GPIB Commands

Last updated: December 3, 2008

This page provides links to all of the test set's GPIB subsystems. Select a subsystem link below for a description of the subsystem and links to all of the GPIB commands within that subsystem.

If you have trouble finding the information you need below, use the search field at the top of this page to search the contents of this guide.

GPIB Command Conventions

GPIB Command Conventions to understand how GPIB commands are represented.

Call and Connection Processing

CALL Subsystem to control the mobile and setup and control the cell.

Measurement Control

SETup Subsystem to configure a measurement.
INITiate Subsystem or READ? Subsystem to start a measurement.
FETCh? Subsystem or READ? Subsystem to get measurement results.
CALCulate Subsystem to perform data processing on measurement results
ABORt Subsystem to stop a measurement.

Status

STATus Subsystem Description to communicate Test Set status.

IEEE 488.2 Common Commands

IEEE 488.2 Common Commands

Instrument Selection

AFGenerator Subsystem
RFANalyzer Subsystem (not controlled as an instrument)
RFGenerator Subsystem

Test Set Configuration

GPIB Command Change Summary for GSM and GPRS

E1968A GSM/GPRS GPIB COMMAND CHANGES to see a summary of E1960A GSM commands and E1964A GPRS commands that were deleted, changed, or added for the combined E1968A GSM/GPRS Mobile Test Application. Describes functionality added to both technologies and new methods employed for various measurements in the E1968A.

Listing of Commands

For a complete list of the GPIB commands in this application: GSM/GPRS/EGPRS Listing of Commands