C learing the SMS Info/Status

Last updated: January 3, 2008

This section is applicable to the lab application and to a test application with the required feature license.

To clear the information shown on the SMS Message Acknowledge Info window and the information about the received SMS message shown on the Mobile-Originated Message and Mobile-Terminated SMS Info windows, press the F5 ( Clear SMS Info/Status ) which is accessed as follows:

1. Press the Call Setup key.
2. Press the More key on the lower left side of the test set two times until 3 of 3 of the Call Control menu is displayed.
3. Press the F5 ( Short Message Service ), go to SMS Control menu.
4. Press the F5 ( Clear SMS Info/Status ).