How Do I Set Up Data Channel Parameters?
Last updated: July 23, 2008
This section is only applicable to the lab application.
-
Press the
CALL SETUP
key.
-
Press the left
More
key until
3 of 3
is displayed.
-
Press the
Data Channel Info
(
F2
) key.
-
Press the
Data Channel Parameters
(
F1
) key.
-
Turn the knob to highlight a parameter and enter/select a value as desired.
For Example: How to configure Home Agent Shared Secret
-
Turn the knob to highlight the
Home Agent Shared Secret (Hex)
parameter and press the knob, then a mini center menu pops up, and "A-F" softkeys show in right menu for Hex digit input.
-
Input hex string with length from 0 to 32, as the picture shows, "0123456789ABCDEF0123456789ABCDEF", with a length of 32, is assigned to the parameter.
Home Agent Shared Secret Parameters
More than 32 characters results in error -223 "Too much data". An acceptable number of characters, but with 1 or more not in the acceptable set of characters results in error -222, "Data out of range". Odd number of hexadecimal digits input results in error +153, "Even number of hexadecimal digits is required". The return string is also 0-32 characters with the characters from the set 0123456789ABCDEF.
|
top
of page