How Do I Change the MS TX Level?

Last updated: December 2, 2008

There are two ways to change the MS TX Level:

• Change the level immediately
• Change the level during a handover

Both are explained below.

A. Change the MS TX level immediately.

1. Press the CALL SETUP key.
2. On the Call Parms menu (3 of 3) press the MS TX Level ( F8 ) key.
3. Set a new MS TX level and press the knob.
4. Press the Close Menu ( F6 ) key.

B. Change the MS TX level during a handover.

1. Press the CALL SETUP key.
2. Press the Handover Parameters ( F10 ) key.
3. Select and change the MS TX Level .
4. Press the Handover Execute ( F5 ) key to change the MS TX level, or press the Close Menu ( F6 ) key to leave the level unchanged.
5. Use the More key to check that the MS TX level has been changed on the Call Parms menu (3 of 3).