Cell Off Operating Mode
Last updated: January 15, 2009
Cell Off operating mode and Active Cell operating mode share the same settings. However, Cell Off mode allows you to change the parameters that cannot be changed during Active Cell operation but used for call processing, such as downlink and uplink channel number (UARFCN), reference measurement channel configuration (Channel Type), signalling radio bearer configuration, etc.
Use Cell Off operating mode to set up those downlink and uplink parameters before establishing a connection to the UE (mobile station). After making the settings, switch to Active Cell operating mode to begin generating the downlink signal. Use
CALL:OPERating
to select operating modes.
No signal is generated by the test set during Cell Off operation, regardless of the Cell Power setting. All settings are deferred until the Active Cell operating mode or FDD Test operating mode is used.
|
top
of page