This section is only applicable to the lab application.
The following settings configure the TxT2P parameters for all RTC MAC Flows, they are accessible only when
Protocol Rel
is
A (1xEV-DO-A)
and
Release A Physical Layer Subtype
is
Subtype 2.
When a session is open, changing these settings will result in a session re-negotiation (see
Session Negotiate State
for details).
The AT shall determine the Pilot Strength by linear interpolation on the Pilot Strength axis, this setting sets the number of occurrences of PilotStrengthAxis field in TxT2Pmax Attribute record.
This setting sets the value of Pilot Strength axis which is used to determine the Pilot Strength.
The AT shall determine the TxT2P Maximum Pilot Strength by linear interpolation on the Pilot Strength axis, this setting sets the maximum TxT2P that the AT is allowed to transmit based on the filtered serving sector Pilot Strength specified by the corresponding Pilot Strength Axis.