How Do I Access the Data Counters?

Last updated: October 28, 2004

This section is only applicable to the lab application.

The test set's data channel features include counters that increment as RLP (Radio Link Protocol) and IP (Internet Protocol) data is transferred to/from a wireless device (see Data Counters ).

There are two tables that provide RLP and IP frame counts. The first is labeled Counters and is accessed as follows:

1. Press the CALL SETUP key.
2. Press the left More key until screen 3 of 3 is displayed.
3. Press the Data Channel ( F2 ) key.

   The Counters table is shown at the bottom of the Data Channel screen.

   
4. (Optional) To clear the information in the Counters table, press the Clear All Counters ( F3 ). The counters will also be cleared when the test set cycles power or full presets.
5. Press the RLP Counters Info ( F4 ) key, a more detailed RLP counters information table is displayed.
   
6. (Optional) To clear the information in the RLP Counters Information table, press the Clear RLP Counters ( F3 ). The counters will also be cleared when the test set cycles power or full presets.