How Do I Configure the Control Channel Parameters?

Procedure

This procedure assumes that the BCH parameter for Cell Band is set up correctly for your mobile station and that the appropriate RF IN/OUT Amplitude Offsets have been set to offset loss between the mobile station and the test set.

1. Press CALL SETUP .
2. Press the bottom left More key until Control menu ( 2 of 3 ) appears.
3. Press Protocol Control ( F4 ).
4. Press RLC/MAC ( F2 ).
5. Press the bottom left More key until RLC/MAC Ctrl menu (2 of 2) appears.
6. Press Control Channel Setup ( F5 ).
7. Press Control Channel Parameters ( F1 ). This opens the Control Channel Parameter menu in the center of the screen.
8. Use the knob to highlight the parameter and to change the parameter setting.

Related Topics

Control Channel Setup