How to "ping" an IP address from the test set
Last updated: December 3, 2008
This section is only applicable to the lab applications and to mobile stations that have the capability to ping a device.
You can use the ping feature of the test set to:
Ping the DUT from the test set
-
Press the
Call Setup
key.
-
Select
Operating Mode
(
F1
) and set it to
Active Cell
.
-
Select
Data Conn Type
(
F2
) and set it to
Auto
.
-
Press the left
More
key to display the second page of the Control Menu.
-
Select
DUT PDP Setup
(
F2
).
-
Proess
DUT PDP Setup
(
F1
).
-
Enter the
DUT IP address
.
The DUT's IP address must be on the same subnet as the test set's IP Address.
-
Press
F6
(
Close Menu
) to close the DUT PDP Setup menu.
-
Press
F6
(
return
) to return to the second page of the
Control
Menu.
-
Select
Ping
(
F3
).
-
Select
Ping Setup
(
F1
) and verify that
Device to Ping
is set to
DUT
.
-
Initiate some type of data exchange with the mobile station. For example, access the internet from the mobile station's user interface.
-
Select
Start Ping
(
F3
).
Ping an alternate address from the test set
-
Press the
Call Setup
key.
-
Select
Operating Mode
(
F1
) and set it to
Active Cell
.
-
Select
Data Conn Type
(
F2
) and set it to
Auto
.
-
Press the
More
key to display the second page of the Control Menu.
-
Select
Ping (
F3
)
.
-
Select
Ping Setup(
F1
)
.
-
Set the
Alternate Ping Address
to your desired target IP address.
-
Set
Device to Ping
to
Alternate
.
-
Select
Start Ping(
F3
)
.
|
top
of page