Last updated: December 2, 2008
This section is only applicable to the EGPRS lab application.
Operating Mode
(
F1
) and select
Active Cell (EGPRS)
.
PDTCH Parameters
(
F9
) from the
Call Parms
menu.
Modulation Coding Scheme
(
F11
) from the
PDTCH Parms
menu. The
Modulation Coding Scheme
popup menu appears.
Downlink Modulation Coding Scheme
or
Uplink Modulation Coding Scheme
and set the value you want. The modulation format is different depending on the MCS you select:
Puncturing Scheme
and scroll to the desired value. The puncturing schemes available depend on the modulation and coding scheme you selected above.
The
Incremental Redundancy
parameter must be set to
Off
for you to specify which puncturing scheme is to be used. When
Incremental Redundancy
is
On
, the puncturing scheme setting is controlled by an algorithm in the test set.