CALL:TRIGger

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

EGPRS LA

Revision: G.00.08 and above

Programming Example:

 
OUTPUT 714;"CALL:TRIG:INP:FRAM:ARM"
! Arm External Sync

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets/queries the External Sync to GSM frame number.

The command should be set before the CALL:TRIGger:INPut:FRAMe:ARM . See External Frame Synchronization

EGPRS LA

Setting

Query

*RST setting

Revision: G.00.08 and above

Programming Example:

 
OUTPUT 714;"CALL:TRIG:INP:FRAM:FNUM 5"
! Set the External Sync to GSM frame number to be 5

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Queries the External Sync status.

See External Frame Synchronization

EGPRS LA

Query

*RST setting

Revision: G.00.08 and above

Programming Example:

 
OUTPUT 714;"CALL:TRIG:INP:FRAM:STAT?"
! Queries the External Sync status

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

EGPRS LA

Revision: C.01 and above

EGPRS LA

Revision: A.01 and above

Programming Example:

 
OUTPUT 714;"CALL:TRIGGER:STATE:OFF"
! Disable all triggers

GSM TA

Enables a trigger signal on every frame except the Idle Frame.

EGPRS TA

GSM/GPRS LA

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:TRIGGER:FRAME:NIDLE:STATE 1"
! Enable the Every Frame except Idle trigger

GSM TA

Enables a trigger signal on every frame.

EGPRS TA

GSM/GPRS LA

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

Sets the symbol position on the Every Frame trigger.

EGPRS TA

GSM/GPRS LA

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

EGPRS LA

Requirements

Revision: C.01 and above

Programming Example:

OUTPUT 714;"CALL:TRIGger:FRAMe:SYNChronize"
! Send the neighbour cell synchronization trigger

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets the symbol offset prior to the 0'th frame for the neighbour cell synchronization trigger.

EGPRS LA

Setting

Query

*RST setting

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:TRIG:FRAM:SYNC:OFFS 5"
! Causes the synchronization trigger to occur 5 symbols before the first symbol of the 0'th frame

GSM TA

Sets the timeslot on the Every Frame trigger.

EGPRS TA

GSM/GPRS LA

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

Programming Example:

OUTPUT 714;"CALL:TRIGger:FRAMe:TSLot 5"
! Set the timeslot of the Every Frame trigger to 5

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Enables a trigger signal on every hyperframe.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:TRIGGER:HFRAME:STATE 1"
! Enable the hyperframe trigger

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets the frame offset on the hyperframe trigger.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:TRIGGER:HFRAME:FOFFSET 2000"
! Set the hyperframe trigger to occur at frame 2000

GSM TA

This command is not applicable to the GSM Test Application.

GPRS TA

This command is not applicable to the GPRS Test Application.

This command is not applicable to the EGPRS Test Application.

Enables a trigger signal on every PDTCH multiframe.

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:TRIGger:MFRame:PDTCh:STATe 1"
! Enable the multiframe trigger

Function

GSM TA

GPRS TA

This command is not applicable to the GPRS Test Application.

This command is not applicable to the EGPRS Test Application.

Sets the frame offset on the PDTCH multiframe trigger.

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:TRIGger:MFRame:PDTCh:FOFFset 25"
! Set the multiframe trigger to occur at frame 25

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Enables a trigger signal on every BCH multiframe.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:TRIGGER:MFRAME:BCHANNEL:STATE 1"
! Enables the BCH multiframe trigger

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets the frame offset on the BCH multiframe trigger.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:TRIGGER:MFRAME:BCHANNEL:FOFFSET 24"
! Sets the BCH multiframe trigger to occur on frame 24

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Enables a trigger signal on a Radio Block.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:TRIGGER:RBLOCK:PDTCH:STATE 1"
! Enables the Radio Block trigger

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets the frame to trigger on within the Radio Block.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:TRIGGER:RBLOCK:PDTCH:FOFFSET 2"
! Sets the Radio Block trigger to occur on frame 2 of each radio block

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Enables a trigger signal on the Packet Uplink Assignment message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:TRIGGER:PMESSAGE:PUASSIGNMENT:STATE 1"
! Enables the Packet Uplink Assignment Message trigger

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets the frame offset on the trigger for the Packet Uplink Assignment message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

Programming Example:

 
OUTPUT 714;"CALL:TRIGGER:PMESSAGE:PUASSIGNMENT:FOFFSET 10000"
! Sets the Packet Uplink Assignment Message trigger to occur on frame 10000.

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Enables the Expected DUT TX trigger signal on the Packet Uplink Assignment message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets the frame offset on the Expected DUT TX trigger for the Packet Uplink Assignment message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Enables a trigger signal on the Packet Downlink Assignment message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets the frame offset on the trigger for the Packet Downlink Assignment message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Enables the First DUT RX trigger signal on the Packet Downlink Assignment message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets the frame offset on the First DUT RX trigger for the Packet Downlink Assignment message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Enables a trigger signal on the Packet Timeslot Reconfigure message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets the frame offset on the trigger for the Packet Timeslot Reconfigure message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Enables the Expected DUT TX trigger signal on the Packet Timeslot Reconfigure message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets the frame offset on the Expected DUT TX trigger for the Packet Timeslot Reconfigure message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Enables a trigger signal on the Packet Power Control/Timing Advance message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets the frame offset on the trigger for the Packet Power Control/Timing Advance message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Enables a trigger signal on the Packet Immediate Assignment message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets the frame offset on the trigger for the Packet Immediate Assignment message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Enables the DUT TX trigger signal on the Packet Immediate Assignment message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets the frame offset on the DUT TX trigger for the Packet Immediate Assignment message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Enables the DUT RX trigger signal on the Packet Immediate Assignment message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets the frame offset on the DUT RX trigger for the Packet Immediate Assignment message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Enables a trigger signal on the Identity Request message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets the frame offset on the trigger for the Identity Request message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Enables a trigger signal on the Attach Accept message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets the frame offset on the trigger for the Attach Accept message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Enables a trigger signal on the Detach Request message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets the frame offset on the trigger for the Detach Request message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Enables a trigger signal on the PDP Context Activation Accept message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets the frame offset on the trigger for the PDP Context Activation Accept message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above

GSM TA

This command is not applicable to the GSM test application.

This command is not applicable to the EGPRS Test Application.

GSM/GPRS LA

Sets the frame offset on the trigger for the Request PDP Context Activation message.

EGPRS LA

Setting

Query

*RST setting

Requirements

Revision: C.01 and above