Calling Party Number Parameters
This section is only applicable to the lab application.
Calling party number parameters can be specified and sent to the called mobile station so that you can evaluate the mobile station's behavior in response to the calling party number (for example, to see whether the mobile station displays the calling party's number as expected). There are two calling parties in the test set.
-
When you originate a call from the test set in a voice or loopback service option (see Service Option ), the information record of the calling party 1 is sent to the called mobile station via the Alert With Information Message (AWIM) identified by the RECORD_TYPE field with a value of 00000011. See How Do I Perform Calling Party Number Verification? for the detailed procedure.
Calling Party 1 is also used for the Call Waiting test together with calling party 2.
The calling party number parameters will not be sent to the mobile station when a call is connected in data service options, such as SO32 and SO33.NOTE
Calling party 2 is only applicable to the Call Waiting test, which is supported in voice service options only. In the test, calling party 1 and 2 parameters are specified and included in the Flash With Information Message (FWIM) or Extended Flash With Information Message (EFWIM) sent to the mobile station when there is a waiting call. See Call Waiting Parameters for details.
Parameters Description
When the test set is in the Active Cell operating mode with IS-2000 or IS-95 system type selected, the following calling party number parameters can be specified under the Calling Party Number Parameters menu by pressing F10 (
Calling Party Number Parms) on theCall Parms 4 of 4.
-
Calling Party Number Inclusion (
CALL:CPNumber:INCLusion
): specifies whether or not the calling party number information records are sent to the called mobile station. The definition and setup of parameters for calling party 1 and calling party 2 are totally same. If
Includeis selected, the five calling party 1 parameters can be specified and included in the AWIM message sent to the called mobile station. And in the Call Waiting test, calling party 1 and 2 parameters can be specified and included in the FWIM or EFWIM sent to the mobile station when there is a waiting call.- Calling Party Number (CHARi) ( CALL:CPNumber[1][:SELected] and CALL:CPNumber2[:SELected] ): indicates the ASCII representation of each character in the calling party number. Up to 20 characters from the set of 0123456789abc*# can be entered but up to 14 characters can be displayed. If the entered string is greater than 14 characters, only the first 11 entered characters followed by a "..." are displayed. The digits of 0-9 are entered from the DATA ENTRY keys and the characters of "abc*#" are entered from the new displayed softkeys on the right of the screen. If Calling Party 1 Number is set to the same value as Calling Party 2 Number, the change will be rejected and an error will be generated.
- Number Type (NUMBER_TYPE) ( CALL:CPNumber[1]:TYPE and CALL:CPNumber2:TYPE ): specifies the type of number used for the calling party number. See Number Types
- Number Plan (NUMBER_PLAN) ( CALL:CPNumber[1]:PLAN CALL:CPNumber2:PLAN ): specifies the numbering plan used for the calling party number. See Number Plan
- Presentation Indicator (PI) ( CALL:CPNumber[1]:PRESentation[:INDicator] and CALL:CPNumber2:PRESentation[:INDicator] ): specifies whether or not to allow the calling party number displayed on the called mobile station's screen. See Presentation Indicators
- Screening Indicator (SI) ( CALL:CPNumber[1]:SCReening[:INDicator] CALL:CPNumber2:SCReening[:INDicator] ): indicates how the calling number was screened. See Screening Indicators
Number Types Abbreviated Abbreviated number Number Plan Presentation Indicators Screening Indicators User Verify Fail User-provided, verified and failed 0011