How Do I Configure the AUDIO OUT Port?
Last updated: January 15, 2009
A. Select a signal to output to the AUDIO OUT port.
-
Press the
SYSTEM CONFIG
key.
-
Press the
More
key on the left side of the display for additional system parameters.
-
Press the
Audio Out Port
(
F1
) key.
-
Turn the knob to highlight a selection and then press the knob.
Selection of FM Demod signal routed to the front-panel AUDIO OUT port is useful only in AMPS system. There will be no guaranteed performance for the signal present at the Audio Out Port when FM Demod is selected for output.
B. Set FM Demod signal.
When FM Demod signal is selected for output to the front-panel AUDIO OUT port, a bandpass filter, expander circuit, and de-emphasis circuit can be individually inserted or bypassed in the FM Demod signal path.
-
Press the
SYSTEM CONFIG
key.
-
Press the
More
key.
-
Press the
FM Demod Setup
(
F2
) key.
-
Turn the knob to highlight a selection and then press the knob.
-
Enter a value or selection and press the knob.
-
Press the
Close Menu
(
F6
) key.
|
top
of page