|
|
|
|
How Do I Configure the Test Set for My Test System?
Last updated: May 8, 2002
This section is
not
applicable to GSM.
A. Configure instrument information and setup.
-
Press the
SYSTEM CONFIG
key.
-
Press the
Instrument Setup
(
F1
) key.
-
Adjust an instrument setting and then press the
Close Menu
(
F6
) key.
B. Set amplitude offsets.
-
On the Configuration Summary screen, press the
RF IN/OUT Amptd Offset
(
F5
) key.
-
On the RF IN/OUT Amplitude Offset screen, press the
RF IN/OUT Amptd Offset Setup
(
F2
) key.
-
Enter the amplitude offsets for the test frequencies you use.
-
Press the
Close Menu
(
F6
) key.
-
Press the
Return
(
F6
) key to return to the Configuration Summary screen.
C. Check the message log.
-
Press the
Message Log
(
F7
) key and view the message log.
-
Press the
Return
(
F12
) key.
Back to Top
|
