CALL:PPRocedure:PDPContext

CALL:PPRocedure:PDPContext

Last updated: December 3, 2008

GPIB Command Conventions

CALL:PPRocedure[:QOSProfile[1]|2|3|4]:PDPContext:AACCept:QOService:RCLass:SUBScribed

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Sets/Queries the Subscribed Reliability Class of QOS Profile 1, 2, 3 or 4 which represents Quality of Service Reliability Class that will be supplied to the MS if it requests its subscribed value. The subscribed reliability class is only applicable for pre R99 Context Request messages. See GSM 05.08 for specific values. Some values are listed below.
EGPRS LA

Setting

Range: 0 to 7 (decimal)

0: (Undefined)
1: (Ack GTP, LLC, RLC;Protected Data)
2: (Unack GTP, ack LLC, RLC;Protected Data)
3: (Unack GTP, LLC, ack RLC;Protected Data)
4: (Unack GTP, LLC, RLC;Protected Data)
5: (Unack GTP, LLC, RLC;Unprotected Data)
6: (Undefined)
7: (Undefined)

Query

0 to 7

*RST Setting

3 for QOS Profile 1

4 for QOS Profile 2, 3, and 4.

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above for QOS Profile 1

E.00.12 and above for QOS Profile 2, 3 and 4.

Programming Example:

 
OUTPUT 714;"CALL:PPROCEDURE:QOSPROFILE2:PDPCONTEXT:AACCEPT:QOSERVICE:RCLASS:SUBSCRIBED 5"
! Sets the subscribed QoS Reliability Class of QOS Profile 2 to 5. 

CALL:PPRocedure[:QOSProfile[1]|2|3|4]:PDPContext:AACCept:QOService:RCLass:ENForce:[SVALue]

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Complex command to both set the PDP Context Accept Override Reliability Class state to On and set/query the PDP Context Accept Override Reliability Class Value for QOS Profile 1, 2, 3 or 4 respectively. See GSM 04.08 for specific values. The values are listed below.
EGPRS LA

Setting

Range: 0 to 7 (decimal)

0: (Undefined)
1: (Ack GTP, LLC, RLC;Protected Data)
2: (Unack GTP, ack LLC, RLC;Protected Data)
3: (Unack GTP, LLC, ack RLC;Protected Data)
4: (Unack GTP, LLC, RLC;Protected Data)
5: (Unack GTP, LLC, RLC;Unprotected Data)
6: (Undefined)
7: (Undefined)

Query

0 to 7

*RST Setting

3 for QOS Profile 1

4 for QOS Profile 2, 3 and 4

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above for QOS Profile 1

E.00.12 and above for QOS Profile 2, 3 and 4

Programming Example:

 
OUTPUT 714;"CALL:PPROCEDURE:QOSPROFILE2:PDPCONTEXT:AACCEPT:QOSERVICE:RCLASS:ENFORCE:SVALUE 1"
! The test set will now override the QoS requested by the MS if QOSPROFILE2 is allocated. 

CALL:PPRocedure[:QOSProfile[1]|2|3|4]:PDPContext:AACCept:QOService:RCLass:ENForce:STATe

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets/Queries the Override Requested Reliability Class state of QOS Profile 1, 2, 3 or 4.

EGPRS LA
Setting

Range: 0|OFF|1|ON

Query

Range: 0|1

*RST setting

0

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above for QOS Profile 1

E.00.12 and above for QOS Profile 2, 3 and 4

Programming Example:

 
OUTPUT 714;"CALL:PPROCEDURE:QOSPROFILE2:PDPCONTEXT:AACCEPT:QOSERVICE:RCLASS:ENFORCE:STATE 1"
! The test set will now override the QoS requested by the MS if QOSPROFILE2 is allocated. 

CALL:PPRocedure[:QOSProfile[1]|2|3|4]:PDPContext:AACCept:QOService:RCLass:ENForce:VALue

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Sets/Queries the Override Requested Reliability Class Value of QOS Profile 1, 2, 3 or 4 which represents Quality of Service Reliability Class that will be supplied to the DUT when the Override Requested Reliability Class State is set to ON. See GSM 04.08 for specific values. The values are listed below.
EGPRS LA

Setting

Range: 0 to 7 (decimal)
0: (Undefined)
1: (Ack GTP, LLC, RLC;Protected Data)
2: (Unack GTP, ack LLC, RLC;Protected Data)
3: (Unack GTP, LLC, ack RLC;Protected Data)
4: (Unack GTP, LLC, RLC;Protected Data)
5: (Unack GTP, LLC, RLC;Unprotected Data)
6: (Undefined)
7: (Undefined)

Query

0 to 7

*RST Setting

3 for QOS Profile 1

4 for QOS Profile 2, 3 and 4

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above for QOS Profile 1

E.00.12 and above for QOS Profile 2, 3 and 4

Programming Example:

 
OUTPUT 714;"CALL:PPROCEDURE:QOSPROFILE2:PDPCONTEXT:AACCEPT:QOSERVICE:RCLASS:ENFORCE:Value 1"
! Set the Override Reliability Class value of QOS Profile 2 to 1. 

CALL:PPRocedure:PDPContext:AREJect:SMCause

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Sets/Queries the SM Cause for Rejecting PDP Context.
EGPRS LA
Setting

Range: 0 to 255 (decimal) See SM Cause Information Element .

Query

Range: 0 to 255

*RST setting

111

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPROCEDURE:PDPCONTEXT:AREJECT:SMCAUSE 37"
! The test set sends SM Cause value 37 to the MS when it rejects its PDP Context Request 

CALL:PPRocedure:PDPContext:AREJect:STATe

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets/Queries the PDP Context Reject state. See Activate PDP Context Reject

EGPRS LA
Setting

Range: 0|OFF|1|ON

Query

Range: 0|1

*RST setting

0

Requirements

GSM/GPRS/ EGPRS LA

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:PPROCEDURE:PDPCONTEXT:AREJECT:STATE 1"
! Sets the test set to reject all PDP Context Requests 

CALL:PPRocedure[:QOSProfile]:PDPContext:NINitiated[:STATe]

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets/Queries the Network Initiated PDP Context state. See Network Initiated PDP Context

EGPRS LA
Setting

Range: 0|OFF|1|ON

Query

Range: 0|1

*RST setting

1

Requirements

GSM/GPRS/ EGPRS LA

Revision: F.00.27 and above

Programming Example:

 
OUTPUT 714;"CALL:PPR:PDPC:NIN 1"
! Sets the Network Initiated PDP Context State to ON

CALL:PPRocedure[:QOSProfile[1]|2|3|4]:PFI

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Sets/Queries Packet Flow Identifier (PFI) of QOS Profile 1, 2, 3 or 4 respectively.
EGPRS LA
Setting

Range: 0, 2, 8 to 127

Query

Range: 0, 2, 8 to 127

*RST setting

0

Requirements

GSM/GPRS/ EGPRS LA

Revision: F.00.37 and above

Programming Example:

 
OUTPUT 714;"CALL:PPROCEDURE:QOSPROFILE2:PFI 2"
! Set the PFI of QOS Profile 2 to 2 (SMS). 

CALL:PPRocedure[:QOSProfile[1]|2|3|4]:TCLass

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA Sets/Queries Traffic Class of QOS Profile 1, 2, 3 or 4 respectively.
EGPRS LA
Setting

Range: CONVersation | STReaming | INTeractive | BACKground

Query

Range: CONV |STR | INT |BACK

*RST setting

INT

Requirements

GSM/GPRS/ EGPRS LA

Revision: E.00.12 and above

Programming Example:

 
OUTPUT 714;"CALL:PPROCEDURE:QOSPROFILE2:TCLass STR"
! Set the Traffic class of QOS Profile 2 to Streaming. 

CALL:PPRocedure[:QOSProfile[1]|2|3|4]:THPRiority

Function

GSM TA

This command is not applicable to the GSM Test Application.
GPRS TA

This command is not applicable to the GPRS Test Application.

EGPRS TA

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets/Queries the Traffic Handling Priority of QOS Profile 1, 2, 3 or 4 respectively.

EGPRS LA
Setting

Range: 1 to 3

Resolution: 1

Query

Range: 1 to 3

*RST setting

2

Requirements

GSM/GPRS/ EGPRS LA

Revision: E.00.12 and above

Programming Example:

 
OUTPUT 714;"CALL:PPROCEDURE:QOSPROFILE2:THPRIORITY 1"
! Sets Traffic Handling Priority of QOS Profile 2 to 1.