Last updated: December 2, 2008
The following commands are incompatible during an active Dual Transfer Mode (DTM) session in Active Cell operating mode or while the test set's operating mode is set to either GPRS BCH+TCH+PDTCH or EGPRS BCH+TCH+PDTCH. If any of the these commands are attempted while there is an active DTM session or while the test set is in a DTM test operating mode, they are stored and applied when the test set ends the DTM session or leaves the DTM operating mode.
Parameter | Command |
---|---|
TCH Channel | CALL:TCHannel[:ARFCn][:SELected] |
TCH Band | CALL:TCHannel:BAND |
TCH Timeslot | CALL:TCHannel:TSLot |
TCH Power Level | CALL:TCHannel:PREDuction:LEVel([1]|2) |
Deferred TCH Settings | |
CALL:TCHannel:FHOPping[:STATe] | |
Frequency Hopping Mobile Allocation (MA) Table Configuration Mode | |
Frequency Hopping Mobile Allocation (MA) Table Automatic Configuration | |
Frequency Hopping Mobile Allocation (MA) Table Manual Configuration | |
Frequency Hopping Mobile Allocation (MA) Table Points Manual Configuration | |
Frequency Hopping Mobile Allocation (MA) Table Points Automatic Configuration | |
Frequency Hopping Measurement ARFCN | |
CALL:(PDTCH|PDTChannel):MS:TADVance:CONTinuous | |
PDTCH Timing Advance Value | |
CALL:(PDTCH|PDTChannel):MS:TXLevel[:SELected]:BURSt<[1]|2|3|4|5> |
|