When this parameter is set to ON, the test set will indicate the supporting of the packet SI/PSI Status message in the SI13 message (on BCCH) or PSI1 message (on PBCCH). The mobile can request the specific SI/PSI messages to be transferred from the test set when working in the Packet Transfer state; Upon receiving the SI/PSI request messages the test set provides the requested broadcast information messages over the available PACCH associated with an active TBF between the mobile and the test set.
Note: The Operating Mode must be set to Cell Off before setting this parameter. See CALL:OPERating for more details.
|Requirements||GSM/GPRS/ EGPRS LA|