How Do I Change Uplink Parameters?

Last updated: January 15, 2009

1. Press the CALL SETUP key.
2. Press Operating Mode ( F1 ) and select Cell Off .
3. Press More key on the left to go to Call Control ( 2 of 5 ).
4. Press the Uplink Parameters ( F 4 ) to access the settings for uplink PRACH and DPCH channels.
5. Turn the knob to highlight a parameter and then press the knob.
6. Enter a value or selection as desired and press the knob.
7. Press Close Menu ( F6 ).
8. Change the operating mode back to Active Cell if needed.