+230 "CDMA operation rejected; PN offset of different cells cannot be set to the same value"
|
This error message is displayed for information purposes only.
|
+231 "CDMA operation rejected; Start/stop MER/FER procedure ignored due to no call connected"
|
This error message is displayed for information purposes only.
|
+232 "CDMA operation rejected; Start paging MER procedure ignored due to no paging channel"
|
This error message is displayed for information purposes only.
|
+233 "CDMA operation rejected; Start control channel FER procedure ignored due to no control channel"
|
This error message is displayed for information purposes only.
|
+234 "CDMA operation rejected; Stop MER/FER procedure ignored due to no procedure in progress"
|
This error message is displayed for information purposes only.
|
+235 "CDMA operation rejected; Power control sub-channel transient queue full"
|
This error message is displayed for information purposes only.
|
+236 "CDMA operation rejected; Authentication is not licensed"
|
An additional feature license is required to enable the authentication functionality in a licensed test application.
|
+237 "CDMA operation rejected; Data out of range for CDMA system time or local time offset"
|
This error message is displayed for information purposes only.
|
+238 "CDMA operation rejected; Multi-Unit Sync feature is not licensed. See www.keysight.com/find/8960upgrades for additional information" |
This error message is displayed for information purposes only. |
+239 "CDMA call processing error; Message length must match value of length field
|
This error message is displayed for information purposes only. |
+240 "CDMA call processing error; Operation not allowed due to current call status" |
This error message is displayed for information purposes only. |
+241 "CDMA call processing error; OTA send message truncated due to protocol; <size> characters sent"
|
This error message is displayed for information purposes only. <size> is an integer which is reported as the size of the truncated OTA message.
|
+247 "QOF MASK ID cannot be changed while a call is connected"
|
This error message is displayed when the QOF MASK ID is changed during the call control status is connected.
|
+250 "CDMA call processing error; SSD update failed due to call status change in progress"
|
This error message is displayed for information purposes only.
|
+251 "CDMA call processing error; Unique challenge failed due to call status change in progress"
|
This error message is displayed for information purposes only.
|
+253 "CDMA call processing error; Operation not allowed due to incorrect operating mode or system type"
|
This error message is displayed for information purposes only.
|
+254 "CDMA call processing error; Operation not allowed due to call status not idle"
|
This error message is displayed for information purposes only.
|
+255 "CDMA call processing error; Synchronizing to external server failed due to no response from external server"
|
This error message is displayed for information purposes only.
|
+256 "CDMA call processing error; Synchronizing to external server failed due to unknown error on external server"
|
This error message is displayed for information purposes only.
|
+257 "CDMA call processing error; Synchronizing to external server failed due to incorrect operating mode or system type on external server"
|
This error message is displayed for information purposes only.
|
+258 "CDMA call processing error; Synchronizing to external server failed due to external trigger not set to 2s on external server"
|
This error message is displayed for information purposes only.
|
+259 "CDMA call processing error; Synchronizing to external server failed due to multi-unit synchronization feature not available on external server"
|
This error message is displayed for information purposes only.
|
+260 "CDMA call processing error; Synchronizing to external server failed due to unexpected response received"
|
This error message is displayed for information purposes only.
|
+261 "CDMA call processing error; Synchronizing to external server failed due to no trigger received from TRIG IN"
|
This error message is displayed for information purposes only.
|
+262 "CDMA call processing error; Enhanced origination message (EOM) is not supported"
|
This error message is displayed for information purposes only.
|
+263 CDMA call processing error; SSD update confirmation order not received in response to base station challenge response order
|
This error message is displayed for information purposes only.
|
+264 CDMA call processing error; SSD update failed due to SSD update rejection order received
|
This error message is displayed for information purposes only.
|
+265 CDMA call processing error; SSD update rejected by MS
|
This error message is displayed for information purposes only.
|
+266 CDMA call processing error; Base station challenge order not received in response to SSD update message (SSDUM)
|
This error message is displayed for information purposes only.
|
+267 CDMA call processing error; Unique challenge rejected by MS
|
This error message is displayed for information purposes only.
|
+268 CDMA call processing error; Authentication challenge response message (AUCRM) not received in response to authentication challenge message (AUCM)
|
This error message is displayed for information purposes only.
|
+269 CDMA call processing error; Parameter(s) in retrieve parameter message (RTPM) not supported by MS
|
This error message is displayed for information purposes only.
|
+270 CDMA call processing error; Traffic channel preamble not received
|
This error message is displayed for information purposes only.
|
+271 CDMA call processing error; MS ack of initial BS ack order not received
|
This error message is displayed for information purposes only. |
+272 CDMA call processing error; MS ack order not received
|
This error message is displayed for information purposes only.
|
+273 CDMA call processing error; Service negotiation failed due to MS messaging
|
Some mobile stations do not support all service options provided for a given radio configuration. Use the FCH Service Option Setup (F12) key to select a different service option. |
+274 CDMA call processing error; Service response not received
|
This error message is associated with a failed call attempt or dropped call.
|
+275 CDMA call processing error; Service request not received
|
This error message is associated with a failed call attempt or dropped call.
|
+276 CDMA call processing error; Service connect completion not received
|
This error message is associated with a failed call attempt or dropped call.
|
+277 CDMA call processing error; Call drop timer timed out
|
This error message is associated with a dropped call.
|
+278 CDMA call processing error; Status response not received
|
This error message is displayed for information purposes only.
|
+279 CDMA call processing error; Walsh code cannot be changed while a call is connected
|
This error message is displayed for information purposes only.
|
+280 CDMA call processing error; Set parameters message (STPM) rejected by MS
|
This error message is displayed for information purposes only.
|
+281 CDMA call processing error; Origination failed due to F-FCH/Traffic state off
|
This error message is associated with a failed call attempt.
|
+282 CDMA call processing error; Power control step size rejected
|
This error message is displayed for information purposes only.
|
+283 CDMA call processing error; Session timer timed out
|
This error message is displayed for information purposes only.
|
+284 CDMA call processing error; SMS message not received after MS origination in SMS service option
|
This error message is displayed for information purposes only.
|
+285 CDMA call processing error; SMS mobile originated message received in SMS service option without MS disconnect
|
This error message is displayed for information purposes only.
|
+286 CDMA call processing error; SMS receive messaging in progress
|
This error message is displayed for information purposes only.
|
+287 CDMA call processing error; SMS end does not apply to BS page. Use end call
|
This error message is displayed for information purposes only.
|
+288 CDMA call processing error; SMS send not allowed due to current call status
|
This error message is displayed for information purposes only.
|
+289 CDMA call processing error; SMS message padded with trailing zeros to define whole characters
|
This error message is displayed for information purposes only.
|
+290 CDMA call processing error; SMS send message truncated due to protocol; <size> characters sent
|
This error message is displayed for information purposes only.
|
+291 CDMA call processing error; SMS send timeout occurred waiting for MS ack
|
This error message is displayed for information purposes only.
|
+292 CDMA call processing error; SMS send message input character rejected due to SMS message at maximum length
|
This error message is displayed for information purposes only.
|
+293 CDMA call processing error; Parameter response message (PRSM) not received in response to retrieve parameter message (RTPM)
|
This error message is displayed for information purposes only.
|
+294 CDMA call processing error; R-FCH gating failed due to MS messaging
|
This error message is displayed for information purposes only.
|
+295 CDMA call processing error; R-FCH gating cannot be changed while a call is connected
|
This error message is displayed for information purposes only.
|
+296 CDMA call processing error; SMS mobile originated message received. Origination denied due to current SMS receive protocol (disabled)
|
This error message is displayed for information purposes only.
|
+297 CDMA call processing error; SMS mobile originated message received. SMS not supported by base station due to current SMS receive protocol (not supported)
|
This error message is displayed for information purposes only.
|
+298 CDMA call processing error; SMS mobile originated message received. SMS not supported by base station due to current SMS receive protocol (unknown destination address)
|
This error message is displayed for information purposes only.
|
+299 CDMA call processing error; SMS broadcast message not allowed on BCCH
|
This error message is displayed for information purposes only.
|