Measurements Call Processing Programming GPIB Commands Manual Operation Troubleshooting Configuration Release Notes Fast Switching PDF Manuals

Feedback Did the information on this web page help answer your question or solve a problem? Yes No Did not apply Please provide additional comments about this page. (Optional, 255 character max)

How Do I Change Cell Parameters?

Last updated: May 8, 2002

This section is not applicable to GSM.

You can only change two cell parameters - 3 Digit MNC for PCS1900 and Guard Period Length. Other cell parameters such as MCC, MNC, and LAC are fixed. To change the 3 digit MNC for PCS1900 the cell must be set to off by pressing the CALL SETUP key, then Operating Mode ( F1 ), and then selecting Cell Off .

A. Select the Cell Parameters menu.

1. Press the CALL SETUP key.
2. Press the Cell Info ( F6 ) key.
3. Press the Cell Parameters ( F2 ) key.

B. Set a cell parameter.

1. Highlight a parameter and press the knob.
2. Enter a value or selection and press the knob.
3. Press the Close Menu ( F6 ) key.