CALL:HSDPa

Function

Sets/queries the HSDPA Cell Indicator .

This setting can only be changed when call status is Idle . If BCCH Update Page is set to Auto and you change this setting while your UE is camped to the test set, the test set performs a Broadcast Channel (BCCH) Update Procedure (SIB Contents) . If BCCH Update Page is set to Inhibit (the default value) and you change this setting while your UE is camped to the test set, you must force your UE to re-read the BCCH to observe the change (see BCCH Update Page for more details).

Setting

Range: CAPable|CNINdicated

Query

Range: CAP|CNIN

*RST Setting

Requirements

Test Application Revision A.12 and above, with the required feature license.

Programming Example

 
OUTPUT 714;"CALL:HSDPa:CINDicator CAPable" 
! Sets HSDPA Cell Indicator to Capable.

Function

Setting

Range: 0 to 9

Resolution: 1

Query

*RST Setting

Requirements

Test Application Revision: A.15 and above

Lab Application Revision: F.01 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:FDPChannel:SLOT:FORMat 0"
! Sets HSDPA F-DPCH Slot Format to 0.

Function

Sets/queries Primary H-RNTI (Hex) .

This parameter can only be set when call status is Idle .

Setting

Range: 0 to FFFF

(1 to 4 characters from the set 0123456789AaBbCcDdEeFf)

Query

Range: "0000" to "FFFF"

(The return string is always 4 characters from the set 0123456789ABCDEF, enclosed by double quotes.)

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:HRNTi 'EEEE'" 
! Sets Primary H-RNTI (Hex) to EEEE.

Function

Sets/queries Alternate H-RNTI (Hex) .

This parameter can only be set when call status is Idle .

Setting

Range: 0 to FFFF

(1 to 4 characters from the set 0123456789AaBbCcDdEeFf)

Query

Range: "0000" to "FFFF"

(The return string is always 4 characters from the set 0123456789ABCDEF, enclosed by double quotes.)

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:HRNTi:ALTernate '2222'" 
! Sets Alternate H-RNTI (Hex) to 2222.

Function

Sets/queries the MAC-ehs Segmentation Strategy .

Setting

Range: STANdard|MINimum

Query

*RST Setting

Requirements

Lab Application Revision F.00 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:MACEHS:SEGMentation STANdard"
! Sets the segmentation strategy to Standard.

Function

Sets/queries the Number of Transmissions .

Setting

Range: 1 to 8

Query

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:MACHs:NTRans 2"
! Sets the Number of Transmissions to 2.

Function

Sets/queries the RV Sequence .

Note: how many of the RV parameters in the sequence are used is determined by the Number of Transmissions setting (see CALL:HSDPa:MACHs:NTRans ). The RV parameters at the end of the list are not used if Number of Transmissions is less than 8.

Setting

Range: Comma separated list of 1 to 8 characters from the set 01234567.

Query

Range: Comma separated list of 8 characters from the set 01234567, enclosed by double quotes (if you enter fewer than 8 characters, the query result will fill the remaining characters with zeros).

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:MACHs:RVSequence '0,2,7,4,3,1'"
! Sets the RV Sequence to 0,2,7,4,3,1,0,0.

Function

Sets/queries the statDTX Reception Behavior .

Setting

Range: ACK|NACK|SDTX

Query

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:MACHs:SDTX:RBEHavior ACK"
! Sets the statDTX Reception Behavior to Handle as ACK.

Function

Sets/queries MAC-hs T1 .

This parameter can only be set when call status is Idle .

Setting

Range: 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 120, 140, 160, 200, 300, 400 ms

Note, the default unit for this command is seconds. If you enter a value without a unit (S|MS|US|NS), the test set assumes the value you've entered is in seconds.

Query

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:MACHs:T1 10 MS"
! Sets MAC-hs T1 to 10 ms.

Function

Sets/queries the MAC-hs Window Size .

This parameter can only be set when call status is Idle .

Setting

Range: PDU4|PDU6|PDU8|PDU12|PDU16|PDU24|PDU32

Query

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:MACHs:WSIZe PDU12"
! Sets the MAC-hs Window Size to 12.

Function

Sets/queries the Meas Pow Offset .

This parameter can only be set either while the call status is Idle .

This setting only applies when CALL:HSDPa:MPOWer:OFFSet:CONTrol:AUTO is set to OFF (manual).

Alternatively, you can use CALL:STATus:MPOWer:OFFSet:SIGNaled? to query the Last Signaled Measurement Power Offset.

Setting

Range: -6.0 to +13.0 dB

Resolution: 0.1

Query

Range: -6.0 to +13.0 dB, 9.91E+37

Resolution: 0.5

*RST Setting

Requirements

Lab Application Revision E.00.16 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:MPOWer -6"
! Sets the Measurement Power Offset to -6 dB.

Function

Sets/queries the automatic control state for the Meas Pow Offset parameter.

ON = automatic

OFF = manual (see "CALL:HSDPa:MPOWer[:MOFFset]" or "CALL:HSDPa:MPOWer:OFFSet:MANual" )

This parameter can only be set either while the call status is Idle .

Setting

Range: 1|ON|0|OFF

Query

Range: 1|0

*RST Setting

Requirements

Lab Application Revision E.00.16 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:MPOWer:OFFSet:CONTrol:AUTO 0"
! Sets the Measurement Power Offset control state to manual.

Function

Sets/queries the Meas Pow Offset .

This parameter can only be set either while the call status is Idle .

This setting only applies when CALL:HSDPa:MPOWer:OFFSet:CONTrol:AUTO is set to OFF (manual).

Setting

Range: -6.0 to +13.0 dB

Resolution: 0.5

Query

Range: -6.0 to +13.0 dB, 9.91E+37

Resolution: 0.5

*RST Setting

Requirements

Lab Application Revision E.00.16 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:MPOWer:OFFSet:MANual -6"
! Sets the Measurement Offset Power to -6 dB.

Function

Sets/queries UE HS-DSCH Category Control .

This parameter can only be set when the data/call status is Idle .

Range: 1|ON|0|OFF

Query

Range: 1|0

*RST Setting

Requirements

Test Application Revision: A.09 and above, with the required feature license

Lab Application Revision: C.04 and above

Lab Application Revision: D.00 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:MS:HSDSchannel:CATegory:CONTrol:AUTO 0"

Function

Sets/queries Manual UE HS-DSCH Category .

This setting is only applicable when CALL:HSDPa:MS:HSDSchannel:CATegory:CONTrol:AUTO is set to 0 (manual) or if the UE reports an invalid category.

This parameter can only be set when the data/call status is Idle .

Range: 1-14, 17, 18

Query

*RST Setting

Requirements

Test Application Revision: A.09 and above, with the required feature license

Lab Application Revision: C.04 and above

Lab Application Revision: D.00 and above

Test Application Revision A.10 and Lab Application Revision D.01 added UE categories 7 and 8

Lab Application Revision F.00.07 expanded range from "1-8, 11, 12" to "1-14, 17, 18"

Programming Example

 
OUTPUT 714;"CALL:HSDPa:MS:HSDSchannel:CATegory:MANual 12"

Function

Queries the HSDPA Information: ACKs Received .

Query

Range: 0 to 150,000

Resolution: 1

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:MS:REPorted:ACK?"

Function

Queries the HSDPA Counters information and returns six comma separated results in the following order: Block Error Ratio (in %), Throughput (in kbps), ACKs Received, NACKs Received, statDTXs Received, Blocks Transferred.

Query

Block Error Ratio

• Range: 0 to 100%
• Resolution: 1%

Throughput

• Range: 0 to 99,999 kbps
• Resolution: 1 kbps

ACKs Received

• Range: 0 to 150,000
• Resolution: 1

NACKs Received

• Range: 0 to 150,000
• Resolution: 1

statDTXs Received

• Range: 0 to 150,000
• Resolution: 1

Blocks Transferred

• Range: 0 to 150,000
• Resolution: 1

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:MS:REPorted:ALL?"

Function

Queries the HSDPA Information: Blocks Transferred .

Query

Range: 0 to 150,000

Resolution: 1

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:MS:REPorted:BLOCks?"

Function

Queries the HSDPA Information: Block Error Ratio .

Query

Range: 0 to 100%

Resolution: 1%

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:MS:REPorted:HBLerror:RATio?"

Function

Queries the UE Reported HS-DSCH Category .

Query

Range: 1 to 64, 9.91E+37

Resolution: 1

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:MS:REPorted:HSDSchannel:CATegory?"

Function

Queries theUE Reported Extended HS-DSCH Category.

Query

Range: 1 to 64, 9.91E+37

Resolution: 1

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:MS:REPorted:HSDSchannel:CATegory:EXTension?"

Function

Queries the HSDPA Information: Throughput .

Query

Range: 0 to 99,999 kbps

Resolution: 1 kbps

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:MS:REPorted:IBTHroughput?"

Function

Queries the HSDPA Information: NACKs Received .

Query

Range: 0 to 150,000

Resolution: 1

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:MS:REPorted:NACK?"

Function

Queries the HSDPA Information: statDTXs Received .

Query

Range: 0 to 150,000

Resolution: 1

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:MS:REPorted:SDTX?"

Function

Sets/queries the PS Data Configuration Type .

This parameter cannot be set to 7 or less if CALL:HSDPa:SERVice:PSData:ITTI[:INTerval]:MINimum:CONTrol:AUTO is set to 656 bits.

The number of HS-PDSCHs specified by this command, when added to CALL:HSDPa:SERVice:PSData:HSPDschannel:CCODe cannot exceed 15.

Setting

Range: 5 to 30

Resolution: 1

Query

*RST Setting

Requirements

Lab Application Revision: C.04 and above

Lab Application Revision: D.00 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:PSData:CQI 19"
! Sets CQI Value to 19.

Function

Sets/queries the control state for the PS Data Number of HARQ Processes .

This parameter can only be changed while the call status is idle.

Setting

Range: 1|ON|0|OFF

Query

*RST Setting

Requirements

Lab Application Revision: E.00.13 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:PSData:HARQ:PROCess:COUNt:CONTrol:AUTO 1"
! Sets PS Data Minimum Inter-TTI Interval control state to Auto (1).

Function

Sets/queries the value of the PS Data Number of HARQ Processes .

This setting can be changed in any operating mode, however when the operating mode is Active Cell this setting can only be changed while the call status is idle.

Setting

Range: 1 to 8

Query

*RST Setting

Requirements

Lab Application Revision: E.00.13 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:PSData:HARQ:PROCess:COUNt:MANual 6"
! Sets the value of the PS Data Number of HARQ Processes to 6.

Function

Sets/queries PS Data Configuration Type .

Setting

Range: CQIValue|RCQI|UDEFined

Query

*RST Setting

Requirements

Lab Application Revision: E.00.13 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:PSData:HSDSchannel:CONFig CQIValue"
! Sets PS Data First HS-DSCH Type to CQI Value.

Function

Sets/queries the PS Data HS-DSCH MAC Entity.

This setting controls whether MAC-hs or MAC-ehs is to be used as the underlying MAC layer entity when working in HSDPA PS Data mode. This setting is also involved in determining the HS-DSCH TB Size table when the "PS Data HS-DSCH Configuration Type" is "User Defined".

Setting

Range: HSPeed (MAC-hs)|EHSPeed (MAC-ehs)

Query

Range: HSP)|EHSP

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:PSData:HSDSchannel:MAC HSPeed"
! Sets PS Data HS-DSCH MAC Entity to MAC-hs.

Function

Sets/queries the PS Data MAC-ehs HS-DSCH TB Size Table.

This setting is only used when the "PS Data HS-DSCH MAC Entity" parameter is "MAC-ehs", the "PS Data HS-DSCH 64QAM Configured State" is "Off", and the "PS Data HS-DSCH Configuration Type" is "User defined".This setting controls whether the bit-aligned HS-DSCH TB size table or octet-aligned HS-DSCH TB size table is used for a HSDPA PS Data call.

Setting

Range: BIT | OCTet

Query

Range: BIT | OCTet

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:PSData:MACEHS:HSDSchannel:TBSTable:ALIGnment OCTet"
! PS Data MAC-ehs HS-DSCH TB Size Table to Octet aligned.

Function

THIS COMMAND IS OBSOLETE. Please use CALL:HSDPa:SERVice:PSData:HSPDschannel:CCODe:CODE .

Sets/queries PS Data First HS-PDSCH Channel Code .

Setting

Range: CODE5|CODE6|CODE7|CODE8|CODE9|CODE10

Query

*RST Setting

Requirements

Lab Application Revision: C.04 and above

Lab Application Revision: D.00 and above

Lab Application Revision E.00, added CODE5 and CODE6, changed the default to CODE5 (from CODE7).

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:PSData:HSPDschannel:CCODe CODE9"
! Sets PS Data First HS-PDSCH Channel Code to 9.

Function

Sets/queries PS Data First HS-PDSCH Channel Code .

This parameter can not be changed in active cell operating mode (use cell off operating mode or FDD test operating mode to change this parameter).

Setting

Range: 1 to 15

Query

*RST Setting

Requirements

Lab Application Revision F.00 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:PSData:HSPDschannel:CCODe:CODE 5"
! Sets PS Data First HS-PDSCH Channel Code to 5.

Function

Sets/queries the control state for the PS Data Minimum Inter-TTI Interval .

Setting

Range: 1|ON|0|OFF

Query

*RST Setting

Requirements

Lab Application Revision: E.00.13 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:PSData:ITTI:MINimum:CONTrol:AUTO 1"
! Sets PS Data Minimum Inter-TTI Interval state to Auto (1).

Function

Sets/queries the value of the PS Data Minimum Inter-TTI Interval .

Setting

Range: 1 to 500

Query

*RST Setting

Requirements

Lab Application Revision: E.00.13 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:PSData:ITTI:MINimum:MANual 1"
! Sets PS Data Minimum Inter-TTI Interval value to 1.

Function

Sets/queries PS Data User Defined Active HS-PDSCHs .

This parameter cannot be set to 656 bits if CALL:HSDPa:SERVice:PSData:CQI[:VALue] is set to 7 or less.

This parameter can only be changed when connection status is idle.

Setting

Range: BITS336|BITS656

Query

*RST Setting

Requirements

Lab Application Revision: E.00 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:PSData:MACD:PDUSize BITS656"
! Sets PS Data HS-DSCH MAC-d PDU Size to 656 Bits.

Function

Sets/queries PS Data UE IR Buffer Allocation .

Setting

Range: IMPLicit|EXPLicit

Query

Range: IMPLicit|EXPLicit

*RST Setting

Requirements

Lab Application Revision: E.00.13 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:PSData:MS:IREDundancy:BUFFer:ALLocation IMPLicit"
! Sets PS Data UE IR Buffer Allocation to Implicit.

Function

Sets/queries PS Data Explicit UE IR Buffer Size .

Setting

800, 1600, 2400, 3200, 4000, 4800, 5600, 6400,7200, 8000, 8800, 9600, 10400, 11200, 12000, 12800, 13600, 14400, 15200, 16000, 17600, 19200, 20800, 22400, 24000, 25600, 27200, 28800, 30400, 32000, 36000, 40000, 44000, 48000, 52000, 56000, 60000, 64000, 68000, 72000, 76000, 80000, 88000, 96000, 104000, 112000, 120000, 128000, 136000, 144000, 152000, 160000, 176000, 192000, 208000, 224000, 240000, 256000, 272000, 288000, 304000

Query

*RST Setting

Requirements

Lab Application Revision: E.00.13 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:PSData:MS:IREDundancy:BUFFer:SIZE 192000"
! Sets PS Data Explicit UE IR Buffer Size to 192000.

Function

Sets/queries PS Data HS-DSCH 64QAM Configured State.

This setting is only used when "PS Data HS-DSCH MAC Entity" is "MAC-ehs". This setting controls whether the "Downlink 64QAM configured" IE will be sent to the UE during a PS Data call setup procedure. This setting also controls the encoding format of HS-SCCH when the "PS Data HS-DSCH MAC Entity" is MAC-ehs.

Setting

Range: 1|ON|0|OFF

Query

Range: 1|0

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:PSData:QAM64:STATe 0"
! Sets PS Data HS-DSCH 64QAM Configured State to off.

Function

Sets/queries Downlink Flexible AM RLC Header Extension Special Value.

This setting controls whether the "Use Special HE Field Value" IE is present and configured to the UE in L3 signalling.

• When set to EXCLude, this IE is not present when the test set configures the UE's RLC and a 15-bit Length Indicator (LI) is used for each AM RLC PDU.
• When set to INCLude, the "Use Special HE field value" IE is included to configure the UE's RLC in L3 signalling. In this case, the Length Indicator (LI) is not included in the AM RLC PDU, instead, a special value of HE field (binary '10') is used to indicate the RLC PDU contains exactly one RLC SDU.

This setting is only used when the "PS Data HS-DSCH MACEntity" is "MAC-ehs" and the "Downlink AM RLC Mode" is "Flexible".

Setting

Range: INCLude | EXCLude

Query

Range: INCL | EXCL

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:PSData:RLC:DOWNlink:HEXTension:SVALue EXCLude"

Function

Sets/queries Downlink AM RLC Mode.

This setting is only used when the "PS Data HS-DSCH MACEntity" is "MAC-ehs". This setting controls whether downlink AM RLC working in fixed mode or flexible mode:

• When set to "fixed", the "PS Data HS-DSCH MAC-d PDU Size" will be used as the fixed mac-d pdu size (RLC PDU size).
• When set to "flexible", the "PS Data HS-DSCH MAC-d PDU Size" will not be used any more. Instead, flexible AM RLC PDU Size will be used in the downlink AM RLC layer and RLC layer will not do segmentation based on RLC PDU size. Every AM RLC SDU will be exactly packed into a RLC PDU.

Setting

Range: FIXed | FLEXible

Query

Range: FIX | FLEX

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:PSData:RLC:DOWNlink:MODE "
! Sets Downlink AM RLC Mode to Fixed.

Function

Sets/queries the PS Data User Defined Active HS-PDSCHs parameter.

Setting

Range: 1 to 10

Query

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:PSData:UDEFined:HSPDschannel:COUNt 5"
! Sets the number of PS Data User Defined Active HS-PDSCHs to 5.

Function

Sets/queries the PS Data User Defined Modulation Type .

Setting

Range: QAM16|QPSK|QAM64

Query

*RST Setting

Requirements

Lab Application Revision E.00.13 and above

Lab Application Revision: F.00.19, added QAM64

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:PSData:UDEFined:MODulation QAM16"
! Sets PS Data User Defined Modulation Type to 16QAM.

Function

Sets/queries the PS Data User Def Transport Block Size Index .

Setting

Range: 0 to 62

Query

*RST Setting

Requirements

Lab Application Revision E.00.13 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:TBSize:INDex 48"
! Sets the PS Data User Def Transport Block Size Index to 48.

Function

Sets/queries CN Domain .

This parameter can only be set when call status is Idle .

Setting

Range: CSDomain|CSPSdomain|PSDomain

Query

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Test Application Revision A.10.01 and Lab Application Revision D.01.01 added CSPSdomain.

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:RBTest:CNDomain CSDomain"
! Sets CN Domain to CS Domain.

Function

Sets/queries Uplink 0k DTCH for HSDPA Loopback State .

This parameter cannot be set to On when CALL:HSDPa:SERVice:RBTest[:DTCHannel64]:HLOopback:STATe is set to On .

This parameter can only be set when call status is Idle .

Setting

Range: 1|ON|0|OFF

Query

Range: 1|0

*RST Setting

Requirements

Test Application Revision A.10.01 and above, with the required feature license

Lab Application Revision D.01.01 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:RBTest:DTCHannel0:HLOopback:STATe 1"
! Turns Uplink 0k DTCH for HSDPA Loopback State on.

Function

Sets/queries the RB Test Mode F-DPCH State .

Setting

Range: 1|ON|0|OFF

Query

Range: 1|0

*RST Setting

Requirements

Lab Application Revision F.00 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:RBTest:FDPChannel:STATe OFF"
! Turns the RB Test Mode F-DPCH State off.

Function

Sets/queries the FRC H-Set 8 UE IR Buffer Size.

This Setting controls the RB Test Mode H-Set 8 UE IR Buffer Size, either 40000 bits or as specified in 25.101v870. If this setting is Standard (STD), the test set will determine the IR buffer size per HARQ process.

Setting

Range: 40000|STD

Query

*RST Setting

Requirements

Test Application Revision A.15 and above.

Lab Application Revision: F.01 and above.

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:RBTest:FRC:HSET8:MS:IREDundancy:BUFFer:SIZE 40000" 
! Sets FDD Test Mode FRC H-Set 8 UE IR Buffer Size to 40000 bits.

Function

Sets/queries FRC MAC-d PDU Size .

This parameter can only be set when call status is Idle , and is only applicable when CALL:HSDPa:SERVice:RBTest:HSDSchannel:CONFig[:TYPE] is set to FRC .

Setting

Range: BITS112|BITS336|BITS656|MHSMax

Query

Range: BITS112|BITS336|BITS656|MHSM

*RST Setting

Requirements

Test Application Revision: A.09 and above, with the required feature license

Lab Application Revision: C.04 and above

Lab Application Revision: D.00 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:RBTest:FRC:MACD:PDUSize BITS112"
! Sets FRC MAC-d PDU Size to 112 bits.

Function

Sets/queries FRC Type .

This parameter can only be set when call status is Idle .

Setting

Range: QAM1|QAM2|QAM3|QAM6|QAM64H8|QAM16H10|QPSK1|QPSK2|QPSK3|QPSK4|
QPSK5|QPSK6|QPSKH10

Query

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Test Application Revision A.10.01 and Lab Application Revision D.01.01 added QAM6 and QPSK6.

Lab Application Revision F.00 added QAM64H8, QAM16H10, QPSKH10

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:RBTest:FRC:TYPE QPSK5"
! Sets FRC Type to H-Set 5 QPSK.

Function

Sets/queries Uplink 64k DTCH for HSDPA Loopback State .

This parameter cannot be set to On when CALL:HSDPa:SERVice:RBTest:DTCHannel0:HLOopback:STATe is set to On .

This parameter can only be set when call status is Idle .

Setting

Range: 1|ON|0|OFF

Query

Range: 1|0

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Test Application Revision A.10.01 and Lab Application D.01.01 added [:DTCHannel64]

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:RBTest:HLOopback:STATe 1"
! Turns Uplink 64k DTCH for HSDPA Loopback State on.

Function

THIS COMMAND IS OBSOLETE. Please use CALL:HSDPa:SERVice:RBTest:HSPDschannel:CCODe:CODE .

Sets/queries RB Test Mode First HS-PDSCH Channel Code .

Setting

Range: CODE5|CODE6|CODE7|CODE8|CODE9|CODE10

Query

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Test Application Revision A.10.01 and Lab Application Revision D.01.01 added CODE5, CODE6

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:RBTest:HSPDschannel:CCODe CODE9"
! Sets RB Test Mode First HS-PDSCH Channel Code to 9.

Function

Sets/queries RB Test Mode First HS-PDSCH Channel Code .

This parameter can not be changed in active cell operating mode (use cell off operating mode or FDD test operating mode to change this parameter).

This parameter cannot be set to 5 or 6 when S-CCPCH Channelization Code is set to 26.

Setting

Range: 1 to 15

Query

*RST Setting

Requirements

Lab Application Revision F.00 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:RBTest:HSPDschannel:CCODe:CODE 7"
! Sets RB Test Mode First HS-PDSCH Channel Code to 7.

Function

Sets/queries RB Test HS-DSCH Configuration Type .

This parameter can only be changed while the call status is idle.

Setting

Range: FRC|UDEFined

Query

Range: FRC|UDEF

*RST Setting

Requirements

Test Application Revision: A.09 and above, with the required feature license

Lab Application Revision: C.04 and above

Lab Application Revision: D.00 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:RBTest:HSDSchannel:CONFig UDEFined"
! Sets HS-DSCH Configuration Type to User Defined

Function

Sets/queries HS-DSCH Data Pattern .

Setting

Range:

• ABITs (Alternating)
• INCRement (Incrementing)
• ONES (All Ones)
• PRBS23 (CCITT PRBS23)
• PRBS20 (CCITT PRBS20)
• PRBS15 (CCITT PRBS15)
• PRBS9 (CCITT PRBS9)
• ZERos (All Zeros)

Query

Range:

• ABIT (Alternating)
• INCR (Incrementing)
• ONES (All Ones)
• PRBS23 (CCITT PRBS23)
• PRBS20 (CCITT PRBS20)
• PRBS15 (CCITT PRBS15)
• PRBS9 (CCITT PRBS9)
• ZER (All Zeros)

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Lab Application Revision: F.00 added PRBS23 and PRBS20

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:RBTest:HSDSchannel:DATA PRBS9"
! Sets HS-DSCH Data Pattern to CCITT PRBS9.

Function

Sets/queries RLC Header on HS-DSCH .

This parameter can only be set when call status is Idle .

Setting

Range: PRESent|DATA

Query

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:RBTest:HSDSchannel:RLCHeader DATA"
! Sets RLC Header on HS-DSCH to Absent.

Function

Sets/queries User Defined Number of HARQ Processes .

This setting can only be changed when call status is idle.

Setting

Range: 1 to 8

Resolution: 1

Query

*RST Setting

Requirements

Test Application Revision: A.09 and above, with the required feature license

Lab Application Revision: C.04 and above

Lab Application Revision: D.00 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:RBTest:UDEFined:HARQ:PROCess:COUNt 1"
! Sets User Defined Number of HARQ Processes to 1.

Function

Setting

Range: HSPeed | EHSPeed

Query

*RST Setting

Requirements

Lab Application Revision: F.00 and above

Test Application Revision: A.14 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:RBTest:UDEFined:HSDSchannel:MAC HSPeed"
! Sets the RB Test Mode HS-DSCH MAC entity to MAC-hs.

Function

Setting

Range: 1 to 10

Resolution: 1

Query

*RST Setting

Requirements

Test Application Revision: A.09 and above, with the required feature license

Lab Application Revision: C.04 and above

Lab Application Revision: D.00 and above

Test Application Revision A.10 and Lab Application Revision D.01 expanded range from "1 to 5" to "1 to 10"

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:RBTest:UDEFined:HSPDschannel:COUNt 3"
! Sets User Defined Number of Active HS-PDSCHs to 3.

Function

Setting

Range: 1 to 3

Resolution: 1

Query

*RST Setting

Requirements

Test Application Revision: A.09 and above, with the required feature license

Lab Application Revision: C.04 and above

Lab Application Revision: D.00 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:RBTest:UDEFined:ITTI 2"
! Sets User Defined Inter-TTI Interval to 2.

Function

Setting

Range: BIT | OCTet

Query

*RST Setting

Requirements

Lab Application Revision: F.00 and above

Test Application Revision: A.14 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:RBTest:UDEFined:MACEHS:HSDSchannel:TBSTable:ALIGnment OCTet"
! Sets the RB Test Mode MAC-ehs HS-DSCH TB size table to octet-aligned.

Function

Setting

Range: 1 to 1503

Resolution: 1

Query

*RST Setting

Requirements

Lab Application Revision: F.00 and above

Test Application Revision: A.14 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:RBTest:UDEFined:MACEHS:RLC:SDU 300"
! Sets the RB Test Mode Flexible RLC SDU Size to 300.

Function

Setting

Range: QPSK|QAM16|QAM64

Query

*RST Setting

Requirements

Test Application Revision: A.09 and above, with the required feature license

Lab Application Revision: C.04 and above

Lab Application Revision: D.00 and above

Lab Application Revision: F.00 and above added QAM64

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:RBTest:UDEFined:MODulation QAM16"
! Sets User Defined Modulation Type to 16QAM.

Function

Sets/queries User Defined UE IR Buffer Allocation .

This setting can only be changed when call status is idle.

Setting

Range: IMPLicit|EXPLicit

Query

*RST Setting

Requirements

Test Application Revision: A.09 and above, with the required feature license

Lab Application Revision: C.04 and above

Lab Application Revision: D.00 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:RBTest:UDEFined:MS:IREDundancy:BUFFer:ALLocation EXPLicit"
! Sets User Defined UE IR Buffer Allocation to Explicit.

Function

Sets/queries User Defined Explicit UE IR Buffer Size .

This setting is only applicable when CALL:HSDPa:SERVice:RBTest:UDEFined:MS:IREDundancy:BUFFer:ALLocation is set to EXPLicit.

This setting can only be changed when call status is idle.

Setting

Range: 800, 1600, 2400, 3200, 4000, 4800, 5600, 6400, 7200, 8000, 8800, 9600, 10400, 11200, 12000, 12800, 13600, 14400, 15200, 16000, 17600, 19200, 20800, 22400, 24000, 25600, 27200, 28800, 30400, 32000, 36000, 40000, 44000, 48000, 52000, 56000, 60000, 64000, 68000, 72000, 76000, 80000, 88000, 96000, 104000, 112000, 120000, 128000, 136000, 144000, 152000, 160000, 176000, 192000, 208000, 224000, 240000, 256000, 272000, 288000, 304000

Query

*RST Setting

Requirements

Test Application Revision: A.09 and above, with the required feature license

Lab Application Revision: C.04 and above

Lab Application Revision: D.00 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:RBTest:UDEFined:MS:IREDundancy:BUFFer:SIZe 9600"
! Sets User Defined Explicit UE IR Buffer Size to 9600.

Function

Sets/queries the User Defined 64QAM State .

This parameter is used when CALL:HSDPa:SERVice:RBTest:UDEFined:HSDSchannel:MAC is set to MAC-ehs.

Setting

Range: 1|ON|0|OFF

Query

Range: 1|0

*RST Setting

Requirements

Lab Application Revision: F.00 and above

Test Application Revision: A.14 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:RBTest:UDEFined:QAM64:STATe OFF" 

Function

Sets/queries User Defined Transport Block Size Index .

You can query the transport block size using the CALL:STATus:HSDSchannel:TBSize? query.

Setting

Range: 0 to 62

Resolution: 1

Query

*RST Setting

Requirements

Test Application Revision: A.09 and above, with the required feature license

Lab Application Revision: C.04 and above

Lab Application Revision: D.00 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:SERVice:RBTest:UDEFined:TBSize:INDex 48"
! Sets User Defined Transport Block Size Index to 48.

Function

Sets/queries DeltaACK .

This parameter can only be set when call status is Idle .

Setting

Range: 0 to 8

Resolution: 1

Query

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:UPLink:DACK 7"
! Sets DeltaACK to 7.

Function

Sets/queries DeltaCQI .

This parameter can only be set when call status is Idle .

Setting

Range: 0 to 8

Resolution: 1

Query

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:UPLink:DCQI 3"
! Sets DeltaCQI to 3.

Function

Sets/queries DeltaNACK .

This parameter can only be set when call status is Idle .

Setting

Range: 0 to 8

Resolution: 1

Query

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:UPLink:DNACk 5"
! Sets DeltaNACK to 5.

Function

Sets/queries Ack-Nack Repetition Factor .

This parameter can only be set when call status is Idle .

Setting

Range: 1 to 4

Resolution: 1

Query

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:UPLink:ANACk:RFACtor 2"
! Sets ACK-NACK Repetition Factor to 2.

Function

Sets/queries CQI Feedback Cycle (k) .

This parameter can only be set when call status is Idle .

CQI Feedback Cycle (k) must be greater than or equal to CQI Repetition Factor * 2ms (except for the case when CQI Feedback Cycle (k) equals 0 ms). See CALL:HSDPa:UPLink:CQI:RFACtor .

Setting

Range: 0, 2, 4, 8, 10, 20, 40, 80, 160 ms

Note, the default unit for this command is seconds. If you enter a value without a unit (S|MS|US|NS), the test set assumes the value you've entered is in seconds.

Query

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:UPLink:CQI:FCYCle 8 MS"
! Sets CQI Feedback Cycle (k) to 8 ms.

Function

Sets/queries CQI Repetition Factor .

This parameter can only be set when call status is Idle .

CQI Feedback Cycle (k) must be greater than or equal to CQI Repetition Factor * 2ms (except for the case when CQI Feedback Cycle (k) equals 0 ms). See CALL:HSDPa:UPLink:CQI:FCYCle .

Setting

Range: 1 to 4

Resolution: 1

Query

*RST Setting

Requirements

Test Application Revision A.08.20 and above, with the required feature license.

Lab Application Revision C.03 and above

Programming Example

 
OUTPUT 714;"CALL:HSDPa:UPLink:CQI:RFACtor 2"
! Sets CQI Repetition Factor to 2.