Configuring the Broadcast Channel (BCH)
Last updated: December 2, 2008
The broadcast channel parameters are configured using the following call processing subsystem commands.
For a complete list of GPIB commands in the call processing subsystem, refer to
CALL Subsystem
.
Broadcast Channel Parameters
Operating Considerations
There are a number of parameters for the broadcast channel and the traffic channel (see
Configuring the Traffic Channel (TCH) Parameters
) that can be configured, however the test set's default parameters should allow a properly functioning mobile station to successfully camp on the cell and make a call under most circumstances.
Parameters can be queried from the test set regardless of the state of the test set.
The 3 Digit MNC for PCS parameter defines if the PCS BCCH should be configured using the standard 2-digit MNC (J-STD-007 coding), or the PCS 3-digit MNC (J-STD-007A coding, section 2.10.5.1.3). The PCS 3-digit MNC is used on the PCS BCCH instead of the 2-digit MNC only when the current cell band is PCS and the 3 Digit MNC for PCS parameter is set to on.
|
top
of page