CALL:MS:REPorted

Function

Queries the UE Reported Failure Cause .

Query

Range: 1 to 255, 9.91E +37

*RST Setting

9.91E +37

Test Application Revision: A.03 and above.

Lab Application Revision: A.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:AUTHenticate:FAILcause?"
!Queries the authentication fail cause.

Function

Queries the UE (mobile station) reported measurement results after a successful Measurement Request (see CALL:MS:REPorted:MEASurement:REQuest ). The measurement results returned include CPICH Ec/No, Pathloss and CPICH RSCP (see UE Reported Measurements for more descriptions).

After a successful Measurement Request, three comma separated results are returned in the order of CPICH Ec/No, Pathloss, and CPICH RSCP. See CALL:MS:REPorted[:CELL[1]]:CPICh:ECNO? , CALL:MS:REPorted[:CELL[1]]:PATHloss? , and CALL:MS:REPorted[:CELL[1]]:CPICh:RSCP? for more information.

To obtain DTCH BLER results, see CALL:MS:REPorted[:CELL[1]]:DTCH:BLER? .

Query

CPICH Ec/No:

• Range: 0 to 49, 9.91E +37

Pathloss:

• Range: 46 to 158 dB, 9.91E +37
• Resolution: 1 dB

CPICH RSCP:

• Range: 0 to 91, 9.91E +37

*RST Setting

Test Application Revision: A.03 and above.

Lab Application Revision: A.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:ALL?"

Function

Queries the UE (mobile station) reported CPICH Ec/No measurement result which is an index to a range of Ec/No values. See CPICH Ec/No for the mapping of this report value to actual Ec/No range.

Query

Range: 0 to 49, or 9.91 E+37

*RST Setting

Test Application Revision: A.03 and above.

Lab Application Revision: A.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:CPICh:ECNO?"

Function

Queries the UE (mobile station) reported CPICH RSCP measurement result which is an index to a range of RSCP values. See CPICH RSCP (Received Signal Code Power) for the mapping of this report value to actual RSCP range.

Query

Range: 0 to 91, or 9.91 E+37

*RST Setting

Test Application Revision: A.03 and above.

Lab Application Revision: A.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:CPICh:RSCP?"

Function

Queries the UE (mobile station) reported Pathloss measurement result in the unit of dB. See Pathloss for more details.

Query

Range: 46 to 158 dB, or 9.91 E+37

Resolution: 1 dB

*RST Setting

Test Application Revision: A.03 and above.

Lab Application Revision: A.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:PATHloss?"

Function

Queries the UE (mobile station) reported DTCH BLER measurement result which is an index to a range of BLER values. See DTCH BLER (Block Error Ratio) Report for the mapping of this report value to actual BLER range.

Query

Range: 0 to 63, or 9.91 E+37

*RST Setting

Test Application Revision: A.03 and above.

Lab Application Revision: A.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:DTCH:BLER?"

Function

Queries the cell 2 UE (mobile station) reported measurement results after a successful Measurement Request (see CALL:MS:REPorted:MEASurement:REQuest ). The supported measurements include CPICH Ec/No, Pathloss and CPICH RSCP (see Cell 1/Cell 2 UE Reported Measurements for more information).

After a successful Measurement Request, three comma separated results are returned in the order of CPICH Ec/No, Pathloss, and CPICH RSCP. See CALL:MS:REPorted[:CELL[1]]:CPICh:ECNO? , CALL:MS:REPorted[:CELL[1]]:PATHloss? , and CALL:MS:REPorted[:CELL[1]]:CPICh:RSCP? for more information.

To obtain DTCH BLER results, see CALL:MS:REPorted[:CELL[1]]:DTCH:BLER? .

Query

CPICH Ec/No:

• Range: 0 to 49, 9.91E +37

Pathloss:

• Range: 46 to 158 dB, 9.91E +37
• Resolution: 1 dB

CPICH RSCP:

• Range: 0 to 91, 9.91E +37

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:CELL2:ALL?"

Function

Queries the cell 2 UE (mobile station) reported CPICH Ec/No measurement result which is an index to a range of Ec/No values. See CPICH Ec/No for the mapping of this report value to actual Ec/No range.

Query

Range: 0 to 49, 9.91E +37

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:CELL2:CPICh:ECNO?"

Function

Queries the cell 2 UE (mobile station) reported CPICH RSCP measurement result which is an index to a range of RSCP values. See CPICH RSCP (Received Signal Code Power) for the mapping of this report value to actual RSCP range.

Query

Range: 0 to 91, 9.91E +37

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:CELL2:CPICh:RSCP?"

Function

Queries the UE reported SFN-SFN Observed Time Difference (OTD) measurement result. The type of OTD measurement performed by the UE can be queried using the CALL:MS:REPorted:CELL2:OTDifference:TYPE? command.

Query

Range: 0 to 9830399 chips, 9.91E +37

Resolution: 1 chip

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:CELL2:OTDifference?"

Function

Queries the type of SFN-SFN Observed Time Difference (OTD) measurement performed by the UE. The UE reported OTD measurement result can be queried using the CALL:MS:REPorted:CELL2:OTDifference[:VALue]? command.

Query

Range: NONE|TYPE1|TYPE2

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:CELL2:OTDifference:TYPE?"

Function

Queries the cell 2 UE reported Pathloss measurement result.

Query

Range: 46 to 158 dB, 9.91E +37

Resolution: 1 dB

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:CELL2:PATHloss?"

Function

Test Application Revision: A.04 and above

Lab Application Revision: A.02 and above

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:CLEar"

Function

Queries the UE Reported Max Context Session.

This result is extracted from the "PDCP Capability" IE in the RRC Connection Setup Complete message. If the UE did not report this, NaN is returned. This value is used to determine the MAX_CID parameter for both uplink and downlink that will be used to configure the UE.

Query

Range: 1 to 16383, 9.91E +37

*RST Setting

9.91E +37

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:CONText:SESSion:MAXimum?"
!Queries the UE Reported Max Context Session.

Function

Queries the UE Reported Downlink Reverse Decompression Depth.

This result is extracted from the "PDCP Capability" IE in the RRC Connection Setup Complete message. If the UE did not report this, NaN is returned.

Query

Range: 0 to 65535, 9.91E +37

*RST Setting

9.91E +37

Programming Example

 
OUTPUT 714;"ALL:MS:REPorted:DOWNlink:RDDepth?"
!Queries the UE Reported Downlink Reverse Decompression Depth.

Function

Queries the International Mobile station Equipment Identity and Software Version number (IMEISV) reported by the UE. This result is not available when CALL[:CELL]:EIDentity:REQuest] is set to "IMEI". The IMEISV is composed of the following elements:

- Type Allocation Code (TAC). Its length is 8 digits;- Serial Number (SNR) is an individual serial number uniquely identifying each equipment within each TAC. Its length is 6 digits;- Software Version Number (SVN) identifies the software version number of the mobile equipment. Its length is 2 digits.

Query

*RST Setting

Lab Application Revision: E.00.34 and above.

Test Application Revision: A.13 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:EISV?"

Function

Queries only the Software Version Number (SVN) element of the IMEISV reported by the UE. The SVN identifies the software version number of the mobile equipment. Its length is 2 digits.

This result is not available when CALL[:CELL]:EIDentity:REQuest] is set to "IMEI".

Query

*RST Setting

Lab Application Revision: E.00.34 and above.

Test Application Revision: A.13 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:EISV:SVN?"

Function

Queries the "Band A" transmit/receive frequency separation. The specified frequencies are as follows: 190 MHz (MHZ190, fixed frequency separation), 174.8 to 205.2 MHz (MHZV205, variable frequency separation within this range), 134 to 245.2 MHz (MHZV245, variable frequency separation within this range).

Query

*RST Setting

Test Application Revision: A.02 and above.

Lab Application Revision: A.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:FREQuency?"

Function

Query

Range: 0 to 1023, 9.91E+37

Resolution: 1

*RST Setting

Lab Application Revision: B.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:GSMSystem:BCHannel?"

Function

Query

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:GSMSystem:BSIC:VALue?"

Function

Query

Range:

• VER - Verified
• NVER - Not Verified
• NREP - the cell was not measured by the UE

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:GSMSystem:BSIC:VERification?"

Function

Query

Range: 1 to 8, 9.91E+37

Resolution: 1

*RST Setting

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:GSMSystem:CIDentity?"

Function

Query

Range: 0 to 8

Resolution: 1

*RST Setting

Lab Application Revision: B.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:GSMSystem:CELLs?"

Function

Query

Range: 0 to 63, 9.91E+37

Resolution: 1

*RST Setting

Lab Application Revision: B.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:GSMSystem:RSSI?"

Function

Queries the mobile reported IMEI .

Query

Range: "0" to "FFFFFFFFFFFFFF" (0 to 15 characters from the set 0123456789ABCDEF) or "" (null string)

*RST Setting

"" (null string)

Test Application Revision: A.02 and above.

Lab Application Revision: A.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:IMEI?"

Function

Queries the mobile reported IMSI .

Query

Range: "0" to "FFFFFFFFFFFFFF" (0 to 15 characters from the set 0123456789ABCDEF) or "" (null string)

*RST Setting

Test Application Revision: A.02 and above.

Lab Application Revision: A.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:IMSI?"

Function

Query

Range: 0 to 32

Resolution: 1

*RST Setting

Lab Application Revision: B.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:ITRFrequency:CELLs?"

Function

Query

Range: 0 to 16383, 9.91E+37

Resolution: 1

*RST Setting

Lab Application Revision: B.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:ITRFrequency:DOWNlink:CHANnel?"

Function

Query

Range: 0 to 49, 9.91E+37

Resolution: 1

*RST Setting

Lab Application Revision: B.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:ITRFrequency:ECNO?"

Function

Query

Range: 46 to 158 dB, 9.91E+37

Resolution: 1 dB

*RST Setting

Lab Application Revision: B.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:ITRFrequency:PATHloss?"

Function

Query

Range: 0 to 91, 9.91E+37

Resolution: 1

*RST Setting

Lab Application Revision: B.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:ITRFrequency:RSCP?"

Function

Query

Range: 0 to 76, 9.91E+37

Resolution: 1

*RST Setting

Lab Application Revision: B.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:ITRFrequency:RSSI?"

Function

Query

Range: 0 to 511, 9.91E+37

Resolution: 1

*RST Setting

Lab Application Revision: B.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:ITRFrequency:SCODe?"

Function

Sets/queries the UTRA FDD UE Internal Measurement State.

This setting controls whether the UE internal measurement is requested from the UE the next time that the Send Measurement Request action is invoked.

Setting

Range: 1|ON|0|OFF

Query

Range: 1|0

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:MEASurement:INTernal:STATe 0"
! Sets UTRA FDD UE Internal Measurement State to off.

Function

Sets/queries UTRA FDD Intra-frequency Measurement State.

This setting controls whether the intra-frequency measurement is requested from the UE the next time that the Send Measurement Request action is invoked.

Setting

Range: 1|ON|0|OFF

Query

Range: 1|0

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:MEASurement:ITAFrequency:STATe 1"
! Sets UTRA FDD Intra-frequency Measurement State to on.

Function

Sets/queries the SFN-SFN OTD Measurement Type performed by the UE when the CALL:MS:REPorted:MEASurement:REQuest command is sent.

Lab Application Revision: C.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:MEASurement:OTDifference:TYPE TYPE2"
! Sets SFN-SFN OTD Measurement Type to Type 2.

Function

Sets/queries UTRA FDD Quality Measurement State.

Setting

Range: 1|ON|0|OFF

Query

Range: 1|0

*RST Setting

Requirements

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:MEASurement:QUALity:STATe 0"
! Sets UTRA FDD Quality Measurement State to off.

Function

Sends a Measurement Control message, which orders the UE to perform measurements on cell 1 (and cell 2 if you are using the lab application). Which measurements are performed by the UE is determined by the CALL:MS:REPorted:MEASurement:TYPe and CALL:MS:REPorted:MEASurement:OTDifference:TYPE commands.
See Cell 1/Cell 2 UE Reported Measurements .

Test Application Revision: A.03 and above.

Lab Application Revision: A.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:MEASurement:REQuest"

Function

Range: ALL|INTRAFREQ|QUAL

Query

*RST Setting

Test Application Revision: A.05 and above.

Lab Application Revision: B.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:MEASurement:TYPe ALL"

Function

Queries the Called Party Number .

Query

Range: 0 to 20 characters enclosed by double quotes, from the set 0123456789.*# or "Emergency Call" or "" (null string).

*RST Setting

Lab Application Revision: C.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:ONUMber?"

Function

Queries the mobile reported Power Class .

Query

Range: 1, 2, 3, 4, 9.91E+37

*RST Setting

Test Application Revision: A.02 and above.

Lab Application Revision: A.01 and above.

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:PCLass?"

Function

Queries the Detected PRACH Signature .

Query

Range: 0 to 15, 9.91E+37

*RST Setting

9.91E+37

Programming Example

 
OUTPUT 714;"CALL:MS:REPorted:PRAChannel:SIGnature?"

Function

Queries the UTRA FDD UE Transmitted Power as an index.

The mapping of the reported value to actual UE transmission power range is provided in 3GPP TS 25.133 V7.d.0 section 9.1.6.2, "UE transmitted power measurement report mapping".

Query

Range: 0 to 104

Programming Example

 
OUTPUT 714;"CCALL:MS:REPorted:TRANsmit:POWer?"
!Queries the the UTRA FDD UE Transmitted Power.