|
|
Last updated: October 28, 2004
The F-Pilot/Pilot parameters are configured using the following call processing subsystem functions and commands:
To set the parameters using the test set's front panel, see How Do I Change Generator Information? .
OUTPUT 714;"CALL:PIL -8 DB"
would set the F-Pilot state on and set the level to -8 dB. See CALL[:CELL[1]]:PILOT[:SLEVel][:SELected] .
OUTPUT 714;"CALL:PIL:LEVel?"
would query the last setting that was made to the F-Pilot level. See CALL[:CELL[1]]:PILOT:LEVel[:SELected] .
The Walsh code number for the F-Pilot channel is fixed at code 0 of the Walsh 64 set.
|
|
|