Last updated: 2014-11-28
When an error message is displayed, it is also logged in the error message log. This log is only accessible manually; it is not available through GPIB.
All errors and events that are generated are displayed in the error message log. When the log is full a new message is sent to the log and the oldest message is removed from the log. The log is cleared when the test set powers up or when you press F10 (Clear Error Message Log).
For all the possible error messages with the error number, see Troubleshooting.
Manual Operation: The error message log can be displayed by pressing the F7 menu key from the SYSTEM CONFIG screen. Next Page and Previous Page controls are provided.