 Voice over IP Pre Configure active.

Function

Sets/queries the merge threshold (in octets) for the MAC FLow 02 if transmitted in High Capacity Mode.

Requirements

Setting

Range: OCTet0|OCTet32|OCTet128|OCTet1024|OCTet4096|OCTet8192|INFinite

Query

Range: same as setting

*RST Setting

Infinite octets

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:MTHReshold 4096"
! Sets the merge threshold for the MAC FLow 02 to 4096 octets.

Function

Sets/queries the minimum value of the permitted T2PInflow for the MAC Flow 02.

Requirements

Setting

Range: 0.00 to 63.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

62.00 dB

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:T2Pilot:INFlow:MINimum 20.00"
! Sets the minumum T2P Inflow to 20 dB.

Function

Sets/queries the maximum value of the permitted T2PInflow for the MAC Flow 02.

Requirements

Setting

Range: 0.00 to 63.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

63.75 dB

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:T2Pilot:INFlow:MAXimum 20.00"
! Sets the maximum T2P Inflow to 20 dB.

Function

Sets/queries the value of T2P Filter Time Constant which is used to compute the average T2P for the MAC Flow 02.

Requirements

Setting

Range: SUBFrame16|SUBFrame24|SUBFrame32|SUBFrame64|SUBFrame128

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:T2Pilot:FTConstant SUBFrame32"
! Sets the value of T2P Filter Time Constant to 32 subframes.

Function

Sets/queries the maximum T2P resource that can be accumulated (bucket size) for the MAC Flow 02.

Requirements

Setting

Range: 0 to 63.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:BLEVel:MAXimum 50"
! Sets the value of maximum bucket level to 50.00 dB.

Function

Sets/queries the maximum duration (in subframes) for which the MAC Flow 02 can sustain a peak rate based on its T2P allocation

Requirements

Setting

Range: SUBFrame4|SUBFrame8|SUBFrame16|SUBFrame32

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:BDURation SUBFrame32"
! Sets the value of burst deration factor to 32 subframes.

Function

Sets/queries the transmission mode for the MAC FLow 02. HCAPacity represents High Capacity and LLATency represents Low Latency. See Reverse Data Transmission Mode .

Requirements

Setting

Range: HCAPacity|LLATency

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:TRANsmission LLATency"
! Sets the transmission mode for MAC Flow 02 to Low Latency.

Function

Sets/queries the number of Bucket Factor T2P Axis for MAC Flow 02 and defines the size of the RTC MAC Flow 02 Bucket Factor T2P Axis and FTC MAC Flow 02 Bucket Factor T2P Axis FRAB Values arrays.

Requirements

Setting

Range: 1 to 2

Resolution: 1

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:BFACtor:AXIS:T2Pilot:COUNt 1"
! Sets the number of bucket factor T2P axis to 1.

Function

Sets/queries the number of Bucket Factor FRAB Axis for MAC Flow 02 and defines the size of the RTC MAC Flow 02 Bucket Factor T2P Axis and FTC MAC Flow 02 Bucket Factor T2P Axis FRAB Values arrays.

Requirements

Setting

Range: 1 to 3

Resolution: 1

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:BFACtor:AXIS:FRAB:COUNt 2"
! Sets the number of bucket factor FRAB axis to 2.

Function

Sets/queries the value of Bucket Factor T2P Axis 00 for MAC Flow 02.

Requirements

Setting

Range: 0 to 63.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:BFACtor:AXIS:T2Pilot00 50.00"
! Sets the value of Bucket Factor T2P Axis 00 for MAC Flow 02 to 50 dB.

Function

Sets/queries the value of Bucket Factor T2P Axis 01 for MAC Flow 02.

Requirements

Setting

Range: 0 to 63.75 dB

Resolution: 0.25 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:BFACtor:AXIS:T2Pilot01 50.00"
! Sets the value of Bucket Factor T2P Axis 01 for MAC Flow 02 to 50 dB.

Function

Sets/queries the value of Bucket Factor FRAB Axis 0 for MAC Flow 02.

Requirements

Setting

Range: -1 to 0.875 dB

Resolution: 0.125 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:BFACtor:AXIS:FRAB0 0.75"
! Sets the value of Bucket Factor FRAB Axis 0 for MAC Flow 02 to 0.75 dB.

Function

Sets/queries the value of Bucket Factor FRAB Axis 1 for MAC Flow 02.

Requirements

Setting

Range: -1 to 0.875 dB

Resolution: 0.125 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:BFACtor:AXIS:FRAB1 0.75"
! Sets the value of Bucket Factor FRAB Axis 1 for MAC Flow 02 to 0.75 dB.

Function

Sets/queries the value of Bucket Factor FRAB Axis 2 for MAC Flow 02.

Requirements

Setting

Range: -1 to 0.875 dB

Resolution: 0.125 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:BFACtor:AXIS:FRAB2 0.75"
! Sets the value of Bucket Factor FRAB Axis 2 for MAC Flow 02 to 0.75 dB.

Function

Sets/queries the value of Bucket Factor T2P Axis 00 FRAB Axis 0 for MAC Flow 02.

Requirements

Setting

Range: 1 to 32.875 dB

Resolution: 0.125 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:BFACtor:AXIS:T00Frab0 20"
! Sets the value of Bucket Factor T2P Axis 00 FRAB Axis 0 for MAC Flow 02 to 20.00 dB.

Function

Sets/queries the value of Bucket Factor T2P Axis 00 FRAB Axis 1 for MAC Flow 02.

Requirements

Setting

Range: 1 to 32.875 dB

Resolution: 0.125 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:BFACtor:AXIS:T00Frab1 20"
! Sets the value of Bucket Factor T2P Axis 00 FRAB Axis 1 for MAC Flow 02 to 20.00 dB.

Function

Sets/queries the value of Bucket Factor T2P Axis 00 FRAB Axis 2 for MAC Flow 02.

Requirements

Setting

Range: 1 to 32.875 dB

Resolution: 0.125 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:BFACtor:AXIS:T00Frab2 20"
! Sets the value of Bucket Factor T2P Axis 00 FRAB Axis 2 for MAC Flow 02 to 20.00 dB.

Function

Sets/queries the value of Bucket Factor T2P Axis 01 FRAB Axis 0 for MAC Flow 02.

Requirements

Setting

Range: 1 to 32.875 dB

Resolution: 0.125 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:BFACtor:AXIS:T01Frab0 20"
! Sets the value of Bucket Factor T2P Axis 01 FRAB Axis 0 for MAC Flow 02 to 20.00 dB.

Function

Sets/queries the value of Bucket Factor T2P Axis 01 FRAB Axis 1 for MAC Flow 02.

Requirements

Setting

Range: 1 to 32.875 dB

Resolution: 0.125 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:BFACtor:AXIS:T01Frab1 20"
! Sets the value of Bucket Factor T2P Axis 01 FRAB Axis 1 for MAC Flow 02 to 20.00 dB.

Function

Sets/queries the value of Bucket Factor T2P Axis 01 FRAB Axis 2 for MAC Flow 02.

Requirements

Setting

Range: 1 to 32.875 dB

Resolution: 0.125 dB

Query

Range: same as setting

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:RTCMac:MACFlow02:BFACtor:AXIS:T01Frab2 20"
! Sets the value of Bucket Factor T2P Axis 01 FRAB Axis 2 for MAC Flow 02 to 20.00 dB.

Function

Sets/queries the number of T2P Transition Function T2P Axis for MAC Flow 02.

Requirements