CALL:PROTocol

Function

Sets/queries the protocol release that the test set is emulating. PRELease0 indicates protocol release 0 (1xEV-DO), PRA indicates protocol release A (1xEV-DO-A), PRB indicates protocol release B (1xEV-DO-B). See Protocol Rel for details.

The optional [:SELected] mnemonic in this command specifies that the protocol release being set or queried applies to the current system type (see System Type ).

Setting

Range: PRELease0|PRA |PRB

Query

Range: PREL0|PRA |PRB

*RST Setting

Requirements

Test Application Revision: A.06 and above.

Lab Application Revision: A.03 and above.

Test Application Revision: A.09 and above, added release B (1xEV-DO-B).

NOTE: PRA and PRB is only applicable to the feature-licensed test application.

Programming Example

 
OUTPUT 714;"CALL:PROTocol PRA" 
!Selects protocal release A (1xEV-DO-A).

Function

Sets/queries the Access Channel MAC protocol when the test set is configured to protocol release A (1xEV-DO-A) and subtype 2 physical layer. See Access Channel MAC Subtype for details.

To set the protocol release, use CALL[:CELL]:PROTocol[:SELected] . To set the physical layer subtype, use CALL[:CELL]:PROTocol:PLAYer .

Setting

Range: ENHanced|DEFault

Query

Range: ENH|DEF

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:ACMac DEFault"
!Sets the Access Channel MAC protocol to Default protocol.

Function

Sets/queries the physical layer subtype protocol when the test set is configured to protocol release A (1xEV-DO-A). See Release A Physical Layer Subtype for details.

To set the protocol release, use CALL[:CELL]:PROTocol[:SELected] .

Setting

Range: SUBType0|SUBType2

Query

Range: SUBT0|SUBT2

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:PLAYer SUBT0"
!Sets the physical layer protocol to subtype 0.

Function

Sets/queries the physical layer subtype protocol when the test set is configured to protocol release B(1xEV-DO-B). See Release B Physical Layer Subtype for details.

To set the protocol release, use CALL[:CELL]:PROTocol[:SELected] .

Setting

Range: SUBType0|SUBType2|SUBType3

Query

Range: SUBT0|SUBT2|SUBType3

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:PRB:PLAYer SUBT3"
!Sets the physical layer protocol to subtype 3.

Function

Sets/queries the Context Rx for IP Forward Configuration Rule 1. See Forward DTM Context Parms for details.

Setting

Range: NONE|C1RX|C2RX|C3RX|C4RX

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure1:DTMonitor:CONText C2RX"
!Sets the Context Rx for IP Forward Configuration Rule 1 to Context 2 Rx.

Function

Sets/queries the priority for the test set to use when deciding which flow to send to the AT. See MFPA AN Scheduler Priority (0 is lowest) for details.

Setting

Range: 0 - 15

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure1:PRIority 15"
!Sets the AN Scheduler Priority to 15.

Function

Sets/queries the IP Forward Configuration Rule 1 Profile ID for Multi-Flow Packet Application. See MFPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure1:PROFile:IDENtifier `0002'"
!Sets the IP Forward Configuration Rule 1 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Forward Configuration Rule 1. See MFPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure1:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Forward Configuration Rule 1. See MFPA RLP Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure1:RLPFlow FLOW2"
!Sets the RLP FLOW for IP Forward Configuration Rule 1 to FLOW2.

Function

Sets/queries the Context Rx for IP Forward Configuration Rule 2. See Forward DTM Context Parms for details.

Setting

Range: NONE|C1RX|C2RX|C3RX|C4RX

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure2:DTMonitor:CONText C3RX"
!Sets the Context Rx for IP Forward Configuration Rule 2 to Context 3 Rx.

Function

Sets/queries the priority for the test set to use when deciding which flow to send to the AT. See MFPA AN Scheduler Priority (0 is lowest) for details.

Setting

Range: 0 - 15

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure2:PRIority 15"
!Sets the AN Scheduler Priority to 15.

Function

Sets/queries the IP Forward Configuration Rule 2 Profile ID for Multi-Flow Packet Application. See MFPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure2:PROFile:IDENtifier `0002'"
!Sets the IP Forward Configuration Rule 2 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Forward Configuration Rule 2. See MFPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure2:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Forward Configuration Rule 2. See MFPA RLP Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure2:RLPFlow FLOW1"
!Sets the RLP FLOW for IP Forward Configuration Rule 2 to FLOW1.

Function

Sets/queries the Context Rx for IP Forward Configuration Rule 3. See Forward DTM Context Parms for details.

Setting

Range: NONE|C1RX|C2RX|C3RX|C4RX

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure3:DTMonitor:CONText C2RX"
!Sets the Context Rx for IP Forward Configuration Rule 3 to Context 2 Rx.

Function

Sets/queries the priority for the test set to use when deciding which flow to send to the AT. See MFPA AN Scheduler Priority (0 is lowest) for details.

Setting

Range: 0 - 15

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure3:PRIority 15"
!Sets the AN Scheduler Priority to 15.

Function

Sets/queries the IP Forward Configuration Rule 3 Profile ID for Multi-Flow Packet Application. See MFPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure3:PROFile:IDENtifier `0002'"
!Sets the IP Forward Configuration Rule 3 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Forward Configuration Rule 3. See MFPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure3:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Forward Configuration Rule 3. See MFPA RLP Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure3:RLPFlow FLOW1"
!Sets the RLP FLOW for IP Forward Configuration Rule 3 to FLOW1.

Function

Sets/queries the Context Rx for IP Forward Configuration Rule 4. See Forward DTM Context Parms for details.

Setting

Range: NONE|C1RX|C2RX|C3RX|C4RX

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure4:DTMonitor:CONText C2RX"
!Sets the Context Rx for IP Forward Configuration Rule 4 to Context 2 Rx.

Function

Sets/queries the priority for the test set to use when deciding which flow to send to the AT. See MFPA AN Scheduler Priority (0 is lowest) for details.

Setting

Range: 0 - 15

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure4:PRIority 15"
!Sets the AN Scheduler Priority to 15.

Function

Sets/queries the IP Forward Configuration Rule 4 Profile ID for Multi-Flow Packet Application. See MFPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure4:PROFile:IDENtifier `0002'"
!Sets the IP Forward Configuration Rule 4 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Forward Configuration Rule 4. See MFPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure4:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Forward Configuration Rule 4. See MFPA RLP Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure4:RLPFlow FLOW1"
!Sets the RLP FLOW for IP Forward Configuration Rule 4 to FLOW1.

Function

Sets/queries the Context Rx for IP Forward Configuration Rule 5. See Forward DTM Context Parms for details.

Setting

Range: NONE|C1RX|C2RX|C3RX|C4RX

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure5:DTMonitor:CONText C2RX"
!Sets the Context Rx for IP Forward Configuration Rule 5 to Context 2 Rx.

Function

Sets/queries the priority for the test set to use when deciding which flow to send to the AT. See MFPA AN Scheduler Priority (0 is lowest) for details.

Setting

Range: 0 - 15

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure5:PRIority 15"
!Sets the AN Scheduler Priority to 15.

Function

Sets/queries the IP Forward Configuration Rule 5 Profile ID for Multi-Flow Packet Application. See MFPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure5:PROFile:IDENtifier `0002'"
!Sets the IP Forward Configuration Rule 5 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Forward Configuration Rule 5. See MFPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure5:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Forward Configuration Rule 5. See MFPA RLP Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure5:RLPFlow FLOW1"
!Sets the RLP FLOW for IP Forward Configuration Rule 5 to FLOW1.

Function

Sets/queries the Context Rx for IP Forward Configuration Rule 6. See Forward DTM Context Parms for details.

Setting

Range: NONE|C1RX|C2RX|C3RX|C4RX

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure6:DTMonitor:CONText C2RX"
!Sets the Context Rx for IP Forward Configuration Rule 6 to Context 2 Rx.

Function

Sets/queries the priority for the test set to use when deciding which flow to send to the AT. See MFPA AN Scheduler Priority (0 is lowest) for details.

Setting

Range: 0 - 15

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure6:PRIority 15"
!Sets the AN Scheduler Priority to 15.

Function

Sets/queries the IP Forward Configuration Rule 6 Profile ID for Multi-Flow Packet Application. See MFPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure6:PROFile:IDENtifier `0002'"
!Sets the IP Forward Configuration Rule 6 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Forward Configuration Rule 6. See MFPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure6:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Forward Configuration Rule 6. See MFPA RLP Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CONFigure6:RLPFlow FLOW1"
!Sets the RLP FLOW for IP Forward Configuration Rule 6 to FLOW1.

Function

Sets/queries the Context Rx for IP Forward Default Configuration Rule . See Forward DTM Context Parms for details.

Setting

Range: NONE|C1RX|C2RX|C3RX|C4RX

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CDEFault:DTMonitor:CONText C2RX"
!Sets the Context Rx for IP Forward Default Configuration Rule to Context 2 Rx.

Function

Sets/queries the priority for the test set to use when deciding which flow to send to the AT. See MFPA AN Scheduler Priority (0 is lowest) for details.

Setting

Range: 0 - 15

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CDEFault:PRIority 15"
!Sets the AN Scheduler Priority to 15.

Function

Sets/queries the Reservation Idle State for IP Forward Default Configuration Rule. See MFPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CDEFault:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Forward Default Configuration Rule. See MFPA RLP Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:FORWard:FLOW:CDEFault:RLPFlow FLOW1"
!Sets the RLP FLOW for IP Forward Default Configuration Rule to FLOW1.

Function

Sets/queries the IP Reverse Configuration Rule 1 Profile ID for Multi-Flow Packet Application. See MFPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:REVerse:FLOW:CONFigure1:PROFile:IDENtifier `0002'"
!Sets the IP Reverse Configuration Rule 1 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Reverse Configuration Rule 1. See MFPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:REVerse:FLOW:CONFigure1:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Reverse Configuration Rule 1. See MFPA RLP Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:REVerse:FLOW:CONFigure1:RLPFlow FLOW2"
!Sets the RLP FLOW for IP Reverse Configuration Rule 1 to FLOW2.

Function

Sets/queries the IP Reverse Configuration Rule 2 Profile ID for Multi-Flow Packet Application. See MFPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:REVerse:FLOW:CONFigure2:PROFile:IDENtifier `0002'"
!Sets the IP Reverse Configuration Rule 2 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Reverse Configuration Rule 2. See MFPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:REVerse:FLOW:CONFigure2:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Reverse Configuration Rule 2. See MFPA RLP Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:REVerse:FLOW:CONFigure2:RLPFlow FLOW1"
!Sets the RLP FLOW for IP Reverse Configuration Rule 2 to FLOW1.

Function

Sets/queries the IP Reverse Configuration Rule 3 Profile ID for Multi-Flow Packet Application. See MFPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:REVerse:FLOW:CONFigure3:PROFile:IDENtifier `0002'"
!Sets the IP Reverse Configuration Rule 3 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Reverse Configuration Rule 3. See MFPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:REVerse:FLOW:CONFigure3:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Reverse Configuration Rule 3. See MFPA RLP Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:REVerse:FLOW:CONFigure3:RLPFlow FLOW1"
!Sets the RLP FLOW for IP Reverse Configuration Rule 3 to FLOW1.

Function

Sets/queries the IP Reverse Configuration Rule 4 Profile ID for Multi-Flow Packet Application. See MFPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:REVerse:FLOW:CONFigure4:PROFile:IDENtifier `0002'"
!Sets the IP Reverse Configuration Rule 4 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Reverse Configuration Rule 4. See MFPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:REVerse:FLOW:CONFigure4:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Reverse Configuration Rule 4. See MFPA RLP Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:REVerse:FLOW:CONFigure4:RLPFlow FLOW1"
!Sets the RLP FLOW for IP Reverse Configuration Rule 4 to FLOW1.

Function

Sets/queries the IP Reverse Configuration Rule 5 Profile ID for Multi-Flow Packet Application. See MFPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:REVerse:FLOW:CONFigure5:PROFile:IDENtifier `0002'"
!Sets the IP Reverse Configuration Rule 5 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Reverse Configuration Rule 5. See MFPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:REVerse:FLOW:CONFigure5:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Reverse Configuration Rule 5. See MFPA RLP Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:REVerse:FLOW:CONFigure5:RLPFlow FLOW1"
!Sets the RLP FLOW for IP Reverse Configuration Rule 5 to FLOW1.

Function

Sets/queries the IP Reverse Configuration Rule 6 Profile ID for Multi-Flow Packet Application. See MFPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:REVerse:FLOW:CONFigure6:PROFile:IDENtifier `0002'"
!Sets the IP Reverse Configuration Rule 6 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Reverse Configuration Rule 6. See MFPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:REVerse:FLOW:CONFigure6:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Reverse Configuration Rule 6. See MFPA RLP Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:REVerse:FLOW:CONFigure6:RLPFlow FLOW1"
!Sets the RLP FLOW for IP Reverse Configuration Rule 6 to FLOW1.

Function

Sets/queries the Reservation Idle State for IP Reverse Default Configuration Rule. See MFPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:REVerse:FLOW:CDEFault:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Reverse Default Configuration Rule. See MFPA RLP Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:REVerse:FLOW:CDEFault:RLPFlow FLOW1"
!Sets the RLP FLOW for IP Reverse Default Configuration Rule to FLOW1.

Function

Sets/queries the Context Rx for IP Forward Configuration Rule 1. See Forward DTM Context Parms for details.

Setting

Range: NONE|C1RX|C2RX|C3RX|C4RX

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure1:DTMonitor:CONText C2RX"
!Sets the Context Rx for IP Forward Configuration Rule 1 to Context 2 Rx.

Function

Sets/queries the priority for the test set to use when deciding which flow to send to the AT. See EMPA AN Scheduler Priority (0 is lowest) for details.

Setting

Range: 0 - 15

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure1:PRIority 15"
!Sets the AN Scheduler Priority to 15.

Function

Sets/queries the IP Forward Configuration Rule 1 Profile ID for Enhanced Multi-Flow Packet Application. See EMPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure1:PROFile:IDENtifier `0002'"
!Sets the IP Forward Configuration Rule 1 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Forward Configuration Rule 1. See EMPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure1:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Forward Configuration Rule 1. See EMPA Link Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure1:RLPFlow FLOW2"
!Sets the Link Flow for IP Forward Configuration Rule 1 to FLOW2.

Function

Sets/queries the Context Rx for IP Forward Configuration Rule 2. See Forward DTM Context Parms for details.

Setting

Range: NONE|C1RX|C2RX|C3RX|C4RX

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure2:DTMonitor:CONText C2RX"
!Sets the Context Rx for IP Forward Configuration Rule 2 to Context 2 Rx.

Function

Sets/queries the priority for the test set to use when deciding which flow to send to the AT. See EMPA AN Scheduler Priority (0 is lowest) for details.

Setting

Range: 0 - 15

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure2:PRIority 15"
!Sets the AN Scheduler Priority to 15.

Function

Sets/queries the IP Forward Configuration Rule 2 Profile ID for Enhanced Multi-Flow Packet Application. See EMPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure2:PROFile:IDENtifier `0002'"
!Sets the IP Forward Configuration Rule 2 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Forward Configuration Rule 2. See EMPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure2:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Forward Configuration Rule 2. See EMPA Link Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure2:RLPFlow FLOW2"
!Sets the Link Flow for IP Forward Configuration Rule 2 to FLOW2.

Function

Sets/queries the Context Rx for IP Forward Configuration Rule 3. See Forward DTM Context Parms for details.

Setting

Range: NONE|C1RX|C2RX|C3RX|C4RX

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure3:DTMonitor:CONText C2RX"
!Sets the Context Rx for IP Forward Configuration Rule 3 to Context 2 Rx.

Function

Sets/queries the priority for the test set to use when deciding which flow to send to the AT. See EMPA AN Scheduler Priority (0 is lowest) for details.

Setting

Range: 0 - 15

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure3:PRIority 15"
!Sets the AN Scheduler Priority to 15.

Function

Sets/queries the IP Forward Configuration Rule 3 Profile ID for Enhanced Multi-Flow Packet Application. See EMPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure3:PROFile:IDENtifier `0002'"
!Sets the IP Forward Configuration Rule 3 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Forward Configuration Rule 3. See EMPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure3:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Forward Configuration Rule 3. See EMPA Link Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure3:RLPFlow FLOW2"
!Sets the Link Flow for IP Forward Configuration Rule 3 to FLOW2.

Function

Sets/queries the Context Rx for IP Forward Configuration Rule 4. See Forward DTM Context Parms for details.

Setting

Range: NONE|C1RX|C2RX|C3RX|C4RX

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure4:DTMonitor:CONText C2RX"
!Sets the Context Rx for IP Forward Configuration Rule 4 to Context 2 Rx.

Function

Sets/queries the priority for the test set to use when deciding which flow to send to the AT. See EMPA AN Scheduler Priority (0 is lowest) for details.

Setting

Range: 0 - 15

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure4:PRIority 15"
!Sets the AN Scheduler Priority to 15.

Function

Sets/queries the IP Forward Configuration Rule 4 Profile ID for Enhanced Multi-Flow Packet Application. See EMPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure4:PROFile:IDENtifier `0002'"
!Sets the IP Forward Configuration Rule 4 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Forward Configuration Rule 4. See EMPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure4:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Forward Configuration Rule 4. See EMPA Link Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure4:RLPFlow FLOW2"
!Sets the Link Flow for IP Forward Configuration Rule 4 to FLOW2.

Function

Sets/queries the Context Rx for IP Forward Configuration Rule 5. See Forward DTM Context Parms for details.

Setting

Range: NONE|C1RX|C2RX|C3RX|C4RX

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure5:DTMonitor:CONText C2RX"
!Sets the Context Rx for IP Forward Configuration Rule 5 to Context 2 Rx.

Function

Sets/queries the priority for the test set to use when deciding which flow to send to the AT. See EMPA AN Scheduler Priority (0 is lowest) for details.

Setting

Range: 0 - 15

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure5:PRIority 15"
!Sets the AN Scheduler Priority to 15.

Function

Sets/queries the IP Forward Configuration Rule 5 Profile ID for Enhanced Multi-Flow Packet Application. See EMPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure5:PROFile:IDENtifier `0002'"
!Sets the IP Forward Configuration Rule 5 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Forward Configuration Rule 5. See EMPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure5:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Forward Configuration Rule 5. See EMPA Link Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure5:RLPFlow FLOW2"
!Sets the Link Flow for IP Forward Configuration Rule 5 to FLOW2.

Function

Sets/queries the Context Rx for IP Forward Configuration Rule 6. See Forward DTM Context Parms for details.

Setting

Range: NONE|C1RX|C2RX|C3RX|C4RX

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure6:DTMonitor:CONText C2RX"
!Sets the Context Rx for IP Forward Configuration Rule 6 to Context 2 Rx.

Function

Sets/queries the priority for the test set to use when deciding which flow to send to the AT. See EMPA AN Scheduler Priority (0 is lowest) for details.

Setting

Range: 0 - 15

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure6:PRIority 15"
!Sets the AN Scheduler Priority to 15.

Function

Sets/queries the IP Forward Configuration Rule 6 Profile ID for Enhanced Multi-Flow Packet Application. See EMPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure6:PROFile:IDENtifier `0002'"
!Sets the IP Forward Configuration Rule 6 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Forward Configuration Rule 6. See EMPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure6:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Forward Configuration Rule 6. See EMPA Link Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CONFigure6:RLPFlow FLOW2"
!Sets the Link Flow for IP Forward Configuration Rule 6 to FLOW2.

Function

Sets/queries the Context Rx for IP Forward Default Configuration Rule . See Forward DTM Context Parms for details.

Setting

Range: NONE|C1RX|C2RX|C3RX|C4RX

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CDEFault:DTMonitor:CONText C2RX"
!Sets the Context Rx for IP Forward Default Configuration Rule to Context 2 Rx.

Function

Sets/queries the priority for the test set to use when deciding which flow to send to the AT. See EMPA AN Scheduler Priority (0 is lowest) for details.

Setting

Range: 0 - 15

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CDEFault:PRIority 15"
!Sets the AN Scheduler Priority to 15.

Function

Sets/queries the Reservation Idle State for IP Forward Default Configuration Rule. See EMPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CDEFault:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Forward Default Configuration Rule. See EMPA Link Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:FORWard:FLOW:CDEFault:RLPFlow FLOW1"
!Sets the Link Flow for IP Forward Default Configuration Rule to FLOW1.

Function

Sets/queries the IP Reverse Configuration Rule 1 Profile ID for Enhanced Multi-Flow Packet Application. See EMPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:REVerse:FLOW:CONFigure1:PROFile:IDENtifier `0002'"
!Sets the IP Reverse Configuration Rule 1 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Reverse Configuration Rule 1. See EMPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:REVerse:FLOW:CONFigure1:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Reverse Configuration Rule 1. See EMPA Link Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:REVerse:FLOW:CONFigure1:RLPFlow FLOW2"
!Sets the Link Flow for IP Reverse Configuration Rule 1 to FLOW2.

Function

Sets/queries the IP Reverse Configuration Rule 2 Profile ID for Enhanced Multi-Flow Packet Application. See EMPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:REVerse:FLOW:CONFigure2:PROFile:IDENtifier `0002'"
!Sets the IP Reverse Configuration Rule 2 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Reverse Configuration Rule 2. See EMPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:REVerse:FLOW:CONFigure2:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Reverse Configuration Rule 2. See EMPA Link Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:REVerse:FLOW:CONFigure2:RLPFlow FLOW2"
!Sets the Link Flow for IP Reverse Configuration Rule 2 to FLOW2.

Function

Sets/queries the IP Reverse Configuration Rule 3 Profile ID for Enhanced Multi-Flow Packet Application. See EMPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:REVerse:FLOW:CONFigure3:PROFile:IDENtifier `0002'"
!Sets the IP Reverse Configuration Rule 3 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Reverse Configuration Rule 3. See EMPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:REVerse:FLOW:CONFigure3:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Reverse Configuration Rule 3. See EMPA Link Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:REVerse:FLOW:CONFigure3:RLPFlow FLOW2"
!Sets the Link Flow for IP Reverse Configuration Rule 3 to FLOW2.

Function

Sets/queries the IP Reverse Configuration Rule 4 Profile ID for Enhanced Multi-Flow Packet Application. See EMPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:REVerse:FLOW:CONFigure4:PROFile:IDENtifier `0002'"
!Sets the IP Reverse Configuration Rule 4 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Reverse Configuration Rule 4. See EMPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:REVerse:FLOW:CONFigure4:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Reverse Configuration Rule 4. See EMPA Link Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:REVerse:FLOW:CONFigure4:RLPFlow FLOW2"
!Sets the Link Flow for IP Reverse Configuration Rule 4 to FLOW2.

Function

Sets/queries the IP Reverse Configuration Rule 5 Profile ID for Enhanced Multi-Flow Packet Application. See EMPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:REVerse:FLOW:CONFigure5:PROFile:IDENtifier `0002'"
!Sets the IP Reverse Configuration Rule 5 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Reverse Configuration Rule 5. See EMPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:REVerse:FLOW:CONFigure5:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Reverse Configuration Rule 5. See EMPA Link Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:REVerse:FLOW:CONFigure5:RLPFlow FLOW2"
!Sets the Link Flow for IP Reverse Configuration Rule 5 to FLOW2.

Function

Sets/queries the IP Reverse Configuration Rule 6 Profile ID for Enhanced Multi-Flow Packet Application. See EMPA Profile ID for details.

Setting

Range:

• "" (Null)
• "0000" to "FFFF"
• "0000" to "ffff"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:REVerse:FLOW:CONFigure6:PROFile:IDENtifier `0002'"
!Sets the IP Reverse Configuration Rule 6 Profile ID to 0002.

Function

Sets/queries the Reservation Idle State for IP Reverse Configuration Rule 6. See EMPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:REVerse:FLOW:CONFigure6:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Reverse Configuration Rule 6. See EMPA Link Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:REVerse:FLOW:CONFigure6:RLPFlow FLOW2"
!Sets the Link Flow for IP Reverse Configuration Rule 6 to FLOW2.

Function

Sets/queries the Reservation Idle State for IP Reverse Default Configuration Rule. See EMPA Reservation Idle State for details.

Setting

Range: NCHange|CWConnection|FCONnection

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:REVerse:FLOW:CDEFault:REServation CWC"
!Sets the Reservation Idle State to Close with Connection.

Function

Sets/queries the RLP FLow for IP Reverse Default Configuration Rule. See EMPA Link Flow Mapping for details.

Setting

Range: FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:IP:EMFPacket:REVerse:FLOW:CDEFault:RLPFlow FLOW1"
!Sets the Link Flow for IP Reverse Default Configuration Rule to FLOW1.

Function

Sets/queries the Idle State Subtype. See Idle State Subtype

Setting

Range: DEFault|ENHanced

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:ISTate ENHanced"
!Sets the the Idle State Subtype to Subtype 1.

Function

Sets/queries the number of Forward RLP Flows the test set will configure and activate, including the Default Flow (Flow 00).

Setting

Range: 1 - 5

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:FLOW:COUNt 4"
!Sets the number of Forward RLP Flows the test set will configure and activate to 4.

Function

Sets/queries if the AT enables sending NAKs for missing packets on the associated Forward RLP Flow 00. See MFPA NAK Enable for details.

Setting

Range: 1|ON|0|OFF

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow00:NAK:STATe 0"
!Sets the NAK Enable to OFF for RLP FLow 00.

Function

Sets/queries the MFPA Abort Timer for the forward RLP Flow 00.

Setting

Range: 0 - 500 ms

Resolution: 1 ms

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow00:ABORt:TIMer 450ms"
!Sets the abort timer to 450ms.

Function

Sets/queries the MFPA Flush Timer for the forward RLP Flow 00.

Setting

Range: 0 - 500 ms

Resolution: 1 ms

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow00:FLUSh:TIMer 450ms"
!Sets the flush timer to 450ms.

Function

Sets/queries the MFPA Header Size for the forward RLP Flow 00.

Setting

Range: BIT14|BIT22

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow00:HEADer BIT14"
!Sets the Header Size to 14 bits for RLP Flow 00.

Function

Sets/queries the MFPA RLP ID (Binary) for the forward RLP Flow 00.

Setting

Range: "0" to "11111111"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow00:IDENtifier `001'"
!Sets the RLP ID for RLP Flow 00 to 001.

Function

Sets/queries if the AT enables sending NAKs for missing packets on the associated Forward RLP Flow 01. See MFPA NAK Enable for details.

Setting

Range: 1|ON|0|OFF

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow01:NAK:STATe 0"
!Sets the NAK Enable to OFF for RLP FLow 01.

Function

Sets/queries the MFPA Abort Timer for the forward RLP Flow 01.

Setting

Range: 0 - 500 ms

Resolution: 1 ms

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow01:ABORt:TIMer 450ms"
!Sets the abort timer to 450ms.

Function

Sets/queries the MFPA Flush Timer for the forward RLP Flow 01.

Setting

Range: 0 - 500 ms

Resolution: 1 ms

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow01:FLUSh:TIMer 450ms"
!Sets the flush timer to 450ms.

Function

Sets/queries the MFPA Header Size for the forward RLP Flow 01.

Setting

Range: BIT14|BIT22

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow01:HEADer BIT14"
!Sets the Header Size to 14 bits for RLP Flow 01.

Function

Sets/queries the MFPA RLP ID (Binary) for the forward RLP Flow 00.

Setting

Range: "0" to "11111111"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow01:IDENtifier `110001'"
!Sets the RLP ID for RLP Flow 01 to 110001.

Function

Sets/queries if the AT enables sending NAKs for missing packets on the associated Forward RLP Flow 02. See MFPA NAK Enable for details.

Setting

Range: 1|ON|0|OFF

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow02:NAK:STATe 0"
!Sets the NAK Enable to OFF for RLP FLow 02.

Function

Sets/queries the MFPA Abort Timer for the forward RLP Flow 02.

Setting

Range: 0 - 500 ms

Resolution: 1 ms

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow02:ABORt:TIMer 450ms"
!Sets the abort timer to 450ms.

Function

Sets/queries the MFPA Flush Timer for the forward RLP Flow 02.

Setting

Range: 0 - 500 ms

Resolution: 1 ms

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow02:FLUSh:TIMer 450ms"
!Sets the flush timer to 450ms.

Function

Sets/queries the MFPA Header Size for the forward RLP Flow 02.

Setting

Range: BIT14|BIT22

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow02:HEADer BIT14"
!Sets the Header Size to 14 bits for RLP Flow 02.

Function

Sets/queries the MFPA RLP ID (Binary) for the forward RLP Flow 02.

Setting

Range: "0" to "11111111"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow02:IDENtifier `110111'"
!Sets the RLP ID for RLP Flow 02 to 110111.

Function

Sets/queries if the AT enables sending NAKs for missing packets on the associated Forward RLP Flow 03. See MFPA NAK Enable for details.

Setting

Range: 1|ON|0|OFF

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow03:NAK:STATe 0"
!Sets the NAK Enable to OFF for RLP FLow 03.

Function

Sets/queries the MFPA Abort Timer for the forward RLP Flow 03.

Setting

Range: 0 - 500 ms

Resolution: 1 ms

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow03:ABORt:TIMer 450ms"
!Sets the abort timer to 450ms.

Function

Sets/queries the MFPA Flush Timer for the forward RLP Flow 03.

Setting

Range: 0 - 500 ms

Resolution: 1 ms

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow03:FLUSh:TIMer 450ms"
!Sets the flush timer to 450ms.

Function

Sets/queries the MFPA Header Size for the forward RLP Flow 03.

Setting

Range: BIT14|BIT22

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow03:HEADer BIT14"
!Sets the Header Size to 14 bits for RLP Flow 03.

Function

Sets/queries the MFPA RLP ID (Binary) for the forward RLP Flow 03.

Setting

Range: "0" to "11111111"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow03:IDENtifier `11'"
!Sets the RLP ID for RLP Flow 03 to 11.

Function

Sets/queries if the AT enables sending NAKs for missing packets on the associated Forward RLP Flow 04. See MFPA NAK Enable for details.

Setting

Range: 1|ON|0|OFF

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow04:NAK:STATe 0"
!Sets the NAK Enable to OFF for RLP FLow 04.

Function

Sets/queries the MFPA Abort Timer for the forward RLP Flow 04.

Setting

Range: 0 - 500 ms

Resolution: 1 ms

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow04:ABORt:TIMer 450ms"
!Sets the abort timer to 450ms.

Function

Sets/queries the MFPA Flush Timer for the forward RLP Flow 04.

Setting

Range: 0 - 500 ms

Resolution: 1 ms

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow04:FLUSh:TIMer 450ms"
!Sets the flush timer to 450ms.

Function

Sets/queries the MFPA Header Size for the forward RLP Flow 04.

Setting

Range: BIT14|BIT22

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow04:HEADer BIT14"
!Sets the Header Size to 14 bits for RLP Flow 04.

Function

Sets/queries the MFPA RLP ID (Binary) for the forward RLP Flow 04.

Setting

Range: "0" to "11111111"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:FORWard:RLPFlow04:IDENtifier `110000'"
!Sets the RLP ID for RLP Flow 04 to 110000.

Function

Sets/queries the number of Reverse RLP Flows the test set will configure and activate, including the Default Flow (Flow 00).

Setting

Range: 1 - 5

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:REVerse:FLOW:COUNt 4"
!Sets the number of Reverse RLP Flows the test set will configure and activate to 4.

Function

Sets/queries the MFPA Abort Timer for the reverse RLP Flow 00.

Setting

Range: 0 - 500 ms

Resolution: 1 ms

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:REVerse:RLPFlow00:ABORt:TIMer 450ms"
!Sets the abort timer to 450ms.

Function

Sets/queries the Data Over Signaling Allowed state on the associated reverse RLP Flow 00. See MFPA Data Over Signaling Allowed for details.

Setting

Range: 1|ON|0|OFF

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:REVerse:RLPFlow00:DOSignaling:STATe 0"
!Sets the Data Over Signaling Allowed to OFF for RLP FLow 00.

Function

Sets/queries the Context Tx for RLP Reverse Flow 00. See Reverse DTM Context Parms for details.

Setting

Range: NONE|C1TX|C2TX|C3TX|C4TX

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:REVerse:RLPFlow00:DTMonitor:CONText C1TX"
!Sets the Context Tx for RLP Reverse FLow 00 to Context 1 Rx.

Function

Sets/queries the MFPA Flush Timer for the reverse RLP Flow 00.

Setting

Range: 0 - 500 ms

Resolution: 1 ms

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:REVerse:RLPFlow00:FLUSh:TIMer 450ms"
!Sets the flush timer to 450ms.

Function

Sets/queries the MFPA Header Size for the reverse RLP Flow 00.

Setting

Range: BIT14|BIT22

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:REVerse:RLPFlow00:HEADer BIT14"
!Sets the Header Size to 14 bits for RLP Flow 00.

Function

Sets/queries the MFPA RLP ID (Binary) for the reverse RLP Flow 00.

Setting

Range: "0" to "11111111"

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:REVerse:RLPFlow00:IDENtifier `001'"
!Sets the RLP ID for RLP Flow 00 to 001.

Function

Sets/queries the RTCMAC Flow that the RLP reverse FLow 00 map. See MFPA RTC MAC Flow Mapping for details.

Setting

Range: FLOW1|FLOW2|FLOW3|FLOW4

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:REVerse:RLPFlow00:MAPPing:MACFlow FLOW2"
!Sets the RTCMAC FLow that the RLP Reverse Flow 00 map to FLOW2.

Function

Sets/queries if the AN enables sending NAKs for missing packets on the associated reverse RLP Flow 00. See MFPA NAK Enable for details.

Setting

Range: 1|ON|0|OFF

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:REVerse:RLPFlow00:NAK:STATe 0"
!Sets the NAK Enable to OFF for RLP FLow 00.

Function

Sets/queries if the AT is enabled to react to NAKs and resend on the associated reverse RLP Flow Flow 00 if the packet has not already been resent by the RLP layer. See MFPA Physical Layer NAK Enable for details.

Setting

Range: 1|ON|0|OFF

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:REVerse:RLPFlow00:NAKPhysical:STATe 0"
!Sets the Physical Layer NAK Enable to OFF for RLP FLow 00.

Function

Sets/queries the MFPA Abort Timer for the reverse RLP Flow 01.

Setting

Range: 0 - 500 ms

Resolution: 1 ms

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:REVerse:RLPFlow01:ABORt:TIMer 450ms"
!Sets the abort timer to 450ms.

Function

Sets/queries the Data Over Signaling Allowed state on the associated reverse RLP Flow 01. See MFPA Data Over Signaling Allowed for details.

Setting

Range: 1|ON|0|OFF

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:REVerse:RLPFlow01:DOSignaling:STATe 0"
!Sets the Data Over Signaling Allowed to OFF for RLP FLow 01.

Function

Sets/queries the Context Tx for RLP Reverse Flow 01. See Reverse DTM Context Parms for details.

Setting

Range: NONE|C1TX|C2TX|C3TX|C4TX

Query

Same as setting

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:PROTocol:RLP:REVerse:RLPFlow01:DTMonitor:CONText C2TX"
!Sets the Context Tx for RLP Reverse FLow 01 to Context 2 Rx.

Function

Sets/queries the MFPA Flush Timer for the reverse RLP Flow 01.

Setting

Range: 0 - 500 ms

Resolution: 1 ms