CALL:CHANnel

Function

Sets/queries the downlink channel number ( DL Channel ).

This setting cannot be changed while in the active cell operating mode. Attempting to change this setting while in this mode results in an error issued and the test set will reject the change. Use the cell off operating mode when changing this value. See CALL:OPERating to select operating modes.

If the Uplink Channel and DL Channel settings have an uplink/downlink offset of less than 30 MHz, the warning message "+217, Performance not specified for UL/DL frequency offset < 30 MHz" will be issued. The setting will be used as entered if not changed by the user.

Setting

Range:

• 412, 437, 462, 487, 512, 537, 562, 587, 612, 637, 662, 687
• 1007, 1012, 1032, 1037, 1062, 1087
• 1162 - 1513, resolution = 1
• 1537 - 1738, resolution = 1
• 1887, 1912, 1937, 1962, 1987, 2012, 2037, 2062, 2087
• 2237 - 2563, resolution = 1
• 2587, 2612, 2637, 2662, 2687, 2712, 2737, 2762, 2787, 2812, 2837, 2862, 2887, 2912
• 2937 - 3088, resolution = 1
• 3112 - 3388, resolution = 1
• 3412, 3437, 3462, 3487, 3512, 3537, 3562, 3587, 3612, 3637, 3662, 3687
• 3837 - 3903, resolution = 1
• 3927, 3932, 3957, 3962, 3987, 3992
• 4017 - 4043, resolution = 1
• 4067, 4092
• 4117 - 4143, resolution = 1
• 4167, 4192
• 4357 - 4458, resolution = 1
• 9237 - 9387, resolution = 1
• 9662 - 9938, resolution = 1
• 10562 - 10838, resolution = 1

Query

*RST Setting

10700

Requirements

Test Application Revision: A.02 and above

Lab Application Revision: A.01 and above

Test Application Revision A.05.28 and Lab Application Revision B.01.29, added 1037 - 1062.

Test Application Revision A.08 and Lab Application Revision C.03, changed channel ranges to match 3GPP TS 25.101 v6.7.0 (previously, channels supported were: 412-687, 1037-1062, 4320-4495, 4600-4825, 9000-9425, 9625-9975, and 10,525-10,875 -- resolution = 1).

Test Application Revision A.09 and Lab Application Revisions C.04 and D.00, changed channel ranges to match 3GPP TS 25.101 v7.2.0 (previously channels supported were: 412, 437, 462, 487, 512, 537, 562, 587, 612, 637, 662, 687, 1007, 1012, 1032, 1037, 1062, 1087, 1462, 1487, 1512, 1537, 1562, 1587, 1612, 1637, 1662, 4357-4458 -- resolution = 1, 9037-9388 -- resolution = 1, 9662-9938 -- resolution = 1, and 10562-10838 -- resolution = 1).

Test Application Revision A.10 and Lab Application Revision D.01, added 2237 - 2563, 2587, 2612, 2637, 2662, 2687, 2712, 2737, 2762, 2787, 2812, 2837, 2862, 2887, 2912

Test Application Revision A.11 and Lab Application Revisions D.02 and E.00, added 3112 to 3388, 3412, 3437, 3462, 3487, 3512, 3537, 3562, 3587, 3612, 3637, 3662, 3687

Test Application Revision A.14 and Lab Application Revision F.00, added 3837 - 3903, 3927, 3932, 3957, 3962, 3987, 3992, 4017 - 4043, 4067, 4092, 4117 - 4143, 4167, 4192

Programming Example

 
OUTPUT 714;"CALL:CHANnel 10705"
! Sets the downlink channel number to 10705.