RTC MAC Simple Parameters

Last updated: July 24, 2008

This section is only applicable to the lab application.

The following parameters are simple parameters for all RTC MAC Flows, they are accessible only when Physical Layer Subtype is Subtype 2 or Subtype 3 (see Release A Physical Layer Subtype or Release B Physical Layer Subtype ). When a session is open, changing these settings will result in a session re-negotiation (see Session Negotiate State for details).

• Merge Threshold

  This setting sets the merge threshold (in octets) for Reverse Traffic Channel packets.

• Payload Thresh

  This setting sets the minimum packet size of a Reverse Traffic Channel packet transmitted in LoLat mode that dose not contain any MAC flows with LoLat transmission mode.

• Pilot Strength Filter Time Constant

  This setting sets the filter time constant used by the AT to compute the filtered serving sector Pilot Strength.

• T2P No Tx Filter Time Constant

  This setting sets the filter time constant used to compute the average T2P when the AT is Open state but not transmitting on the Reverse Traffic Channel due to not receiving the corresponding Forward Channel.

• TxT2P Minimum

  This setting sets the TxT2P that an AT is permitted to transmit at any time.