How Do I Change TDSO Supplemental Channel Information?

A. Select the TDSO Service Option.

1. Press the CALL SETUP key.
2. Press the Radio Config ( F11 ) key and select the radio configuration (Fwd3, Rvs3) or (Fwd4, Rvs3).
3. Press the FCH Service Option Setup ( F12 ) key and set the service option for the selected radio configuration (Fwd3, Rvs3) or (Fwd4, Rvs3) to SO32 (+ F-SCH) or SO32 (+ SCH).

B. Set the TDSO Supplemental Channel Information.

1. Press the More key on the left side of the display.
2. Press the TDSO SCH Info ( F4 ) key.
   
      

   NOTE

   The TDSO supplemental channel parameters are accessible regardless of the service option currently selected, but the parameter settings are stored for use when the service option is set to SO32 (+ F-SCH) or SO32 (+ SCH).

   ---

      

3. Set the forward supplemental channel parameters.
   
   • Press the F-SCH Parameters ( F2 ) key.
   • Change the parameters as needed using the knob and/or keypad.
   • Press the Close Menu ( F6 ) key.
4. Set the reverse supplemental channel parameters.
   
   • Press the R-SCH Parameters ( F4 ) key.
   • Change the parameters as needed using the knob and/or keypad.
   • Press the Close Menu ( F6 ) key.
5. Press the Return ( F6 ) key.

Setting F-SCH Levels

To set the F-SCH level, see How Do I Change Generator Information? .

Related Topics

Configuring the TDSO Supplemental Channel Information