8960 GSM/GPRS/EGPRS Online User's Guide

E1968A, E6701F, E6704A

Contents

Call Processing

Manual Operation

Protocol Logging

Troubleshooting

Downloadable Manual

CALL:PPRocedure:PMEasurement:MPRequest

Last updated: December 3, 2008

GPIB Command Conventions

CALL:PPRocedure:PMEasurement:MPRequest:MAData

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Includes or excludes the optional E-OTD Measurement Assistance Data element from the Measure Position Request component.
	EGPRS LA
Setting		INCLude\|EXCLude
Query		INCL\|EXCL
*RST setting		EXCL
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData INCL"

CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:BCHCarrier

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Sets the value of the BCCH Carrier field in the E-OTD Measurement Assistance Data element. This field indicates the absolute RF channel number of the BTS indicated by the [<n>] mnemonic, where n can range from 1 to 8. The E-OTD Measurement Assistance Data element is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:MAData command to have it included.
	EGPRS LA
Setting		Range: 0 to 1023 Resolution: 1
Query		Range: 0 to 1023 Resolution: 1
*RST setting		0
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS2:BCHCarrier 556"

CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:BSICode

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Sets the value of the BSIC field in the E-OTD Measurement Assistance Data element. This field indicates the BSIC the BTS indicated by the [<n>] mnemonic, where n can range from 1 to 8. The E-OTD Measurement Assistance Data element is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:MAData command to have it included.
	EGPRS LA
Setting		Range: 0 to 63 Resolution: 1
Query		Range: 0 to 63 Resolution: 1
*RST setting		0
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS2:BCICode 8"

CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:CASSistance

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Includes or excludes the optional Calculation Assistance Data fields from the E-OTD Reference BTS for Assistance Data element for the BTS indicated by the [<n>} mnemonic, where n can range from 1 to 8. You can set the value of these fields using the following commands: CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:CASSistance:FRTDiff CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:CASSistance:RNORth CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:CASSistance:REASt
	EGPRS LA
Setting		INCLude\|EXCLude
Query		INCL\|EXCL
*RST setting		EXCL
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS2:CASSistance INCL"

CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:CASSistance:FRTDiff

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Sets the value of the optional Fine RTD field in the E-OTD Measurement Assistance Data element. This field indicates the fine RTD value between the BTS indicated by the [<n>] mnemonic (where n can range from 1 to 8) and the reference BTS. This field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:CASSistance command to have it included.
	EGPRS LA
Setting		Range: 0 to 255 Resolution: 1 bit
Query		Range: 0 to 255 Resolution: 1 bit
*RST setting		0
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS2:CASSistance:FRTDiff 220"

CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:CASSistance:RALTitude

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Includes or excludes the optional Calculation Assistance Data Relative Altitude field from the E-OTD Reference BTS for Assistance Data element for the BTS indicated by the [<n>] mnemonic, where n can range from 1 to 8. You can set the value of this field using the CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:CASSistance:RALTitude:VALue command.
	EGPRS LA
Setting		INCLude\|EXCLude
Query		INCL\|EXCL
*RST setting		EXCL
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS2:CASSistance INCL"

CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:CASSistance:RALTitude:VALue

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Sets the value of the Relative Altitude field in the E-OTD Measurement Assistance Data element. This field indicates the altitude of the BTS indicated by the [<n>] mnemonic (where n can range from 1 to 8) relative to the reference BTS in meters. This field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:CASSistance:RALTitude command to have it included. or excludes the optional E-OTD Measurement Assistance Data element from the Measure Position Request component.
	EGPRS LA
Setting		Range: -4000 to 4000 Resolution: 1
Query		Range: -4000 to 4000 Resolution: 1
*RST setting		0
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS2:CASSistance:RALTitude:VALue 2000"

CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:CASSistance:REASt

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Sets the value of the optional Relative East field in the E-OTD Measurement Assistance Data element. This field indicates the distance between the BTS indicated by the [<n>] mnemonic (where n can range from 1 to 8) and the reference BTS in the east-west direction. This field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:CASSistance command to have it included.
	EGPRS LA
Setting		Range: -200000 to 200000 Resolution: 1
Query		Range: -200000 to 200000 Resolution: 1
*RST setting		0
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS2:CASSistance:REASt -200"

CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:CASSistance:RNORth

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Sets the value of the optional Relative North field in the E-OTD Measurement Assistance Data element. This field indicates the distance between the BTS indicated by the [<n>] mnemonic (where n can range from 1 to 8) and the reference BTS in the north-south direction. This field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:CASSistance command to have it included.
	EGPRS LA
Setting		Range: -200000 to 200000 Resolution: 1
Query		Range: -200000 to 200000 Resolution: 1
*RST setting		0
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS2:CASSistance:RNORth -22000"

CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:MOFFset

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Sets the value of the Multiframe Offset field in the E-OTD Measurement Assistance Data element. This field indicates the frame offset between the BTS indicated by the [<n>] mnemonic (where n can range from 1 to 8) and the reference BTS. The E-OTD Measurement Assistance Data element is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:MAData command to have it included.
	EGPRS LA
Setting		Range: 0 to 51 Resolution: 1
Query		Range: 0 to 51 Resolution: 1
*RST setting		0
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS2:MOFFset 30"

CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS:NUMBer

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Sets the value of the Number of BTS field in the E-OTD Measurement Assistance Data element. This field indicates how many BTS are included in this information element. The E-OTD Measurement Assistance Data element is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:MAData command to have it included.
	EGPRS LA
Setting		Range: 1 to 8 Resolution: 1
Query		Range: 1 to 8 Resolution: 1
*RST setting		1
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS:NUMBer 3"

CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:RRTDiff

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Sets the value of the Rough RTD field in the E-OTD Measurement Assistance Data element. This field indicates the rough RTD value between the BTS indicated by the [<n>] mnemonic (where n can range from 1 to 8) and the reference BTS. The E-OTD Measurement Assistance Data element is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:MAData command to have it included.
	EGPRS LA
Setting		Range: 0 to 1250 Resolution: 1 bit
Query		Range: 0 to 1250 Resolution: 1 bit
*RST setting		0
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS2:RRTDiff 120"

CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS[<n>]:TSSCheme

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Sets the value of the Time Slot Scheme field in the E-OTD Measurement Assistance Data element. This field indicates the type of transmission scheme used by the BTS indicated by the [<n>] mnemonic, where n can range from 1 to 8. The E-OTD Measurement Assistance Data element is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:MAData command to have it included.
	EGPRS LA
Setting		Range: 0 to 1 Resolution: 1 0: All timeslots are 156.25 bits long 1: Time slots 0 and 4 are 157 bits long, all other are 156 bits long
Query		Range: 0 to 1 Resolution: 1
*RST setting		1
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:MAData:BTS2:TSSCheme 0"

CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:ACCuracy

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Includes or excludes the optional Accuracy field from the Positioning Instructions element. You can set the value of this field using the CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:ACCuracy:VALue command.
	EGPRS LA
Setting		INCLude\|EXCLude
Query		INCL\|EXCL
*RST setting		EXCL
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:ACCuracy INCL"

CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:ACCuracy:VALue

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Sets the value of the Accuracy field in the Positioning Instructions element. This indicates the required accuracy of the latitude and longitude for the location estimate. This field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:ACCuracy command to have it included.
	EGPRS LA
Setting		Range: 0 to 127 Resolution: 1
Query		0 to 127
*RST setting		127
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:ACCuracy:VALue 55"

CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:ECHaracter

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Includes or excludes the optional Environment Characterization field from the Positioning Instructions element. You can set the value of this field using the CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:ECHaracter:VALue command.
	EGPRS LA
Setting		INCLude\|EXCLude
Query		INCL\|EXCL
*RST setting		EXCL
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:ECHaracter INCL"

CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:ECHaracter:VALue

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Sets the value of the Environment Characterization field in the Positioning Instructions element. This field provides the MS with information about expected multipath in the current area. This field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:ECHaracter command to have it included.
	EGPRS LA
Setting		Range: 0 to 3 0: Heavy multipath 1: Light multipath 2: Not Defined 3: Reserved
Query		0 to 3
*RST setting		0
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:ECHaracter:VALue 0"

CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:MSETs

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Sets the Multiple Sets field in the Positioning Instructions element. This indicates if the MS should send multiple E-OTD Measurement Information Sets.
	EGPRS LA
Setting		0\|1 0: Sending of multiple sets is allowed 1: Sending of multiple sets is not allowed
Query		0\|1
*RST setting		0
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:MSETs 1"

CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:MTYPe

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Sets the Method Type field in the Positioning Instructions element.
	EGPRS LA
Setting		Range: 0 to 3 0: MS assisted 1: MS based 2: MS based preferred, but MS assisted is allowed 3: MS assisted preferred, but MS based is allowed
Query		0 to 3
*RST setting		0
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:MTYPe 1"

CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:RTIMe

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Sets the Response Time field in the Positioning Instructions element. This indicates the desired time for the MS to respond to the RRLP message.
	EGPRS LA
Setting		Range: 0 to 7 The response time is 2N seconds, where N is the value of the Response Time field. Therefore, 0: 1 second 4: 16 seconds 1: 2 seconds 5: 32 seconds 2: 4 seconds 6: 64 seconds 3: 8 seconds 7: 128 seconds
Query		0 to 7
*RST setting		2
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:RTIMe 1"

CALL:PPRocedure:PMEasurement:MPRequest:RAData

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Includes or excludes the optional E-OTD Reference BTS for Assistance Data element from the Measure Position Request component.
	EGPRS LA
Setting		INCLude\|EXCLude
Query		INCL\|EXCL
*RST setting		EXCL
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:RAData INCL"

CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Includes or excludes the optional BTS Position field from the E-OTD Reference BTS for Assistance Data element. You can set the value of this field using the CALL:PPRocedure:PMEasurement:MPRequest:PINStruction:ECHaracter:VALue command.
	EGPRS LA
Setting		INCLude\|EXCLude
Query		INCL\|EXCL
*RST setting		EXCL
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition INCL"

CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition:ALTitude

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Sets the Degrees Altitude for the BTS Position field. The BTS Position field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition command to have it included.
	EGPRS LA
Setting		Range: 0 to 32767 Resolution: 1
Query		Range: 0 to 32767 Resolution: 1
*RST setting		0
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition:ALTitude 456"

CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition:ALTitude:DIRection

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Sets the Direction of Altitude for the BTS Position field. The BTS Position field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition command to have it included.
	EGPRS LA
Setting		ABOVe\|BELow
Query		ABOV\|BEL
*RST setting		ABOV
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition:ALTitude:DIRection BELow"

CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition:LATitude:DEGRees

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Sets the Degrees Latitude for the BTS Position field. The BTS Position field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition command to have it included.
	EGPRS LA
Setting		Range: 0 to 2147483647 Resolution: 1
Query		Range: 0 to 2147483647 Resolution: 1
*RST setting		0
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition:LATitude:DEGRees 4567131"

CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition:LATitude:SIGN

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Includes Sets the Direction of Latitude for the BTS Position field. The BTS Position field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition command to have it included. excludes the optional E-OTD Measurement Assistance Data element from the Measure Position Request component.
	EGPRS LA
Setting		NORTh\|SOUTh
Query		NORT\|SOUT
*RST setting		NORT
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition:LATitude:SIGN NORTh"

CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition:LONGitude:DEGRees

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Sets the Degrees Longitude for the BTS Position field. The BTS Position field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition command to have it included.
	EGPRS LA
Setting		Range: -2147483647 to 2147483647 Resolution: 1
Query		Range: -2147483647 to 2147483647 Resolution: 1
*RST setting		0
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition:LONGitude:DEGRees 4567131"

CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition:TYPe

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Sets the Type of Description for the BTS Position field. The type of description is either "Ellipsoid Point" or "Ellipsoid Point with Altitude". The BTS Position field is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition command to have it included.
	EGPRS LA
Setting		EPOint\|EPALitude EPOint: Ellipsoid Point EPALitude: Ellipsoid Point with Altitude
Query		EPO\|EPAL
*RST setting		EPO
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:RAData:BTSPosition:TYPe EPAL"

CALL:PPRocedure:PMEasurement:MPRequest:REL98|RELEASE98

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Includes or excludes the optional Release 98 Extension element from the Measure Position Request component. You can set the value of these fields using the following commands: CALL:PPRocedure:PMEasurement:MPRequest:REL98\|RELEASE98:BTS[<n>]:EOTDiff CALL:PPRocedure:PMEasurement:MPRequest:REL98\|RELEASE98:BTS[<n>]:EOTDiff:UNCertainty
	EGPRS LA
Setting		INCLude\|EXCLude
Query		INCL\|EXCL
*RST setting		EXCL
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:REL98 INCL"

CALL:PPRocedure:PMEasurement:MPRequest:REL98|RELEASE98:BTS[<n>]:EOTDiff

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Sets the value of the Expected OTD field in the Release 98 Extension element. This field indicates the OTD value that the MS is expected to measure between the BTS indicated by the [<n>] mnemonic and the reference BTS. The Release 98 Extension element is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:REL98\|RELEASE98 command to have it included.
	EGPRS LA
Setting		Range: 0 to 1250 Resolution: 1 bit
Query		Range: 0 to 1250 Resolution: 1 bit
*RST setting		0
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:REL98:BTS2:EOTDiff 1010"

CALL:PPRocedure:PMEasurement:MPRequest:REL98|RELEASE98:BTS[<n>]:EOTDiff:UNCertainty

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	EGPRS TA	This command is not applicable to the EGPRS Test Application.
	GSM/GPRS LA	Sets the value of the Uncertainty of Expected OTD field in the Release 98 Extension element. This field indicates the uncertainty in the Expected OTD value. The Release 98 Extension element is optional. Use the CALL:PPRocedure:PMEasurement:MPRequest:REL98\|RELEASE98 command to have it included.
	EGPRS LA
Setting		Range: 0 to 7 Resolution: 1
Query		Range: 0 to 7 Resolution: 1
*RST setting		0
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:REL98:BTS2:EOTDiff:UNCertainty 5"

CALL:PPRocedure:PMEasurement:MPRequest:SEND

Function	GSM TA	This command is not applicable to the GSM Test Application.
	GPRS TA	This command is not applicable to the GPRS Test Application.
	GSM/GPRS LA	Sends the Measure Position Request component in an RRLP message.
	EGPRS LA
Requirements	GSM/GPRS/ EGPRS LA	Revision: C.01 and above
Programming Example: OUTPUT 714;"CALL:PPRocedure:PMEasurement:MPRequest:SEND"