Last updated: December 3, 2008
This section is only applicable to the lab applications.
If a PC with the WPA software has not yet connected with the test set, an error message will be generated. Exactly one PC running the WPA software can be connected to a test set at one time.
Protocol Logging
(
F1
).
Start Protocol Logging
(
F1
) to begin logging.
Active
. The WPA's traffic overview window begins displaying messages. When the messages start displaying and how many are displayed is determined by the trigger and filter setup in the WPA. Refer to the WPA on-line help for more information.
Logging
menu, press
Stop Protocol Logging
(
F1
).
Idle
.You can now view the protocol log on the Traffic Overview window of the WPA software (See Protocol Logging for more information about protocol logging).