This section is only applicable to the lab application.
The following parameters are simple parameters for all RTC MAC Flows, they are accessible only when Physical Layer Subtype is
Subtype 2
or
Subtype 3
(see
Release A Physical Layer Subtype
or
Release B Physical Layer Subtype
). When a session is open, changing these settings will result in a session re-negotiation (see
Session Negotiate State
for details).
This setting sets the merge threshold (in octets) for Reverse Traffic Channel packets.
This setting sets the minimum packet size of a Reverse Traffic Channel packet transmitted in LoLat mode that dose not contain any MAC flows with LoLat transmission mode.
This setting sets the filter time constant used by the AT to compute the filtered serving sector Pilot Strength.
This setting sets the filter time constant used to compute the average T2P when the AT is Open state but not transmitting on the Reverse Traffic Channel due to not receiving the corresponding Forward Channel.
This setting sets the TxT2P that an AT is permitted to transmit at any time.