Agilent Technologies Home Page 8960 Series 10 Wireless Communications Test Set
- +
Home | Product Web Site | Contact Us
+
- -
+ -
8960 cdma2000 Online User's Guide
E1962B, E6702B
Search this guide for     
search tips



Feedback
Did the information on this web page help answer your question or solve a problem?

Yes
No
Did not apply

Please provide additional comments about this page.
(Optional, 255 character max)


Email address (optional):

Privacy Notice: We will not sell or give away your email address to any third party.

 



Protocol Logging Requirements

Last updated: June 18, 2007

This section is only applicable to the lab application and to a test application with the required feature license.

The Lab Application enables the test set to log protocol messages. Protocol messages are forwarded to the Wireless Protocol Advisor (WPA) software, which is required for message display and analysis. This software is included with the lab application and will run on PCs that meet the following system requirements:

Summary of Requirements for the Wireless Protocol Advisor

   
NOTE
These requirements are subject to change or addition without notice. Always refer to the product web page for the latest information.

   

  • PC Operating System:
    • Microsoft® Windows® 98
    • Microsoft® Windows® NT 4 SP3/4/5
    • Microsoft® Windows® 2000
    • Microsoft® Windows® XP
  • 300 MHz Pentium or equivalent recommended
  • 128 MB RAM recommended
  • 250 MB available disk space required for installation
  • 100 MB available disk space recommended for storing logged information
  • Video resolution minimum 800 by 600 pixels with at least 256 colors
  • LAN or WAN card must be installed and connected to a network


Top of pagetop of page     

+ +