CALL:DTMode

Last updated: December 3, 2008

Function	GSM TA	This command is not applicable to the GSM Test Applications.
	GPRS TA	This command is not applicable to the GPRS Test Applications.
	EGPRS TA	This command is not applicable to the EGPRS Test Applications.
	GSM/GPRS LA	This command sets/queries the state of the Dual Transfer Mode feature. See DTM Enable for more information. Note: The Operating Mode must be set to Cell Off before setting this parameter. See CALL:OPERating for more details.
	EGPRS LA
Setting		Range: 1\|ON\|0\|OFF
Query		Range: 0\|1
*RST Setting		1\|ON
Requirements	GSM/GPRS/ EGPRS LA	Revision: E.00.12 and above
Programming Example OUTPUT 714;"CALL:CELL:DTMode ON" ! Enables Dual Transfer Mode.

Function	GSM TA	This command is not applicable to the GSM Test Applications.
	GPRS TA	This command is not applicable to the GPRS Test Applications.
	EGPRS TA	This command is not applicable to the EGPRS Test Applications.
	GSM/GPRS LA	This command sets/queries the state of the Enhanced Dual Transfer Mode feature. See Enhanced DTM Enable for more information. Note: The Operating Mode must be set to Cell Off before setting this parameter. See CALL:OPERating for more details.
	EGPRS LA
Setting		Range: 1\|ON\|0\|OFF
Query		Range: 0\|1
*RST Setting		0\|OFF
Requirements	GSM/GPRS/ EGPRS LA	Revision: E.00.12 and above
Programming Example OUTPUT 714;"CALL:CELL:DTMode:ENHanced ON" ! Enables Enhanced Dual Transfer Mode.