CALL[:CELL]:CEDChannel

GPIB Command Conventions

CALL[:CELL]:CEDChannel:AETBackoff

Function

Sets/queries the Additional E-DCH Transmission Back Off.

This setting can only be changed when Call or Data Status is Idle.

Setting

Range: 0 -15 (TTI)

Increment: 1

Query

Range:  0 -15 (TTI)

*RST Setting

  5
Requirements

Lab Application Revision: J.01.00 and above

Programming Example

OUTPUT 714;"CALL:CEDChannel:AETBackoff 5" !

CALL[:CELL]:CEDChannel:AICHannel[:SLEVel]

Function

The setting form of this command performs two functions: (1) sets the CALL[:CELL]:CEDChannel:AICHannel:LEVel and (2) sets the CALL[:CELL]:CEDChannel:AICHannel:STATe to on.

See Common E-DCH AICH Level.

The query form of this command returns the CALL[:CELL]:CEDChannel:AICHannel:LEVel.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

 -10
Requirements

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CEDChannel:AICHannel[:SLEVel] -10" !

CALL[:CELL]:CEDChannel:AICHannel:LEVel

Function

Sets/queries the Common E-DCH AICH Power Offset.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

 -10
Requirements

Lab Application Revision: J.01.00 and above

Programming Example

OUTPUT 714;"CALL:CEDChannel:AICHannel:LEVel -10" !

CALL[:CELL]:CEDChannel:AICHannel:STATe

Function

Sets/queries the Common E-DCH AICH State.

Setting

Range: 1|ON|0|OFF

Query

Range: 1|0

*RST Setting

 1(ON)
Requirements

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CEDChannel:AICHannel:STATe ON" !

CALL[:CELL]:CEDChannel:CCCHannel:RALLocation:MAXimum

Function

Sets/queries the Max Resource Allocation for CCCH.

This setting can only be changed when Call or Data Status is Idle.

Setting

Range: 8,12,16,20,24,32,40,80 (TTI)

Query

Range: 8,12,16,20,24,32,40,80 (TTI)

*RST Setting

 16
Requirements

Lab Application Revision: J.01.00 and above

Programming Example

OUTPUT 714;"CALL:CEDChannel:CCCHannel:RALLocation:MAXimum 16" !

CALL[:CELL]:CEDChannel:CCPChannel:PRIMary[:SLEVel]

Function

The setting form of this command performs two functions: (1) sets the CALL[:CELL]:CEDChannel:CCPChannel:PRIMary:LEVel and (2) sets the CALL[:CELL]:CEDChannel:CCPChannel:PRIMary:STATe to on.

See Common E-DCH P-CCPCH/SCH Level.

The query form of this command returns the CALL[:CELL]:CEDChannel:CCPChannel:PRIMary:LEVel.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

 -12
Requirements

Lab Application Revision: J.01.00 and above

Programming Example

OUTPUT 714;"CALL:CEDChannel:CCPChannel:PRIMary[:SLEVel] -12" !

CALL[:CELL]:CEDChannel:CCPChannel:PRIMary:LEVel

Function

Sets/queries the Common E-DCH P-CCPCH/SCH Power Offset.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

 -12
Requirements

Lab Application Revision: J.01.00 and above

Programming Example

OUTPUT 714;"CALL:CEDChannel:CCPChannel:PRIMary:LEVel -12" !

CALL[:CELL]:CEDChannel:CCPChannel:PRIMary:STATe

Function

Sets/queries the Common E-DCH P-CCPCH/SCH State.

Setting

Range: 1|ON|0|OFF

Query

Range: 1|0

*RST Setting

 1 (on)
Requirements

Lab Application Revision: J.01.00 and above

Programming Example

OUTPUT 714;"CALL:CEDChannel:CCPChannel:PRIMary:STATe ON" !'

CALL[:CELL]:CEDChannel:CCPChannel:SECondary[:SLEVel]

Function

The setting form of this command performs two functions: (1) sets the CALL[:CELL]:CEDChannel:CCPChannel:SECondary:LEVel and (2) sets the CALL[:CELL]:CEDChannel:CCPChannel:SECondary:STATe to on.

See Common E-DCH S-CCPCH Level.

The query form of this command returns the CALL[:CELL]:CEDChannel:CCPChannel:SECondary:LEVel.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

 -10.3
Requirements

Lab Application Revision: J.01.00 and above

Programming Example

OUTPUT 714;"CALL:CEDChannel:CCPChannel:SECondary[:SLEVel] -10.3" !

CALL[:CELL]:CEDChannel:CCPChannel:SECondary:LEVel

Function

Sets/queries the Common E-DCH S-CCPCH Power Offset.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

 -10.3
Requirements

Lab Application Revision: J.01.00 and above

Programming Example

OUTPUT 714;"CALL:CEDChannel:CCPChannel:SECondary:LEVel -10.3" !

CALL[:CELL]:CEDChannel:CCPChannel:SECondary:STATe

Function

Sets/queries the Common E-DCH S-CCPCH State.

Setting

Range: 1|ON|0|OFF

Query

Range: 1|0

*RST Setting

 1 (ON)
Requirements

Lab Application Revision: J.01.00 and above

Programming Example

OUTPUT 714;"CALL:CEDChannel:CCPChannel:SECondary:STATe ON" !'

CALL[:CELL]:CEDChannel:CPIChannel[:SLEVel]

Function

The setting form of this command performs two functions: (1) sets the CALL[:CELL]:CEDChannel:CPIChannel:LEVel and (2) sets the CALL[:CELL]:CEDChannel:CPIChannel:STATe to on.

See Common E-DCH CPICH Level.

The query form of this command returns the CALL[:CELL]:CEDChannel:CPIChannel:LEVel.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

 -10
Requirements

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CEDChannel:CPIChannel[:SLEVel] -10" !

CALL[:CELL]:CEDChannel:CPIChannel:LEVel

Function

Sets/queries the Common E-DCH P-CPICH Power Offset.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

 -10
Requirements

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CEDChannel:CPIChannel:LEVel -10" !

CALL[:CELL]:CEDChannel:CPIChannel:STATe

Function

Sets/queries the Common E-DCH P-CPICH State.

Setting

Range: 1|ON|0|OFF

Query

Range: 1|0

*RST Setting

 1 (ON)
Requirements

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CEDChannel:CPIChannel:STATe ON" !

CALL[:CELL]:CEDChannel:CRPPeriod:MAXimum

Function

Sets/queries the Max Period for Collision Resolution Phase.

This setting can only be changed when Call or Data Status is Idle.

Setting

Range: 8 - 24 (TTI)

Query

Range: 8 - 24 (TTI)

*RST Setting

  15
Requirements

Lab Application Revision: J.01.00 and above

Programming Example

OUTPUT 714;"CALL:CEDChannel:CRPPeriod:MAXimum 15" !

CALL[:CELL]:CEDChannel:EAGChannel[:SLEVel]

Function

The setting form of this command performs two functions: (1) sets the CALL[:CELL]:CEDChannel:EAGChannel:LEVel and (2) sets the CALL[:CELL]:CEDChannel:EAGChannel:STATe to on.

See Common E-DCH E-AGCH  Level.

The query form of this command returns the CALL[:CELL]:CEDChannel:EAGChannel:LEVel.

Setting

Range: -40.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

 -20
Requirements

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CEDChannel:EAGChannel[:SLEVel] -20" !

CALL[:CELL]:CEDChannel:EAGChannel:LEVel

Function

Sets/queries the Common E-DCH E-AGCH Power Offset.

Setting

Range: -40.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

 -20
Requirements

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CEDChannel:EAGChannel:LEVel -20" !

CALL[:CELL]:CEDChannel:EAGChannel:STATe

Function

Sets/queries the Common E-DCH E-AGCH State.

Setting

Range: 1|ON|0|OFF

Query

Range: 1|0

*RST Setting

 1 (ON)
Requirements

Lab Application Revision: J.01.00 and above

Programming Example

OUTPUT 714;"CALL:CEDChannel:EAGChannel:STATe ON" !

CALL[:CELL]:CEDChannel:EHIChannel[:SLEVel]

Function

The setting form of this command performs two functions: (1) sets the CALL[:CELL]:CEDChannel:EHIChannel:LEVel and (2) sets the CALL[:CELL]:CEDChannel:EHIChannel:STATe to on.

See Common E-DCH E-HICH  Level.

The query form of this command returns the CALL[:CELL]:CEDChannel:EHIChannel:LEVel.

Setting

Range: -40.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

 -20
Requirements

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CEDChannel:EHIChannel[:SLEVel] -20" !

CALL[:CELL]:CEDChannel:EHIChannel:LEVel

Function

Sets/queries the Common E-DCH E-HICH Power Offset.

Setting

Range: -40.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

 -20
Requirements

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CEDChannel:EHIChannel:LEVel -20" !

CALL[:CELL]:CEDChannel:EHIChannel:STATe

Function

Sets/queries the Common E-DCH E-HICH State.

Setting

Range: 1|ON|0|OFF

Query

Range: 1|0

*RST Setting

 1 (ON)
Requirements

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CEDChannel:EHIChannel:STATe ON" !

CALL[:CELL]:CEDChannel:FDPChannel[:SLEVel]

Function

The setting form of this command performs two functions: (1) sets the CALL[:CELL]:CEDChannel:FDPChannel:LEVel and (2) sets the CALL[:CELL]:CEDChannel:FDPChannel:STATe to on.

See Common E-DCH F-DPCH Level.

The query form of this command returns the CALL[:CELL]:CEDChannel:FDPChannel:LEVel.

Setting

Range: -30.000 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

 -10
Requirements

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CEDChannel:FDPChannel[:SLEVel] -10" !

CALL[:CELL]:CEDChannel:FDPChannel:LEVel

Function

Sets/queries the Common E-DCH F-DPCH Power Offset.

Setting

Range: -30.000 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

 -10
Requirements

Lab Application Revision: J.01.00 and above

Programming Example

OUTPUT 714;"CALL:CEDChannel:FDPChannel:LEVel -10" !

CALL[:CELL]:CEDChannel:FDPChannel:STATe

Function

Sets/queries the Common E-DCH F-DPCH State.

Setting

Range: 1|ON|0|OFF

Query

Range: 1|0

*RST Setting

 1 (ON)
Requirements

Lab Application Revision: J.01.00 and above

Programming Example

OUTPUT 714;"CALL:CEDChannel:FDPChannel:STATe ON" !

CALL[:CELL]:CEDChannel:HSPDschannel[:SLEVel]

Function

The setting form of this command performs two functions: (1) sets the CALL[:CELL]:CEDChannel:HSPDschannel:LEVel and (2) sets the CALL[:CELL]:CEDChannel:HSPDschannel:STATe to on.

See Common E-DCH HS-PDSCHs Level(Sum).

The query form of this command returns the CALL[:CELL]:CEDChannel:HSPDschannel:LEVel.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

 -5
Requirements

Lab Application Revision: J.01.00 and above

Programming Example

OUTPUT 714;"CALL:CEDChannel:HSPDschannel[:SLEVel] -5" !

CALL[:CELL]:CEDChannel:HSPDschannel:LEVel

Function

Sets/queries the Common E-DCH HS-PDSCH Power Offset.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

 -5
Requirements

Lab Application Revision: J.01.00 and above

Programming Example

OUTPUT 714;"CALL:CEDChannel:HSPDschannel:LEVel -5" !

CALL[:CELL]:CEDChannel:HSPDschannel:STATe

Function

Sets/queries the Common E-DCH HS-PDSCH State.

Setting

Range: 1|ON|0|OFF

Query

Range: 1|0

*RST Setting

 1 (ON)
Requirements

Lab Application Revision: J.01.00 and above

Programming Example

OUTPUT 714;"CALL:CEDChannel:HSPDschannel:STATe ON" !

CALL[:CELL]:CEDChannel:HSSCchannel[1][:SLEVel]

Function

The setting form of this command performs two functions: (1) sets the CALL[:CELL]:CEDChannel:HSSCchannel[1]:LEVel and (2) sets the CALL[:CELL]:CEDChannel:HSSCchannel[1]:STATe to on.

See Common E-DCH HS-SCCH 1 Level.

The query form of this command returns the CALL[:CELL]:CEDChannel:HSSCchannel[1]|2|3|4:LEVel.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

 -10
Requirements

Lab Application Revision: J.01.00 and above

Programming Example

OUTPUT 714;"CALL:CEDChannel:HSSCchannel[1][:SLEVel] -10" !

CALL[:CELL]:CEDChannel:HSSCchannel[1]:LEVel

Function

Sets/queries the Common E-DCH HS-SCCH 1 Power Offset.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

 -10
Requirements

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CEDChannel:HSSCchannel[1]:LEVel -10" !

CALL[:CELL]:CEDChannel:HSSCchannel[1]:STATe

Function

Sets/queries the Common E-DCH HS-SCCH 1 State.

Setting

Range: 1|ON|0|OFF

Query

Range: 1|0

*RST Setting

 1 (ON)
Requirements

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CEDChannel:HSSCchannel[1]:STATe ON" !

CALL[:CELL]:CEDChannel:HSSCchannel2|3|4[:SLEVel]

Function

The setting form of this command performs two functions: (1) sets the CALL[:CELL]:CEDChannel:HSSCchannel2|3|4:LEVel and (2) sets the CALL[:CELL]:CEDChannel:HSSCchannel2|3|4:STATe to on.

See Common E-DCH HS-SCCH 2|3|4 Level.

The query form of this command returns the CALL[:CELL]:CEDChannel:HSSCchannel2|3|4:LEVel.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

 -15
Requirements

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CEDChannel:HSSCchannel2[:SLEVel] -15" !

CALL[:CELL]:CEDChannel:HSSCchannel2|3|4:LEVel

Function

Sets/queries the Common E-DCH HS-SCCH 2|3|4 Power Offset.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

 -15
Requirements

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CEDChannel:HSSCchannel2:LEVel -15" !

CALL[:CELL]:CEDChannel:HSSCchannel2|3|4:STATe

Function

Sets/queries the Common E-DCH HS-SCCH 2|3|4 State.

Setting

Range: 1|ON|0|OFF

Query

Range: 1|0

*RST Setting

 0 (OFF)
Requirements

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CEDChannel:HSSCchannel2:STATe ON" !

CALL[:CELL]:CEDChannel:PICHannel[:SLEVel]

Function

The setting form of this command performs two functions: (1) sets the CALL[:CELL]:CEDChannel:PICHannel:LEVel and (2) sets the CALL[:CELL]:CEDChannel:PICHannel:STATe to on.

See Common E-DCH PICH Level.

The query form of this command returns the CALL[:CELL]:CEDChannel:PICHannel:LEVel.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

 -15
Requirements

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CEDChannel:PICHannel[:SLEVel] -15" !

CALL[:CELL]:CEDChannel:PICHannel:LEVel

Function

Sets/queries the Common E-DCH PICH Power Offset.

Setting

Range: -20.00 to 0

Resolution: 0.01

Increment: 0.1

Units: dB

Query

same with the setting

*RST Setting

 -15
Requirements

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CEDChannel:PICHannel:LEVel -15" !

CALL[:CELL]:CEDChannel:PICHannel:STATe

Function

Sets/queries the Common E-DCH PICH State.

Setting

Range: 1|ON|0|OFF

Query

Range: 1|0

*RST Setting

 1 (ON)
Requirements

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CEDChannel:PICHannel:STATe ON" !

CALL[:CELL]:CEDChannel:SOFFset

Function

Sets/queries the Soffset.

This setting can only be changed when call status or data status is Idle.

Setting

Range: 0 to 9

Query

Range: 0 to 9

*RST Setting

  0
Requirements

Lab Application Revision: J.01.00 and above.

Programming Example

OUTPUT 714;"CALL:CEDChannel:SOFFset 0" !

CALL[:CELL]:CEDChannel:STATe

Function

Sets/queries the Common E-DCH State .

Setting

Range: 1|ON|0|OFF

Query

Range:  1 | 0

*RST Setting

  0 (OFF)
Requirements

Lab Application Revision: J.01.00 and above

Programming Example

OUTPUT 714;"CALL:CEDChannel:STATe ON" !