Sets/queries the maximum number of alternative service options that the mobile station is allowed to include. | |
OUTPUT 714;"CALL:CELL:SOPTion:ALTernate:COUNt:MAXimum 7" |
Sets/queries the service option for the system type and radio configuration specified by command parameters. See Service Option . The first optional [:SELected] keyword in this command specifies that the service option being set/queried applies to the current system type. See CALL[:CELL]:SYSTem[:TYPE] to query or change the current system type. The second optional [:SELected] keyword in this command specifies that the service option being set/queried applies to the current radio configuration. This keyword only applies in situations where DIGital2000 is the selected system type, since no other system type uses radio configurations. To set (make current) a radio configuration or query the current radio configuration, use the CALL:RCONfig command. Note: If the current system type evaluates to DIGital95, radio configurations (RCONfig 1-5) do not apply and attempting to specify a radio configuration will cause an error. For example, SO 33 can be selected only when the current radio configuration is RCONfig3, RCONfig4, RCONfig5, or RCONfig6. Specifying a non-current radio configuration when setting a service option will cause the test set to store that service option for use when the specified radio configuration is current. Specifying a non-current radio configuration when querying a service option will return a stored service option that is not the current service option. To set (make current) a radio configuration or query the current radio configuration, use the CALL:RCONfig command.
|
|
Range: SO1|SO2|SO3|SO6|SO9|SO14|SO17|SO55|SO32768|SOFS32|SOS32 |SO33|SOFS33|SO68 |SO70 |SO73|SO75 depending on system type and radio configuration. |
|
SO2 when system type is DIGital95 or when system type is DIGital2000 and radio configuration RCONfig1, RCONfig3, or RCONfig4 are selected. SO17 when system type is DIGital2000 and radio configuration RCONfig2 or RCONfig5 are selected. |
|
Test Application Revision: B.03 and above: Added SOFS32, SOS32 |
|
OUTPUT 714;"CALL:CELL:SOPTION?" !Queries the service option of the currently selected system type and radio configuration. OUTPUT 714;"CALL:CELL:SOPTION SO3" !Selects service option 3 for the currently selected system type and radio configuration. OUTPUT 714;"CALL:CELL:SOPTION:DIGital2000:RCONFIG3 SO3" !Sets the service option for the digital 2000 system and radio configuration 3 to service option 3. !If this system and radio configuration are not current, service option 3 is stored and will be !used when digital 2000 and radio configuration 3 are current. OUTPUT 714;"CALL:CELL:SOPTION SO33" !Selects service option 33 for the currently selected system type and radio configuration. OUTPUT 714;"CALL:CELL:SOPTION:DIGital2000:RCONFIG3 SO33" !Sets the service option for the digital 2000 system and radio configuration 3 to service option 33. !If this system and radio configuration are not current, service option 33 is stored and will be !current when digital 2000 and radio configuration 3 are current. |
Sets/queries the service option used on the Fundamental channel when Radio Configuration is set to RC6. See Radio Configuration . | |
Range: SO1 | SO2 | SO3 | SO6 | SO68 | SO70 | SO73 | SO75 | SO32(+F-SCH) | SO32(+SCH) | SO33 | SO33(+F-SCH) |
|
Range: SO1 | SO2 | SO3 | SO6 | SO68 | SO70 | SO73 | SO75 | SOFS32 | SOS32 | SO33 | SOFS33 |
|
OUTPUT 714;"CALL:SOPTion:RCINfig6 SO73" |
Sets/queries the service option used on the Fundamental channel when IS-2000 Radio Configuration is set to RC6. See Radio Configuration . | |
Range: SO1 | SO2 | SO3 | SO6 | SO68 | SO70 | SO73 | SO75 | SO32(+F-SCH) | SO32(+SCH) | SO33 | SO33(+F-SCH) |
|
Range: SO1 | SO2 | SO3 | SO6 | SO68 | SO70 | SO73 | SO75 | SOFS32 | SOS32 | SO33 | SOFS33 |
|
OUTPUT 714;"CALL:SOPTion:DIGital2000:RCONfig6 SO73" |
Sets/queries whether the data source for Loopback Service Options is reset on every even second boundary. See LSO Data Reset (This function is only applicable to the lab application.) | |
Lab Application Revision: B.06 and above. | |
OUTPUT 714;"CALL:SOPTion:LOOPback:DSOurce:RESet ON" |
Configure the EVRC-B Encoder Operating Point. See Encoder Operating Point |
|
Range: MSSPecified | POINt0 | POINt1 | POINt2 | POINt3 | POINt4 | POINt5 | POINt6 | POINt7 |
|
Test Application Revision: B.14 and above | |
OUTPUT 714;"CALL:SOPTion:SO68:ENCoder:POINt POINt0" !Sets the EVRC-B Encoder Operating Point to be point 0. |
Configure the EVRC-WB Encoder Operating Point. See Encoder Operating Point |
|
Test Application Revision: B.14 and above: Added SO70 | |
OUTPUT 714;"CALL:SOPTion:SO70:ENCoder:POINt POINt0" !Sets the EVRC-WB Encoder Operating Point to be point 0. |
Configure the EVRC-NW Encoder Operating Point. See Encoder Operating Point |
|
Range: MSSPecified | POINt0 | POINt1 | POINt2 | POINt3 | POINt4 | POINt5 | POINt6 | POINt7 |
|
OUTPUT 714;"CALL:SOPTion:SO73:ENCoder:POINt POINt0" !Sets the EVRC-NW Encoder Operating Point to be point 0. |