How Do I Perform an EGPRS Handover?

Last updated: December 2, 2008

This section is not applicable to GSM or GPRS.

1. Press the CALL SETUP key.
2. Press the Handover Parameters ( F10 ) key.
3. Press the EGPRS Handover Setup key.
4. Change the various parameters, for example Traffic Band .
5. Press the Handover Execute ( F5 ) key to complete the handover, or press the Close Menu ( F6 ) key to abort the handover.
6. Check for Transferring in the Active Cell field.
7. After the handover is executed, press the PDTCH Parameters ( F9 ) key to check that the changes have been implemented on the PDTCH Parms menus (1 of 3) and (2 of 3).