CALL:DTCHannel
Last updated: January 15, 2009
GPIB Command Conventions
CALL:DTCHannel:DATA
|
Function
|
Sets/queries the downlink dedicated traffic channel's data type. See
DL DTCH Data
.
|
|
Setting
|
Range: INCRement|ONES|PRBS9|PRBS15|PRBS20|PRBS23|ZERos
|
|
Query
|
Range: INCR|ONES|PRBS9|PRBS15|PRBS20|PRBS23|ZER
|
|
*RST Setting
|
PRBS15 |
|
Requirements
|
Test Application Revision: A.01 and above
Test Application Revision A.04 added INCrement
Lab Application Revision: A.01 and above
Lab Application Revision A.02 added INCrement
Test Application Revision A.14 and Lab Application Revision F.00, added PRBS20 and PRBS23
|
|
Programming Example
OUTPUT 714;"CALL:DTCHANNEL:DATA ZER"
! Sets the DTCH data pattern to continuous zeroes.
|
CALL:DTCHannel:BLER:REPorting:INTerval
|
Function
|
Sets/queries the observation period for UE reported DTCH BLER measurements (see
DTCH BLER (Block Error Ratio) Report
for details).
It is in the unit of millisecond. This setting is only useful after a Measurement Request (see
CALL:MS:REPorted:MEASurement:REQuest
).
|
|
Setting
|
Range: (INT250 = 250 ms)
INT250|INT500|INT1000|INT2000|INT3000|INT4000|INT6000|INT8000
|INT12000|INT16000|INT20000|INT24000|INT28000|INT32000|INT64000
|
|
Query
|
Range: same as setting
|
|
*RST Setting
|
INT250 |
|
Requirements
|
Test Application Revision: A.03 and above.
Lab Application Revision: A.01 and above.
|
|
Programming Example
OUTPUT 714;"CALL:DTCHannel:BLER:REPorting:INTerval INT1000"
! Sets the DTCH BLER observation period to 1000 miliseconds.
|
|
top
of page