How Do I Change Generator Information?
Last updated: January 15, 2009
A. Set Parameters Requiring Cell Off Operating Mode: Downlink Channel Codes and Downlink Channel Levels.
-
Press the
CALL SETUP
key.
-
Press
Operating Mode
(
F1
) and select
Cell Off
.
-
Press the left
More
key until you reach the
Call Control
(
2 of 5
) menu.
-
Select
Generator Info
(
F3
).
-
Select
Downlink Channel Codes
(
F2
) and set the channel codes.
-
Select
Downlink Channel Levels
(
F3
) and set the power levels for the downlink channels.
-
Press the
Close Menu
(
F6
) key.
-
Select
Return
(
F6
).
-
Change the operating mode back to
Active Cell
if desired.
B. Change Parameters Allowed in Active Cell Mode: Connected Downlink Channel Levels and AWGN Power.
-
Press the
CALL SETUP
key.
-
Press the left
More
key until you reach the
Call Control
(
2 of 5
) menu.
-
Press
Generator Info
(
F3
).
-
Press the
Connected DL Channel Levels
(
F4
) key, and change the power levels for the downlink channels while a call is connected in order to test the UE's response.
-
Press the
AWGN Power
(
F5
) key to set AWGN power as needed.
-
Press
Return
(
F6
).
|
top
of page