CALL:STATus

Function

Queries the current reverse data channel packet size which indirectly determines the data rate and modulation type. See R-Data Pkt Size .

Requirements

Query

Range: BIT128|BIT256|BIT512|BIT768|BIT1024|BIT1536|BIT2048|BIT3072
|BIT4096|BIT6144|BIT8192|BIT12288

*RST Setting

BIT512

Programming Example

 
OUTPUT 714;"CALL:STATus:APPLication:DATA[:REVerse]:PACKet?"
! Quries the current R-Data packet size.

Function

Queries the expected transmission mode used by R-Data channel. See Reverse Data Transmission Mode .

Requirements

Query

Range: HCAP|LLAT
HCAP (High Capacity); LLAT (Low Latency)

*RST Setting

HCAP

Programming Example

 
OUTPUT 714;"CALL:STATus:APPLication:DATA:TRANsmission?"
! Queries the expected R-Data transmission mode.

Function

Queries the expected enhanced access rate. See Enhanced Access Rate .

Requirements

Query

Range: BPS9600|BPS19200|BPS38400|UNKN

*RST Setting

BPS9600

Programming Example

 
OUTPUT 714;"CALL:STATus:APPLication:EACCess:DRATe:EXPected?"
! Queries the expected enhanced access rate.

Function

Queries the current power level of the additive white Gaussian noise (AWGN) source for the specified system type.

The optional [:SELected] keyword in this command specifies that the AWGN power level being set or queried applies to the current system type (see System Type ).

See Cell Power, AWGN (Additive White Gaussian Noise) Power and Total RF Power for more information about desired versus current power levels.

Requirements

Query

Range:

• -170 dBm/1.23 MHz to +35 dBm/1.23 MHz (This is the range of possible query returns, see Cell Power, AWGN (Additive White Gaussian Noise) Power and Total RF Power for the actual hardware range of the source)
• NAN (Returned if CALL:STATus:AWGNoise[:INTernal]:POWer:STATe<[:SELected]|:DIGital856>? is OFF)

Resolution: 0.01 dB

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:AWGN:POWer:AMPLitude?" 
! Queries the current AWGN power

Function

Queries the current on/off state of the additive white Gaussian noise (AWGN) source for the specified system type.

The optional [:SELected] keyword in this command specifies that the AWGN power level being set or queried applies to the current system type (see System Type ).

See Cell Power, AWGN (Additive White Gaussian Noise) Power and Total RF Power for more information about desired versus current power levels.

Requirements

Query

Range: 1|0

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:AWGNoise:POWer:STATe?"
! Queries the current on/off state of the AWGN source

Function

Queries the current Small Slot Cycle Allowed value that is negotiated during the current session.

The current Small Slot Cycle Allowed value will be updated to the value negotiated during the session negotiation whenever a session negotiation or re-negotiation is performed. See Small Slot Cycle Allowed

Requirements

Query

Range: 1|0

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:CCHannel:ISTate:ASSCycle?" 
! Queries the current Small Slot Cycle Allowed value.

Function

Queries the Preferred Control Channel Cycle currently configured for the session. See Preferred Control Channel Cycle .

Requirements

Query

Range: 0 to 32767

Resolution: 1 cycle

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:CCHannel:PCCCycle:NUMBer?" 
! Queries the current Preferred Control Channel Cycle.

Function

Queries the Preferred Control Channel Cycle enable state. See Preferred Control Channel Cycle .

Requirements

Query

Range: 1|0

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:CCHannel:PCCCycle:STATe?"
! Queries the current Preferred Control Channel Cycle enable state.

Function

Queries the current Slot Cycle 1 that was negotiated during the current session.

The current Slot Cycle 1 will be updated to the value negotiated during the session negotiation whenever a session negotiation or re-negotiation is performed. See Slotted Mode .

Requirements

Query

Range: SLOT64 | SLOT128 | SLOT256 |SLOT768 | SLOT1536 | SLOT3072 | SLOT6144 | SLOT12288

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:CCHannel:SCYCle1?" 
! Queries the current Slot Cycle 1.

Function

Queries the current Slot Cycle 2 that was negotiated during the current session.

The current Slot Cycle 2 will be updated to the value negotiated during the session negotiation whenever a session negotiation or re-negotiation is performed. See Slotted Mode .

Requirements

Query

Range: SLOT64 | SLOT128 | SLOT256 |SLOT768 | SLOT1536 | SLOT3072 | SLOT6144 | SLOT12288

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:CCHannel:SCYCle2?" 
! Queries the current Slot Cycle 2.

Function

Queries the current Slot Cycle 3that was negotiated during the current session.

The current Slot Cycle 3 will be updated to the value negotiated during the session negotiation whenever a session negotiation or re-negotiation is performed. See Slotted Mode .

Requirements

Query

Range: SLOT64 | SLOT128 | SLOT256 |SLOT768 | SLOT1536 | SLOT3072 | SLOT6144 | SLOT12288

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:CCHannel:SCYCle3?" 
! Queries the current Slot Cycle 3.

Function

Queries the current WakeCount 1 that was negotiated during the current session.

The current WakeCount 1 will be updated to the value negotiated during the session negotiation whenever a session negotiation or re-negotiation is performed. See Slotted Mode .

Requirements

Query

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:CCHannel:WCOunt1?" 
! Queries the current WakeCount 1.

Function

Queries the current WakeCount 2 that was negotiated during the current session.

The current WakeCount 2 will be updated to the value negotiated during the session negotiation whenever a session negotiation or re-negotiation is performed. See Slotted Mode .

Requirements

Query

Range: 0 to 15Resolution: integer

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:CCHannel:WCOunt2?" 
! Queries the current WakeCount 2.

Function

Queries which system type the test set is currently emulating (see System Type ).

Requirements

Query

Range: CW|DIG856

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:CELL:SYSTem?"
! Queries the current system type.

Function

Queries the current cell (1) power level for the specified system type.

The optional [:SELected] keyword in this command specifies that the cell power level being set or queried applies to the current system type (see System Type ).

See Cell Power, AWGN (Additive White Gaussian Noise) Power and Total RF Power for more information about desired versus current power levels.

Requirements

Query

Range:

• -170 dBm/1.23 MHz to +37 dBm/1.23 MHz (This is the range of possible query returns, see Cell Power, AWGN (Additive White Gaussian Noise) Power and Total RF Power for the actual hardware range of the source)
• NAN (Returned if CALL:STATus:CELL[1]:POWer:STATe<[:SELected]|:DIGital856>? is OFF)

Resolution: 0.01 dB

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:CELL:POWer?"
! Queries the current cell power level

Function

Queries the current on/off state of cell (1) power for the specified system type.

The optional [:SELected] keyword in this command specifies that the cell power level being set or queried applies to the current system type (see System Type ).

See Cell Power, AWGN (Additive White Gaussian Noise) Power and Total RF Power for more information about desired versus current power levels.

Requirements

Query

Range: 1|0

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:CELL:POWer:STATe?"
! Queries the current on/off state of cell power

Function

Queries the date of the CDMA local time. The CDMA local time is a calculated value, see CDMA System Time for details.

To query the time of the day of the CDMA local time, see CALL:STATus:CSTime:LOCal:TIME? .

Query

Range: from January 6, 1980 to January 5, 2096. It is returned in three comma-separated values, in the order of <year>, <month> and <date> where

• <year> 1980 to 2096
• <month> 1 to 12 (the number 1 corresponds to January)
• <day> 1 to the number of days in the month specified by the <month> parameter

or -1,-1,-1 is returned when the test set is not in Active Cell or IS-856 Test Mode operating mode.

Requirement

Test Application Revision: A.05 and above
Lab Application Revision: A.02 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:CSTime:LOCal:DATE?"
!Queries the date of CDMA local time.

Function

Queries the time of the day of the CDMA local time. The CDMA local time is a calculated value, see CDMA System Time for details.

To query the date of the CDMA local time, see CALL:STATus:CSTime:LOCal:DATE? .

Query

Range: any time of a day. It is returned in three comma-separated values, in the order of <hour>,<minute>,<second> where

• <hour> 0 to 23
• <minute> 0 to 59
• <second> 0 to 59

or -1,-1,-1 is returned when the test set is not in Active Cell or IS-856 Test Mode operating mode.

Requirement

Test Application Revision: A.05 and above
Lab Application Revision: A.02 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:CSTime:LOCal:TIME?"
!Queries the time of the day of the CDMA local time.

Function

Queries the GPSOne Time Offset in the US Cellular band. See User Calibration Summary .

Query

Range: -900.000 ns to 900.000 ns
Resolution: 0.001

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:GPSTime:OFFSet:USCellular?"

Function

Queries the GPSOne Time Offset in the US PCS band. See User Calibration Summary .

Query

Range: -900.000 ns to 900.000 ns
Resolution: 0.001

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:GPSTime:OFFSet:USPCs?"

Function

Queries the status of the data connection. See Summary of Data Connection Processing States Description and Instrument Status Area .

Use the CALL:STATus:DATA? query after a handoff to verify the data connection state is still connected. See Handoff and Data Connection State Synchronization .

Query

Range:

CCL ( Connection Closing State )

CNEG ( Connection Negotiate State )

CREQ ( Connection Request State )

DCON ( Connected State )

DORM ( Dormant State ) ( Lab Application Only )

HAND ( Handoff )

IDLE ( Idle State )

PAG ( Paging State )

SCL ( Session Closing State )

SNEG ( Session Negotiate State )

SOP ( Session Open State )

UREQ ( UATI Request State )

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:DATA?"
!Queries the status of the data connection.

Function

Queries the Channel Connection Status of the Aux unit 1 in the <Operating Mode> Status area when in multi-carrier multi-unit connection. See Multi-carrier Multi-unit (MCMU)

Requirements

Query

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:MCARrier:AUXiliary:DATA?"
! Queries the Multi-carrier Auxiliary 1 Channel Connection State.

Function

Queries the Channel Connection Status of the Aux unit 2 in the Instrument Status Area area when in multi-carrier multi-unit connection. See Multi-carrier Multi-unit (MCMU)

Requirements

Query

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:MCARrier:AUXiliary2:DATA?"
! Queries the Multi-carrier Auxiliary 2 Channel Connection State.

Function

Queries the number of multi-carrier connected carriers, which indicates the numbers of traffic channel present. See Connected Carriers .

Requirements

Query

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:MCARrier:CNUMber:CONNected?"
! Queries the .number of multi-carrier connected carriers

Function

Queries the Channel Connection Status of the Main unit in the Instrument Status Area area when in multi-carrier multi-unit connection. See Multi-carrier Multi-unit (MCMU)

Requirements

Query

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:MCARrier:SELF:DATA?"
! Queries the multi-carrier Main Channel Connection State

Function

Queries the local channel state (fixed to On) in multi-carrier configuration when the Local Testset Configuration is Main or Single. See Fixed Settings .

Requirements

Query

Range: 1 | 0

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:MCARrier:SELF:CARRier:STATe?"
! Queries the local channel state.

Function

Queries the expected power from AT which is computed using the post-transition levels of R-RRI and R-Data channels. It is applicable for subtype 2 physical layer. See Expected Power for Subtype 0, Subtype 2 and Subtype 3 Physical Layer for details.

Requirements

Query

Range: -69 to +30 dBm, 9.91E+37 (NAN)

Resolution: 0.01 dB

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:AUTO:POWer:POST?"
! Queries the expected terminal power [post] value.

Function

Requirements

Query

Range: -69 to +30 dBm, 9.91E+37 (NAN)

Resolution: 0.01 dB

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:AUTO:POWer:POST:TOTal?"
! Queries the expected power value of the total minimum Open Loop Power for each reverse carrier 
! expected from the AT.

Function

Queries the AT supported maximum packet size.

Requirements

Query

Range: BIT1024 | BIT2048|BIT4096|BIT8192|BIT12288

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:DATA:PACKet:MAXimum?"
! Queries the AT supported Max Packet Size

Function

Queries the AT supported Max Forward Link Bandwidth No Jammer. See Max Forward Link Bandwidth No Jammer .

Requirements

Query

Range: 0.0 to 163.8375

Resolution: 0.0025

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:FLINk:BANDwidth:NJAMmer:MAXimum?"
! Queries the AT supported Max Forward Link Bandwidth No Jammer

Function

Queries the AT supported Max Forward Link Bandwidth with Jammer. See Max Forward Link Bandwidth Jammer .

Requirements

Query

Range: 0.0 to 163.8375

Resolution: 0.0025

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:FLINk:BANDwidth:WJAMmer:MAXimum?"
! Queries the AT supported Max Forward Link Bandwidth with Jammer

Function

Queries the AT supported Max Number of Forward Link. See Max Number Forward Link Supported .

Requirements

Query

Range: 1 to 16

Resolution: integer

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:FLINk:SUPPorted:MAXimum?"
! Queries the AT supported Max Number of Forwaed Link

Function

Queries whether the AT support Forward Feedback Multiplexing. See Forward Feedback Multiplexing .

Requirements

Query

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:FORWard:FMULtiplex:SUPPorted?"
! Queries whether the AT supported Forward Feedback Multiplexing.

*RST Setting

Lab Application Revision: C.00.08 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:IP:ADDRess:IP4?" 
! Queries the DUT IPv4 address.

Range: "" (Null) or 19 characters of standard IPv6 address formatted as: AAAA.BBBB.CCCC.DDDD, where A, B, C, and D are all hex numbers between 0 and F.

*RST Setting

Lab Application Revision: C.00.08 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:IP:ADDRess:IP6:IID?" 
! Queries the DUT IPv6 IID.

Function

Queries the MAC Index assigned to the AT under test by the test set. See MAC Index .

Requirements

Query

Range: 5 to 63, 9.91E+37 (NAN)

Resolution: integer

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:MACIndex?"
! Queries the MAC Index.

Function

Queries the AT supported packet formats: Max Optional Data Rate. See Max Optional Data Rate .

Requirements

Query

Range: BPS0|BPS1228800|BPS3686400|BPS4300800|BPS4915200

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:PACKet:FORMat:DRATe:MAXimum?"
! Queries the AT supported packet formats: max optional data rate

Function

Queries the AT supported packet formats: Max Optional Payload Size. See Max Optional Payload Size .

Requirements

Query

Range: BIT5120|BIT6144|BIT7168|BIT8192

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:PACKet:FORMat:PSIZe:MAXimum?"
! Queries the AT supported packet formats: max optional packet size

Function

Queries the AT supported packet formats: Short Packets Enabled. See Short Packets Enabled .

Requirements

Query

Range: BIT1024 | BIT2048 | BIT3072 | BIT4096|BIT5120|BIT6144|BIT7168|BIT8192

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:PACKet:FORMat:SPACket:THReshold?"
! Queries the AT supported packet formats: Short Packets Enabled

Function

Queries the reported AT Max Transmit Power with the unit of Watt.

Requirements

Query

Range: 0.020, 0.025 to 6.375 in 0.025 increments

*RST Setting

0.020

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:POWer:MAXimum?"
! Queries the AT reported AT Max Transmit Power

Function

Queries the Max Reverse Link Bandwidth. See Max Reverse Link Bandwidth .

Requirements

Query

Range: 0.0 to 163.8375

Resolution: 0.0025

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:RLINk:BANDwidth:MAXimum?"
! Queries the AT supported Max Reverse Link Bandwidth

Function

Queries the AT supported Max Number of Reverse Link. See Max Number Reverse Link Supported .

Requirements

Query

Range: 1 to 16

Resolution: integer

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:RLINk:SUPPorted:MAXimum?"
! Queries the AT supported Max Number of Reverse Link

Function

Queries the AT supported Max Number of Sub-Active sets. See Max Sub-Active Sets .

Requirements

Query

Range: +1 to +16

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:SASets:MAXimum?"
! Queries the AT supported Max Number of Sub-Active sets

Function

Queries the current TxT2P Pre-Transition gain being used for the current configuration of data packet size and transmission mode. See TxT2P Gain Settings for details.

Requirements

Query

Range: 0 to 32 dB
Resolution: 0.25 dB

*RST Setting

7 dB

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:T2Pilot:GAIN:PRE?"
! Queries the current TxT2P Pre-Transition gain.

Function

Queries the current TxT2P Post-Transition gain being used for the current configuration of data packet size and transmission mode. See TxT2P Gain Settings for details.

Requirements

Query

Range: 0 to 32 dB
Resolution: 0.25 dB

*RST Setting

7 dB

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:T2Pilot:GAIN:POST?"
! Queries the current TxT2P Post-Transition gain.

Function

Queries the current T2P Transition value being used for the current configuration of data packet size and transmission mode. See T2P Transition Settings for details.

Requirements

Query

Range: 0 to 3 (subpackets)
Resolution: 1

*RST Setting

3

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:T2Pilot:TRANsition?"
! Queries the current T2P Transition value.

Function

Queries the Rate1M8Supported attribute value that will be negotiated during session negotiation (if a session is not open) or has been configured for the session (if a session is open). See Rate 1M8 Supported Control for details.

Query

Range: YES|NO

*RST Setting

Requirements

Test Application Revision: A.06 and above, with the required feature license.
Lab Application Revision: A.03 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:TRAFfic:DRATe:KBPS1843"
!Queries Rate1M8Supported attribute value.

Function

Queries the UATI 024. See UATI 024 .

Requirements

Query

Range: 0 to 16777215, NAN

Resolution: integer

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:UATI024?"
! Queries the UATI 024.

Function

Queries the UATI Color Code. See UATI Color Code .

Requirements

Query

Range: 0 to 255, NAN

Resolution: integer

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:STATus:MS:UCCode?"
! Queries the UATI Color Code.

Function

Queries the current measurement speed being used by the channel power measurement. This speed may differ from the setting specified by the SETup:CPOWer:MSPeed command. See Measurement Speed .

Query

Range: FAST|VFAS

*RST Setting

Requirements

Test Application Revision: A.02.20 and above
Lab Application Revision: A.01 and above

Programming Example

 
OUTPUT 714;"CALL:STATus:MSPeed?"
!Queries the channel power measurement speed.

Function

Queries the current Access Channel MAC protocol being configured in the test set. See Determination of Current Access Channel MAC Subtype for details.

Query

Range: ENH|DEF

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:ACMac?"
!Queries the current Access Channel MAC protocol.

Function

Queries the maximum number of forward IP flows to be open at a time. This value is negotiated during the session negotiation for MaxReservations: MaxNumOpenReservationsFwd.

Query

Range:

• 0 to 255
• NAN

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:FLOW:MAXimum?"
!Queries the maximum number of forward IP flows to be open at a time.

Function

Queries the Reservation Label KK for the forward IP Flow 00. See IP KK for details.

Query

Range:

• "" (null string)
• "0x00" to "0xFE"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow00:REServation:LABel?"
!Queries the current Reservation Label KK.

Function

Queries the current state of the forward IP Flow 00. See State for details.

Query

Range: UNKN|OPEN|CLOS

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow00:STATe?"
!Queries the current state of IP Flow 00.

Function

Queries the Profile ID of the forward IP Flow 00. See MFPA Profile ID for details.

Query

Range:

• "" (null string)
• "0x0000" to "0xFFFF"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow00:PROFile:IDENtifier?"
!Queries the current profile ID of IP Flow 00.

Function

Queries the priority of the forward IP Flow 00. See Priority for details.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow00:PRIority?"
!Queries the priority of IP Flow 00.

Function

Queries the EMPA AN Scheduler Priority (0 is lowest) of the forward IP Flow 00.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow00:PRIority:ANSCheduler?"
!Queries the priority of IP Flow 00.

Function

Queries which RLP Flow that the forward IP Flow 00 mapped.

Query

Range: NMAP|DEF|FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow00:RLPFlow:MAPPed?"
!Queries the RLP Flow that the IP Flow 00 mapped.

Function

Queries the number of packet filter for the forward IP Flow 00. See Packet Filters for details.

Query

Range:

• 0 to 16
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow00:PFILter:COUNt?"
!Queries the number of packet filter for IP Flow 00.

Function

Queries the current IP Configuration Rule for the forward IP Flow 00.

Query

Range: NMAP|DEF|RULE1|RULE2|RULE3|RULE4|RULE5|RULE6

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow00:MAPPing:RULE?"
!Queries the current IP configuration rule for IP Flow 00.

Function

Queries the Reservation Label KK for the forward IP Flow 01. See IP KK for details.

Query

Range:

• "" (null string)
• "0x00" to "0xFE"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow01:REServation:LABel?"
!Queries the current Reservation Label KK.

Function

Queries the current state of the forward IP Flow 01. See State for details.

Query

Range: UNKN|OPEN|CLOS

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow01:STATe?"
!Queries the current state of IP Flow 01.

Function

Queries the Profile ID of the forward IP Flow 01. See MFPA Profile ID for details.

Query

Range:

• "" (null string)
• "0x0000" to "0xFFFF"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow01:PROFile:IDENtifier?"
!Queries the current profile ID of IP Flow 01.

Function

Queries the priority of the forward IP Flow 01. See Priority for details.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow01:PRIority?"
!Queries the priority of IP Flow 01.

Function

Queries the EMPA AN Scheduler Priority (0 is lowest) of the forward IP Flow 01.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow01:PRIority:ANSCheduler?"
!Queries the priority of IP Flow 01.

Function

Queries which RLP Flow that the forward IP Flow 01 mapped.

Query

Range: NMAP|DEF|FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow01:RLPFlow:MAPPed?"
!Queries the RLP Flow that the IP Flow 01 mapped.

Function

Queries the number of packet filter for the forward IP Flow 01. See Packet Filters for details.

Query

Range:

• 0 to 16
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow01:PFILter:COUNt?"
!Queries the number of packet filter for IP Flow 01.

Function

Queries the current IP Configuration Rule for the forward IP Flow 01.

Query

Range: NMAP|DEF|RULE1|RULE2|RULE3|RULE4|RULE5|RULE6

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow01:MAPPing:RULE?"
!Queries the current IP configuration rule for IP Flow 01.

Function

Queries the Reservation Label KK for the forward IP Flow 02. See IP KK for details.

Query

Range:

• "" (null string)
• "0x00" to "0xFE"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow02:REServation:LABel?"
!Queries the current Reservation Label KK.

Function

Queries the current state of the forward IP Flow 02. See State for details.

Query

Range: UNKN|OPEN|CLOS

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow02:STATe?"
!Queries the current state of IP Flow 02.

Function

Queries the Profile ID of the forward IP Flow 02. See MFPA Profile ID for details.

Query

Range:

• "" (null string)
• "0x0000" to "0xFFFF"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow02:PROFile:IDENtifier?"
!Queries the current profile ID of IP Flow 02.

Function

Queries the priority of the forward IP Flow 02. See Priority for details.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow02:PRIority?"
!Queries the priority of IP Flow 02.

Function

Queries the EMPA AN Scheduler Priority (0 is lowest) of the forward IP Flow 02.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow02:PRIority:ANSCheduler?"
!Queries the priority of IP Flow 02.

Function

Queries which RLP Flow that the forward IP Flow 02 mapped.

Query

Range: NMAP|DEF|FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow02:RLPFlow:MAPPed?"
!Queries the RLP Flow that the IP Flow 02 mapped.

Function

Queries the number of packet filter for the forward IP Flow 02. See Packet Filters for details.

Query

Range:

• 0 to 16
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow02:PFILter:COUNt?"
!Queries the number of packet filter for IP Flow 02.

Function

Queries the current IP Configuration Rule for the forward IP Flow 02.

Query

Range: NMAP|DEF|RULE1|RULE2|RULE3|RULE4|RULE5|RULE6

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow02:MAPPing:RULE?"
!Queries the current IP configuration rule for IP Flow 02.

Function

Queries the Reservation Label KK for the forward IP Flow 03. See IP KK for details.

Query

Range:

• "" (null string)
• "0x00" to "0xFE"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow03:REServation:LABel?"
!Queries the current Reservation Label KK.

Function

Queries the current state of the forward IP Flow 03. See State for details.

Query

Range: UNKN|OPEN|CLOS

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow03:STATe?"
!Queries the current state of IP Flow 03.

Function

Queries the Profile ID of the forward IP Flow 03. See MFPA Profile ID for details.

Query

Range:

• "" (null string)
• "0x0000" to "0xFFFF"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow03:PROFile:IDENtifier?"
!Queries the current profile ID of IP Flow 03.

Function

Queries the priority of the forward IP Flow 03. See Priority for details.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow03:PRIority?"
!Queries the priority of IP Flow 03.

Function

Queries the EMPA AN Scheduler Priority (0 is lowest) of the forward IP Flow 03.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow03:PRIority:ANSCheduler?"
!Queries the priority of IP Flow 03.

Function

Queries which RLP Flow that the forward IP Flow 03 mapped.

Query

Range: NMAP|DEF|FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow03:RLPFlow:MAPPed?"
!Queries the RLP Flow that the IP Flow 03 mapped.

Function

Queries the number of packet filter for the forward IP Flow 03. See Packet Filters for details.

Query

Range:

• 0 to 16
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow03:PFILter:COUNt?"
!Queries the number of packet filter for IP Flow 03.

Function

Queries the current IP Configuration Rule for the forward IP Flow 03.

Query

Range: NMAP|DEF|RULE1|RULE2|RULE3|RULE4|RULE5|RULE6

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow03:MAPPing:RULE?"
!Queries the current IP configuration rule for IP Flow 03.

Function

Queries the Reservation Label KK for the forward IP Flow 04. See IP KK for details.

Query

Range:

• "" (null string)
• "0x00" to "0xFE"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow04:REServation:LABel?"
!Queries the current Reservation Label KK.

Function

Queries the current state of the forward IP Flow 04. See State for details.

Query

Range: UNKN|OPEN|CLOS

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow04:STATe?"
!Queries the current state of IP Flow 04.

Function

Queries the Profile ID of the forward IP Flow 04. See MFPA Profile ID for details.

Query

Range:

• "" (null string)
• "0x0000" to "0xFFFF"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow04:PROFile:IDENtifier?"
!Queries the current profile ID of IP Flow 04.

Function

Queries the priority of the forward IP Flow 04. See Priority for details.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow04:PRIority?"
!Queries the priority of IP Flow 04.

Function

Queries the EMPA AN Scheduler Priority (0 is lowest) of the forward IP Flow 04.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow04:PRIority:ANSCheduler?"
!Queries the priority of IP Flow 04.

Function

Queries which RLP Flow that the forward IP Flow 04 mapped.

Query

Range: NMAP|DEF|FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow04:RLPFlow:MAPPed?"
!Queries the RLP Flow that the IP Flow 04 mapped.

Function

Queries the number of packet filter for the forward IP Flow 04. See Packet Filters for details.

Query

Range:

• 0 to 16
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow04:PFILter:COUNt?"
!Queries the number of packet filter for IP Flow 04.

Function

Queries the current IP Configuration Rule for the forward IP Flow 04.

Query

Range: NMAP|DEF|RULE1|RULE2|RULE3|RULE4|RULE5|RULE6

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow04:MAPPing:RULE?"
!Queries the current IP configuration rule for IP Flow 04.

Function

Queries the Reservation Label KK for the forward IP Flow 05. See IP KK for details.

Query

Range:

• "" (null string)
• "0x00" to "0xFE"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow05:REServation:LABel?"
!Queries the current Reservation Label KK.

Function

Queries the current state of the forward IP Flow 05. See State for details.

Query

Range: UNKN|OPEN|CLOS

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow05:STATe?"
!Queries the current state of IP Flow 05.

Function

Queries the Profile ID of the forward IP Flow 05. See MFPA Profile ID for details.

Query

Range:

• "" (null string)
• "0x0000" to "0xFFFF"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow05:PROFile:IDENtifier?"
!Queries the current profile ID of IP Flow 05.

Function

Queries the priority of the forward IP Flow 05. See Priority for details.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow05:PRIority?"
!Queries the priority of IP Flow 05.

Function

Queries the EMPA AN Scheduler Priority (0 is lowest) of the forward IP Flow 05

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow05:PRIority:ANSCheduler?"
!Queries the priority of IP Flow 05.

Function

Queries which RLP Flow that the forward IP Flow 05 mapped.

Query

Range: NMAP|DEF|FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow05:RLPFlow:MAPPed?"
!Queries the RLP Flow that the IP Flow 05 mapped.

Function

Queries the number of packet filter for the forward IP Flow 05. See Packet Filters for details.

Query

Range:

• 0 to 16
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow05:PFILter:COUNt?"
!Queries the number of packet filter for IP Flow 05.

Function

Queries the current IP Configuration Rule for the forward IP Flow 05.

Query

Range: NMAP|DEF|RULE1|RULE2|RULE3|RULE4|RULE5|RULE6

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow05:MAPPing:RULE?"
!Queries the current IP configuration rule for IP Flow 05.

Function

Queries the Reservation Label KK for the forward IP Flow 06. See IP KK for details.

Query

Range:

• "" (null string)
• "0x00" to "0xFE"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow06:REServation:LABel?"
!Queries the current Reservation Label KK.

Function

Queries the current state of the forward IP Flow 06. See State for details.

Query

Range: UNKN|OPEN|CLOS

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow06:STATe?"
!Queries the current state of IP Flow 06.

Function

Queries the Profile ID of the forward IP Flow 06. See MFPA Profile ID for details.

Query

Range:

• "" (null string)
• "0x0000" to "0xFFFF"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow06:PROFile:IDENtifier?"
!Queries the current profile ID of IP Flow 06.

Function

Queries the priority of the forward IP Flow 06. See Priority for details.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow06:PRIority?"
!Queries the priority of IP Flow 06.

Function

Queries the EMPA AN Scheduler Priority (0 is lowest) of the forward IP Flow 06

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow06:PRIority:ANSCheduler?"
!Queries the priority of IP Flow 06.

Function

Queries which RLP Flow that the forward IP Flow 06 mapped.

Query

Range: NMAP|DEF|FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow06:RLPFlow:MAPPed?"
!Queries the RLP Flow that the IP Flow 06 mapped.

Function

Queries the number of packet filter for the forward IP Flow 06. See Packet Filters for details.

Query

Range:

• 0 to 16
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow06:PFILter:COUNt?"
!Queries the number of packet filter for IP Flow 06.

Function

Queries the current IP Configuration Rule for the forward IP Flow 06.

Query

Range: NMAP|DEF|RULE1|RULE2|RULE3|RULE4|RULE5|RULE6

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow06:MAPPing:RULE?"
!Queries the current IP configuration rule for IP Flow 06.

Function

Queries the Reservation Label KK for the forward IP Flow 07. See IP KK for details.

Query

Range:

• "" (null string)
• "0x00" to "0xFE"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow07:REServation:LABel?"
!Queries the current Reservation Label KK.

Function

Queries the current state of the forward IP Flow 07. See State for details.

Query

Range: UNKN|OPEN|CLOS

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow07:STATe?"
!Queries the current state of IP Flow 07.

Function

Queries the Profile ID of the forward IP Flow 07. See MFPA Profile ID for details.

Query

Range:

• "" (null string)
• "0x0000" to "0xFFFF"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow07:PROFile:IDENtifier?"
!Queries the current profile ID of IP Flow 07.

Function

Queries the priority of the forward IP Flow 07. See Priority for details.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow07:PRIority?"
!Queries the priority of IP Flow 07.

Function

Queries the EMPA AN Scheduler Priority (0 is lowest) of the forward IP Flow 07.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow07:PRIority:ANSCheduler?"
!Queries the priority of IP Flow 07.

Function

Queries which RLP Flow that the forward IP Flow 07 mapped.

Query

Range: NMAP|DEF|FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow07:RLPFlow:MAPPed?"
!Queries the RLP Flow that the IP Flow 07 mapped.

Function

Queries the number of packet filter for the forward IP Flow 07. See Packet Filters for details.

Query

Range:

• 0 to 16
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow07:PFILter:COUNt?"
!Queries the number of packet filter for IP Flow 07.

Function

Queries the current IP Configuration Rule for the forward IP Flow 07.

Query

Range: NMAP|DEF|RULE1|RULE2|RULE3|RULE4|RULE5|RULE6

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow07:MAPPing:RULE?"
!Queries the current IP configuration rule for IP Flow 07.

Function

Queries the Reservation Label KK for the forward IP Flow 08. See IP KK for details.

Query

Range:

• "" (null string)
• "0x00" to "0xFE"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow08:REServation:LABel?"
!Queries the current Reservation Label KK.

Function

Queries the current state of the forward IP Flow 08. See State for details.

Query

Range: UNKN|OPEN|CLOS

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow08:STATe?"
!Queries the current state of IP Flow 08.

Function

Queries the Profile ID of the forward IP Flow 08. See MFPA Profile ID for details.

Query

Range:

• "" (null string)
• "0x0000" to "0xFFFF"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow08:PROFile:IDENtifier?"
!Queries the current profile ID of IP Flow 08.

Function

Queries the priority of the forward IP Flow 08. See Priority for details.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow08:PRIority?"
!Queries the priority of IP Flow 08.

Function

Queries the EMPA AN Scheduler Priority (0 is lowest) of the forward IP Flow 08.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow08:PRIority:ANSCheduler?"
!Queries the priority of IP Flow 08.

Function

Queries which RLP Flow that the forward IP Flow 08 mapped.

Query

Range: NMAP|DEF|FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow08:RLPFlow:MAPPed?"
!Queries the RLP Flow that the IP Flow 08 mapped.

Function

Queries the number of packet filter for the forward IP Flow 08. See Packet Filters for details.

Query

Range:

• 0 to 16
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow08:PFILter:COUNt?"
!Queries the number of packet filter for IP Flow 08.

Function

Queries the current IP Configuration Rule for the forward IP Flow 08.

Query

Range: NMAP|DEF|RULE1|RULE2|RULE3|RULE4|RULE5|RULE6

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow08:MAPPing:RULE?"
!Queries the current IP configuration rule for IP Flow 08.

Function

Queries the Reservation Label KK for the forward IP Flow 09. See IP KK for details.

Query

Range:

• "" (null string)
• "0x00" to "0xFE"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow09:REServation:LABel?"
!Queries the current Reservation Label KK.

Function

Queries the current state of the forward IP Flow 09. See State for details.

Query

Range: UNKN|OPEN|CLOS

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow09:STATe?"
!Queries the current state of IP Flow 09.

Function

Queries the Profile ID of the forward IP Flow 09. See MFPA Profile ID for details.

Query

Range:

• "" (null string)
• "0x0000" to "0xFFFF"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow09:PROFile:IDENtifier?"
!Queries the current profile ID of IP Flow 09.

Function

Queries the priority of the forward IP Flow 09. See Priority for details.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow09:PRIority?"
!Queries the priority of IP Flow 09.

Function

Queries the EMPA AN Scheduler Priority (0 is lowest) of the forward IP Flow 09.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow09:PRIority:ANSCheduler?"
!Queries the priority of IP Flow 09.

Function

Queries which RLP Flow that the forward IP Flow 09 mapped.

Query

Range: NMAP|DEF|FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow09:RLPFlow:MAPPed?"
!Queries the RLP Flow that the IP Flow 09 mapped.

Function

Queries the number of packet filter for the forward IP Flow 09. See Packet Filters for details.

Query

Range:

• 0 to 16
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow09:PFILter:COUNt?"
!Queries the number of packet filter for IP Flow 09.

Function

Queries the current IP Configuration Rule for the forward IP Flow 09.

Query

Range: NMAP|DEF|RULE1|RULE2|RULE3|RULE4|RULE5|RULE6

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow09:MAPPing:RULE?"
!Queries the current IP configuration rule for IP Flow 09.

Function

Queries the Reservation Label KK for the forward IP Flow 10. See IP KK for details.

Query

Range:

• "" (null string)
• "0x00" to "0xFE"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow10:REServation:LABel?"
!Queries the current Reservation Label KK.

Function

Queries the current state of the forward IP Flow 10. See State for details.

Query

Range: UNKN|OPEN|CLOS

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow10:STATe?"
!Queries the current state of IP Flow 10.

Function

Queries the Profile ID of the forward IP Flow 10. See MFPA Profile ID for details.

Query

Range:

• "" (null string)
• "0x0000" to "0xFFFF"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow10:PROFile:IDENtifier?"
!Queries the current profile ID of IP Flow 10.

Function

Queries the priority of the forward IP Flow 10. See Priority for details.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow10:PRIority?"
!Queries the priority of IP Flow 10.

Function

Queries the EMPA AN Scheduler Priority (0 is lowest) of the forward IP Flow 10.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow10:PRIority:ANSCheduler?"
!Queries the priority of IP Flow 10.

Function

Queries which RLP Flow that the forward IP Flow 10 mapped.

Query

Range: NMAP|DEF|FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow10:RLPFlow:MAPPed?"
!Queries the RLP Flow that the IP Flow 10 mapped.

Function

Queries the number of packet filter for the forward IP Flow 10. See Packet Filters for details.

Query

Range:

• 0 to 16
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow10:PFILter:COUNt?"
!Queries the number of packet filter for IP Flow 10.

Function

Queries the current IP Configuration Rule for the forward IP Flow 10.

Query

Range: NMAP|DEF|RULE1|RULE2|RULE3|RULE4|RULE5|RULE6

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow10:MAPPing:RULE?"
!Queries the current IP configuration rule for IP Flow 10.

Function

Queries the Reservation Label KK for the forward IP Flow 11. See IP KK for details.

Query

Range:

• "" (null string)
• "0x00" to "0xFE"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow11:REServation:LABel?"
!Queries the current Reservation Label KK.

Function

Queries the current state of the forward IP Flow 11. See State for details.

Query

Range: UNKN|OPEN|CLOS

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow11:STATe?"
!Queries the current state of IP Flow 11.

Function

Queries the Profile ID of the forward IP Flow 11. See MFPA Profile ID for details.

Query

Range:

• "" (null string)
• "0x0000" to "0xFFFF"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow11:PROFile:IDENtifier?"
!Queries the current profile ID of IP Flow 11.

Function

Queries the priority of the forward IP Flow 11. See Priority for details.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow11:PRIority?"
!Queries the priority of IP Flow 11.

Function

Queries the EMPA AN Scheduler Priority (0 is lowest) of the forward IP Flow 11.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow11:PRIority:ANSCheduler?"
!Queries the priority of IP Flow 11.

Function

Queries which RLP Flow that the forward IP Flow 11 mapped.

Query

Range: NMAP|DEF|FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow11:RLPFlow:MAPPed?"
!Queries the RLP Flow that the IP Flow 11 mapped.

Function

Queries the number of packet filter for the forward IP Flow 11. See Packet Filters for details.

Query

Range:

• 0 to 16
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow11:PFILter:COUNt?"
!Queries the number of packet filter for IP Flow 11.

Function

Queries the current IP Configuration Rule for the forward IP Flow 11.

Query

Range: NMAP|DEF|RULE1|RULE2|RULE3|RULE4|RULE5|RULE6

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow11:MAPPing:RULE?"
!Queries the current IP configuration rule for IP Flow 11.

Function

Queries the Reservation Label KK for the forward IP Flow 12. See IP KK for details.

Query

Range:

• "" (null string)
• "0x00" to "0xFE"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow12:REServation:LABel?"
!Queries the current Reservation Label KK.

Function

Queries the current state of the forward IP Flow 12. See State for details.

Query

Range: UNKN|OPEN|CLOS

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow12:STATe?"
!Queries the current state of IP Flow 12.

Function

Queries the Profile ID of the forward IP Flow 12. See MFPA Profile ID for details.

Query

Range:

• "" (null string)
• "0x0000" to "0xFFFF"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow12:PROFile:IDENtifier?"
!Queries the current profile ID of IP Flow 12.

Function

Queries the priority of the forward IP Flow 12. See Priority for details.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow12:PRIority?"
!Queries the priority of IP Flow 12.

Function

Queries the EMPA AN Scheduler Priority (0 is lowest) of the forward IP Flow 12.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow12:PRIority:ANSCheduler?"
!Queries the priority of IP Flow 12.

Function

Queries which RLP Flow that the forward IP Flow 12 mapped.

Query

Range: NMAP|DEF|FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow12:RLPFlow:MAPPed?"
!Queries the RLP Flow that the IP Flow 12 mapped.

Function

Queries the number of packet filter for the forward IP Flow 12. See Packet Filters for details.

Query

Range:

• 0 to 16
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow12:PFILter:COUNt?"
!Queries the number of packet filter for IP Flow 12.

Function

Queries the current IP Configuration Rule for the forward IP Flow 12.

Query

Range: NMAP|DEF|RULE1|RULE2|RULE3|RULE4|RULE5|RULE6

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow12:MAPPing:RULE?"
!Queries the current IP configuration rule for IP Flow 12.

Function

Queries the Reservation Label KK for the forward IP Flow 13. See IP KK for details.

Query

Range:

• "" (null string)
• "0x00" to "0xFE"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow13:REServation:LABel?"
!Queries the current Reservation Label KK.

Function

Queries the current state of the forward IP Flow 13. See State for details.

Query

Range: UNKN|OPEN|CLOS

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow13:STATe?"
!Queries the current state of IP Flow 13.

Function

Queries the Profile ID of the forward IP Flow 13. See MFPA Profile ID for details.

Query

Range:

• "" (null string)
• "0x0000" to "0xFFFF"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow13:PROFile:IDENtifier?"
!Queries the current profile ID of IP Flow 13.

Function

Queries the priority of the forward IP Flow 13. See Priority for details.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow13:PRIority?"
!Queries the priority of IP Flow 13.

Function

Queries the EMPA AN Scheduler Priority (0 is lowest) of the forward IP Flow 13.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow13:PRIority:ANSCheduler?"
!Queries the priority of IP Flow 13.

Function

Queries which RLP Flow that the forward IP Flow 13 mapped.

Query

Range: NMAP|DEF|FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow13:RLPFlow:MAPPed?"
!Queries the RLP Flow that the IP Flow 13 mapped.

Function

Queries the number of packet filter for the forward IP Flow 13. See Packet Filters for details.

Query

Range:

• 0 to 16
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow13:PFILter:COUNt?"
!Queries the number of packet filter for IP Flow 13.

Function

Queries the current IP Configuration Rule for the forward IP Flow 13.

Query

Range: NMAP|DEF|RULE1|RULE2|RULE3|RULE4|RULE5|RULE6

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow13:MAPPing:RULE?"
!Queries the current IP configuration rule for IP Flow 13.

Function

Queries the Reservation Label KK for the forward IP Flow 14. See IP KK for details.

Query

Range:

• "" (null string)
• "0x00" to "0xFE"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow14:REServation:LABel?"
!Queries the current Reservation Label KK.

Function

Queries the current state of the forward IP Flow 14. See State for details.

Query

Range: UNKN|OPEN|CLOS

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow14:STATe?"
!Queries the current state of IP Flow 14.

Function

Queries the Profile ID of the forward IP Flow 14. See MFPA Profile ID for details.

Query

Range:

• "" (null string)
• "0x0000" to "0xFFFF"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow14:PROFile:IDENtifier?"
!Queries the current profile ID of IP Flow 14.

Function

Queries the priority of the forward IP Flow 14. See Priority for details.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow14:PRIority?"
!Queries the priority of IP Flow 14.

Function

Queries the EMPA AN Scheduler Priority (0 is lowest) of the forward IP Flow 14.

Query

Range:

• 0 to 15
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow14:PRIority:ANSCheduler?"
!Queries the priority of IP Flow 14.

Function

Queries which RLP Flow that the forward IP Flow 14 mapped.

Query

Range: NMAP|DEF|FLOW0|FLOW1|FLOW2|FLOW3|FLOW4

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow14:RLPFlow:MAPPed?"
!Queries the RLP Flow that the IP Flow 14 mapped.

Function

Queries the number of packet filter for the forward IP Flow 14. See Packet Filters for details.

Query

Range:

• 0 to 16
• NAN

Resolution: 1

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow14:PFILter:COUNt?"
!Queries the number of packet filter for IP Flow 14.

Function

Queries the current IP Configuration Rule for the forward IP Flow 14.

Query

Range: NMAP|DEF|RULE1|RULE2|RULE3|RULE4|RULE5|RULE6

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow14:MAPPing:RULE?"
!Queries the current IP configuration rule for IP Flow 14.

Function

Queries the Reservation Label KK for the forward IP Flow 15. See IP KK for details.

Query

Range:

• "" (null string)
• "0x00" to "0xFE"

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow15:REServation:LABel?"
!Queries the current Reservation Label KK.

Function

Queries the current state of the forward IP Flow 15. See State for details.

Query

Range: UNKN|OPEN|CLOS

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:STATus:PROTocol:IP:FORWard:IPFlow15:STATe?"
!Queries the current state of IP Flow 15.