How Do I Make EGPRS Measurements on a Mobile?

Last updated: December 2, 2008

This section is not applicable to GSM or GPRS.

A. Establish a data connection.

1. Press the blue SHIFT key.
2. Press the green Preset key.
3. Press the CALL SETUP key.
4. Press Operating Mode ( F1 ) and select Active Cell (EGPRS) .
5. Connect the mobile.

6. Turn the mobile on and wait for Attached in the Active Cell: field.

      

   NOTE

   For mobiles that don't perform EGPRS attach automatically, set the mobile to data mode.

   ---

      

7. Press the Start Data Connection ( F3 ) key and watch for the Active Cell: field changing to Transferring .

B. Select measurements.

1. Press the Measurement selection key.
2. Highlight a measurement and press the knob.
3. Repeat steps 1 and 2 to add measurements.