Control Program Examples

HTBASIC

The programming examples shown in the Programming: Getting Started Guide for 1xEV-DO Terminal Test are excerpts from a comprehensive example program based on TAP (Test Application Protocol ) test data connection. This program, written using HTBasic, is a fully functional 1xEV-DO control program. You can use this as a starting point for developing your own program. Click on the link below to view this program.

• Comprehensive Program Example for AT Test (based on TAP test data connection)

A comprehensive example program based on ETAP (Enhanced Test Application Protocol ) test data connection is also provided to help you develop a test program for your Release A access terminal. Click on the link below to view this program.

• Comprehensive Program Example for AT Test (based on ETAP test data connection)

A comprehensive example program based on MCTAP (Multi-carrier Test Application Protocol ) test data connection is also provided to help you develop a test program for your Release B access terminal. Click on the link below to view this program.

• Comprehensive Program Example for AT Test (based on MCTAP test data connection)

To learn more about TAP, ETAP and MCTAP, see C.S0029 Test Application Specification Description (TAP/ETAP/MCTAP) .